EverFocus MobileFocus HD Plus Bedienungsanleitung

MobileFocusHD / MobileFocusHD Plus

Remote Video Surveillance for iPad

User’s Manual

Release Date: January, 2019

EVERFOCUS ELECTRONICS CORPORATION

MobileFocusHD / MobileFocusHD Plus

User’s Manual

 1995-2019 EverFocus Electronics Corp

www.everfocus.com

Disclaimer

All the images including product pictures or screen shots in this document are for example

only. The images may vary depending on the product and software version. Information

contained in this document is subject to change without notice.

Copyright

any form or by any means without written permission of the EverFocus Electronics

Corporation.

Privacy Policy

Use of your Personal Information



We collect and use the personal information from this App only within the range of purposes that

described in this App. We will not make any other uses or disclosures of the personal information to

the third parties unless otherwise giving prior notice or provided by relevant laws and regulations of

Taiwan.

When you first run the App, it will ask for authorization to access certain data or functions, such as

microphone or SD card storage. This way you can control permissions for individual Apps.



If you suspect the App of being malicious or asking for unnecessary permissions, you should choose

Deny to protect your device.



If you choose Deny in the trusted App, you may not able to use the App or access its full functionality.

In this case, please go to Settings to change the App permissions.

1.

Go to Settings.

2.

Tap Apps.

3.

Tap a desired App and then tap Permissions.

4. Choose the permissions you want to grant the App.

or by any means without written permission of the EverFocus Electronics Corporation.

Release Date: January, 2019

ii

TABLE OF CONTENTS

1. Introduction ............................................................................................................... 1

1.1 Features .............................................................................................................................. 1

1.2 MobileFocusHD and MobileFocusHD Plus .......................................................................... 2

2. iPad ........................................................................................................................... 3

2.1 Installation .......................................................................................................................... 3

2.2 User Interface Overview ..................................................................................................... 5

2.3 Operation Guide ................................................................................................................. 9

2.3.1 How to Add Device.......................................................................................... 9

2.3.2 How to Edit Device List ................................................................................. 13

2.3.3 How to Connect Device ................................................................................. 19

2.3.4 Gesture Digital Zoom .................................................................................... 23

2.3.5 PTZ Controls .................................................................................................. 24

2.3.6 Local Recording (MobileFocusHD Plus Only) ................................................ 27

2.3.7 Search and Playback (DVR / NVR Only) ........................................................ 28

2.4 Push Notification ............................................................................................................... 33

2.4.1 Read Push Notification.................................................................................. 34

2.4.2 Delete Push Notification ............................................................................... 37

2.4.3 Enable Push Notification ............................................................................... 38

2.5 Information ....................................................................................................................... 40

2.5.1 Help ............................................................................................................... 40

2.5.2 Import / Export Device .................................................................................. 41

2.5.3 Alarm Pop-up Setting .................................................................................... 45

2.5.4 Smooth Video................................................................................................ 46

MobileFocusHD / MobileFocusHD Plus

1

1. Introduction

The MobileFocusHD (Plus), designed by EverFocus, is the application for users to remotely access

to EverFocus’ DVRs, NVRs, IP Cameras and CMS (Genie XMS servers) on their iPad. The application

is compatible with current models of EverFocus’ DVRs, NVRs and IP Cameras, and can be

downloaded from the Internet.

The MobileFocusHD (Plus) applications not only feature a completely overhauled user interface

which gives a better clarity and simplicity in style, but also add or improve several functions such

as playback, local recording and device data backing up in QR Code. This brand new

MobileFocusHD (Plus) application will definitely take your remote monitoring via mobile device to

a next level.

