iON SnapCam LE Benutzerhandbuch

Typ
Benutzerhandbuch
iON SnapCam LE™
Quick Start Guide
EN-2
Removing from the box
Step 1 Step 2 Step 3
Pull out the
transparent box.
Loosen the camera
stand by turning
clockwise.
Take out the camera
stand.
Step 4 Step 5 Step 6
Loosen the
screw by turning
counterclockwise.
Detach the camera
stand from the
camera frame.
Remove the screw.
EN-3
1. Function Keys & Interface
1
1. Lens
2. Microphone
3. Battery Lamp
4. Shutter Button
5. LED Indicator
6. Power/Mode Button
2 3 4 5
6
LED Indicator:
Green: Still/Burst
Orange: Time Lapse
Red: Video recording
EN-4
7
8
7. USB Port
8. MicroSD Slot
2. First Time Use
• Charge SnapCam LE's built-in battery before use. Simply connect
Micro USB (Type B) cable to the USB port of camera.
• Insert MicroSD card (not included) in SnapCam LE's MicroSD Slot.
• Time and date automatically set after SnapCam LE connects
to Smartphone APP or PC/Mac. Please refer to section 7 for
Smartphone Connection.
3. Mode Settings
• Press Power/Mode button.
• LED will change color to indicate current mode; will beep twice to
indicate mode change.
EN-5
• Mode will change in this order: Still/Single > Time Lapse > Video/
Normal.
• Still/Burst and Video/Loop set from Smartphone App SnapCam
LE.
4. Still Capture (Single)
• Power ON SnapCam LE by pressing Power/Mode button.
• Set "Mode" to Still/Single.
• Press Shutter button.
• Double beep indicates shutter release.
5. Video Recording
• Power ON SnapCam LE by pressing Power/Mode button.
• Change Mode to Video/Normal, then press Shutter button
• LED will blink continuously during video recording.
• Single beep means video recording has started.
• Stop video recording by pressing and holding the Shutter button for
2 seconds.
• Double beep sound indicates video recording has stopped.
EN-6
6. Connect to PC
• Ensure SnapCam LE is off, connect to PC via USB Cable.
• The camera will show "Power Charging" icon.
• Press Power/Mode button, the camera will act as a USB storage
device.
• The camera will beep twice, LED will blink Orange. After the camera
connects to PC successfully, the LED will blink green.
7. Smartphone Connection
(1)Settingtheconnectionrsttime
• Turn on the camera before going to the next step.
• Ensure Bluetooth is ON the smart device.
• Open the SnapCam LE App will connect to Bluetooth on the
camera, and then camera's Wi-Fi will be activated automatically.
• Tap Connect Option to enter the Bluetooth selection screen, and
tap the text bar of device name to choose Bluetooth device. Tap
Wake up button to wake up device's Wi-Fi.
• To connect the camera, select the camera's Wi-Fi SSID from
smartphone's setting. Or enter SSID and password (0123456789)
for auto connection.
EN-7
(2) Connect for the second time, open SnapCam LE App and click OK
for auto connection.
SnapCam LE App
8. Usage Note
• If water is spilled onto the camera, place camera MicroSD port
downwards so water does not enter the camera body.
• When PC USB charging does not work because the camera has not
been used for a long time or used properly, please charge with a DC
Adapterrst.
EN-8
FCC Statement
Warning:Changesormodicationstothisunitnotexpresslyapproved
by the party responsible for compliance could void the user’s authority
to operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
EN-9
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
TRADEMARK INFORMATION
© 2015 World Wide Licenses Limited.
® The iON logo is a registered trademark of World Wide Licenses Limited
Questions?
Need Some Help?
This manual should
help you understand
your new product.
If you still have
questions,
visit our website:
www.ioncamera.com
Like Us:
www.facebook.com/ioncamera
Tweet Us:
www.twitter.com/ioncamera
EN-10
Learn more.
Learn more about iON camera features at http://www.ioncamera.com
For instructions and safety information, see the iON User Guide.
Download the PDF at http://www.ioncamera.com/user-manuals/
Get support. (i.e. Warranty)
Visit https://www.ioncamera.com/support/ for all iON camera support.
If you are located in the United States of America, please contact
Customer Service at 855-411-4466. If you are located in Canada,
please contact Customer Service at 905-513-7733.
If you are located outside of the United States of America or Canada
please visit www.ioncamera.com for your local support service
iON SnapCa
m LE
Schnellstartanleitung
DE-2
Entfernen aus der Box
Schritt 1 Schritt 2 Schritt 3
Ziehen Sie den
transparenten Box.
sen Sie die
Kamerahalterug
durch Drehen
im
Uhrzeigersinn
Nehmen Sie die
Kamera von der
Halterung
Schritt 4 Schritt 5 Schritt 6
sen Sie die
Schraube
gegen den