1.1 Features

• 1 / 4 Channel Live View Display and 1 Channel Playback (MobileFocusHD)

• 1 / 4 / 9 / 16 Channel Live View Display and 1/4 Channel Playback (MobileFocusHD Plus)

• Support PTZ Control, Two-Way Audio, Gesture Digital Zoom, Snapshots, Full Screen and

OSD Hide / Show Function

• Second Stream (We highly recommend using the Second Stream for saving network

bandwidth)

• Local Device Search

• Real Time Video Streaming

• Remote Video Search by Time and Event

• Local recording (MobileFocusHD Plus)

• Support Multi-language

• Alarm Pop-up and Resize Functions

• Push Notification from Genie XMS Server

• Real Time Vehicle Video Stream from Genie XMS Server

• Support ONVIF or RTSP compliant third-party IP cameras

Chapter

1

MobileFocusHD / MobileFocusHD Plus

2

1.2 MobileFocusHD and MobileFocusHD Plus

The table below lists the supported functions of MobileFocusHD and MobileFocusHD Plus.

Application MobileFocusHD (Free) MobileFocusHD Plus

Release Version V1.1.22.5 V1.1.21.6+

Supported OS iOS 7.1.0 or later version iOS 7.1.0 or later version

Supported Devices

EverFocus DVRs, NVRs,

IP Cameras & Genie XMS servers

EverFocus DVRs, NVRs,

IP Cameras & Genie XMS servers

Supported Video Format H.264, MJPEG, MPEG4 H.264, MJPEG, MPEG4

Live View

Multi-channel Display 1 / 4 CH 1 / 4 / 9 / 16 CH

Two-way Audio Yes Yes

Snapshot Yes Yes

Digital Zoom Yes Yes

Display Time and

Camera Title

Yes Yes

PTZ Control

Focus Yes Yes

IRIS Yes Yes

Auto Pan Yes Yes

Snapshot Yes Yes

Touch to Zoom in/out Yes Yes

Preset Point Setting Yes Yes

OSD Menu Yes Yes

Playback

Time / Event Search Yes (DVR/NVR only) Yes (DVR/NVR only)

Multi-channel Display 1 CH (DVR/NVR only) 1 / 4 CH (DVR/NVR only)

Audio Yes Yes

Others

Address Book

(Device List)

Yes Yes

Help Yes Yes

IP Utility Yes Yes

Local Recording - Yes

Alarm Popup Yes Yes

Smooth Video Yes Yes

Push Notification Yes Yes

MobileFocusHD / MobileFocusHD Plus

3

2. iPad

MobileFocusHD (free version) and MobileFocusHD Plus are designed for iPad and can be

downloaded from the App Store.

2.1 Installation

1. To download the MobileFocusHD, tap the App Store.

Chapter

2

MobileFocusHD / MobileFocusHD Plus

4

2. Type “MobileFocusHD by EverFocus” or “MobileFocusHD Plus by EverFocus” in the search

field and tap the Install button.

3. After the installation process is complete, tap the or to start. When the

following page appears, you can now start to use the application.

MobileFocusHD / MobileFocusHD Plus

5

2.2 User Interface Overview

MobileFocusHD:

5

6 7

1

3

4

9

11

12

8

13

14

15

16

17

18

19

10

20

2

MobileFocusHD Plus:

5

6

7

1

43

8

9

11

12

13 14

15

16

17 21

18

19

23

22

10

20

MobileFocusHD / MobileFocusHD Plus

6

Push Notification:

24

25

26 27

28

MobileFocusHD / MobileFocusHD Plus

7

No. Name Function Description

1 Edit

Tap to edit the devices list. Please refer to 2.3.2 How to Edit

Device List.

2 Search Bar

In the Device List / Genie XMS Server List / Push Notification

List, swipe down from the top to display the search bar.

3 Device List

Shows the added devices. Tap a device to connect its video

stream on to the selected screen.

The Unclassified [*] indicates the number of devices which

haven’t been added to a group.

Please refer to 2.3.3 How to Connect Device.

4 Add Device

Tap to add new device or a new group. Please refer to 2.3.1

How to Add Device.