Uhrzeigersinn
drehen.
Trennen Sie die
Kamera
Halterung von
die Kamera
Gestell.
Entfernen Sie
die Schraube
DE-3
1. Hauptmerkmale & Interface
1. Objektiv
2. Mikrofon
3. Batterie-LED
4. Verschluss Taste
5. LED Anzeige
6. Netzschalter/ ModusTaste
LED Anzeige:
Grün:Still/Burst
Orange: Zeitraffer
Red: Video Aufzeichen
DE-4
7. USB Anschluss
8. MicroSD Speicherplatz
2. Erstbenutzer
Aufladen der in der SnapCam LE integrierten Akku vor dem
Gebrauch. Verbinden Sie einfach Micro USB (Typ B) Kabel an den
USB-Anschluss der Kamera
Stecken Sie ein MicroSD-Karte (nicht im Lieferungumfang enthalten)
in den SnapCam LE microSD-Slot.
Stellen Sie die Zeit/Datum nach SnapCam LE Verbindung zum
Smartphone App oder PC hier. Siehe Abschnitt 7 für Smartphone-
Verbindung.
3. Modus Einstellungen
Drucken Sie den Netzschalter/ Modus Taste
LED ändert die Farbe, um aktuellen Modus anzuzeigen; begleitet
von einem Piepton.
DE-5
Modus wird in dieser Reihenfolge zu ändern: Einzel Foto>
Zeitraffer> Video/Normal:
Burst und Video/Loop können Sie mit dem Smartphone-App
SnapCam LE einstellen
4. Standbildaufnahme (Einzel)
SnapCam LE Einschalten drücken Sie den Netzschalter/ Modus
Taste
Modus nach still/Einzel
Drücke den Auslöser.
Doppelter piepton ist zu hören, wenn Foto aufgenommen wurde.
5. Videoaufnahme
Einschalten der SnapCam LE, indem Sie den Power / Modus-
Taste drücken.
Wechsel Modus auf Video / Normal, und drücken Sie dann den
Auslöser.
LED blinkt kontinuierlich während der Videoaufnahme.
Eine Single Signalton zeigt an, dass die Videoaufzeichnung
begonnen hat.
Stoppen die Videoaufzeichnung durch Drücken der Auslöser taste für
DE-6
2 Sekunden.
Ein doppelter Signalton zeigt an, dass Videoaufzeichnung
angehalten wurde.
6. Anschließen an den PC
• Stellen Sie sicher SnapCam LE ausgeschaltet ist, eine
Verbindung zum PC über USB-Kabel.
Die Kamera-Symbol "aufladen" wird angezeigt
Drücken Sie die Power / Modus-Taste, die Kamera wirkt als
USB-Speichergerät.
Die Kamera piept zweimal, wird LED orange blinken. Nachdem die
Kamera eine Verbindung zum PC hergestellt hat, blinkt die LED
grün.
7. Smartphone Anschluss
(1) Einstellen der Verbindung zum ersten Mal.
Schalten Sie die Kamera, bevor Sie zum nächsten Schritt.
Stellen Sie sicher Bluetooth basiert auf dem intelligenten Gerät.
Ö ffnen Sie die SnapCam LE App und eine Verbindung wird
hergestellt, stellen Sie sicher das Bluetooth aktiviert ist. Eine
Wi-Fi Verbindung wird dann automatisch hergestellt
Tippen Sie auf Connect Optionen um einen Bluetooth Bildschirm
zu öffnen. klicken Sie auf die Textleiste der Gerätenamens, um
DE-7
das Bluetooth-Gerät aus zu wählen. Tippen Sie auf Wake up,
um das Wi-Fi aktivieren.
Um die Kamera zu verbinden wählen Sie die Kamera Wi-Fi
SSID-Einstellung von Ihren Smartphones. Oder geben Sie
die SSID und das Passwort (0123456789) ein um, eine
automatisch gesicherte Verbindung herzustellen.
(2) Bei wiederholten verbinden der SnapCam LE App klicken
Sie auf OK für automatische Verbindung.
SnapCam LE App
8. Hinweis zur Verwendung
Wenn Wasser auf die Kamera gelangt, legen Sie die
Kamera MicroSD-Anschluss nach unten, so kein Wasser in
das Kameragehäuse gelangen.
Wenn das Aufladen der Kamera über USB nicht funktioniert,
da die Kamera über einen längeren Zeitraum nicht oder
nicht richtig verwendet wurde, laden Sie diese bitte zuerst
mit einem Netzteil auf.
DE-8
FCC Statement
Warning: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority
to operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
DE-9
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
TRADEMARK INFORMATION
© 2015 World Wide Licenses Limited.
® The iON logo is a registered trademark of World Wide Licenses Limited
Questions?
Need Some Help?
This manual should
help you understand
your new product.
If you still have
questions,
visit our website:
www.ioncamera.com
Like Us:
www.facebook.com/ioncamera
Tweet Us:
www.twitter.com/ioncamera
DE-10
Learn more.
Learn more about iON camera features at http://www.ioncamera.com
For instructions and safety information, see the iON User Guide.
Download the PDF at http://www.ioncamera.com/user-manuals/
Get support. (i.e. Warranty)
Visit https://www.ioncamera.com/support/ for all iON camera support.
If you are located in the United States of America, please contact
Customer Service at 855-411-4466. If you are located in Canada,
please contact Customer Service at 905-513-7733.
If you are located outside of the United States of America or Canada
please visit www.ioncamera.com for your local support service
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81

iON SnapCam LE Benutzerhandbuch

Typ
Benutzerhandbuch