5 Settings Tap to configure the device settings.

6 Live View Screen

Tap to select a desired channel. Selected channel will be

highlighted with an orange frame. Tap and hold on a channel to

show the channel in one division screen display.

7 Close Stream Tap to close the camera stream.

8 DVR / NVR Device Tap to show DVR / NVR / Genie XMS server device list.

9 IP Camera Device Tap to show IP camera device list.

10 Push Notification Tap to show Push Notification List.

11 Information

Tap to show user guide and release note, tap to import and

export device or tap to configure alarm pop-up window setting.

Please refer to

2.4 Information.

12 Disconnect Tap to close all the camera streams.

13 Audio Volume Tap and move the slide bar to adjust the audio volume.

14 PTZ Control

Tap to bring up the PTZ control panel. Please refer to 2.3.5 PTZ

Control.

15 Snapshot

Tap to take a snapshot; you can select to take a snapshot of all

channels or single channel. The snapshot files will be saved at

your Photos folder in iPad.

16 Microphone Tap to enable or disable audio input device.

17 Audio Tap to enable or disable audio function.

18 Single Division Tap to display the channel in single division screen.

19 Quad Division Tap to change to quad division screen display.

20 Full Screen Tap to display live view in full screen.

21 Local Recording

Tap to record the video to the local mobile device (only record

one channel at a time). The recording files will be saved at your

Photos folder in your iPad. Please refer to 2.3.6 Local Recording.

(Plus version only).

MobileFocusHD / MobileFocusHD Plus

8

22 9-Division Tap to change to 9-division screen display. (Plus version only)

23 16-Division Tap to change to 16-division screen display. (Plus version only)

24 Genie XMS Server List

Shows the sources of the notifications. Tap to bring up the

corresponding Push Notification list.

25 Back Tap to return to the Genie XMS Server List.

26 Push Notification List

Shows the received push notifications on the list. The Event List

[*/*] indicates the number of unread / total notifications.

27 Delete Tap to delete all received push notifications.

28 General / xFleet Tab

Tap General to show the General notifications or tap xFleet to

show the xFleet notifications.

MobileFocusHD / MobileFocusHD Plus

9

2.3 Operation Guide

2.3.1 How to Add Device

You can add EverFocus’ DVRs/NVRs or IP cameras in the respective device lists, and you can

add the devices manually or automatically by Local Search.

To add IP devices manually:

1. Tap or icon to show the DVR / NVR or IP camera Device List.

2. Tap the button, and then tap Add Device when the below window appears.

MobileFocusHD / MobileFocusHD Plus

10

3. Then, the device setting page will pop up as below:

4. Tap the Model option to bring up the model list and scroll to select a model. For Genie

XMS Servers, please select XMS/Commander2/Elite2.

5. Enter the Name, IP/URL, Port, User account and Password of the device. Keep the

Second Stream on. We highly recommend using the Second Stream for saving network

bandwidth.

To add IP devices automatically by Local Search:

1. Follow the above 1 and 2 steps and tap Local Search. This page appears.

MobileFocusHD / MobileFocusHD Plus

11

2. Tap a device to add that device.

3. Enter the User account and Password of the selected device.

The default user account and password are as follows:

DVR / NVR: The default user account is admin and the default password is 11111111.

IP Camera: The default user account is user1 and the default password is 11111111.

4. Keep the Second Stream on. We highly recommend using the Second Stream for saving

network bandwidth.

5. Tap Save to save the added device.

For the Second Stream function to work, the Sub-Stream function of the IP devices has to be

enabled in advance. Please refer to the User’s Manual of your IP devices.

Device Model Sub-Stream (must be enabled)

Video Codec (optional)

DVR / NVR All DVRs / NVRs Auto-enabled *

Selectable

(H.264 / MJPEG)

IP Camera

All IP cameras

Configurable (Stream2)**

* EverFocus DVRs and NVRs support dual streams, and the sub-stream function has been

automatically enabled with a fixed resolution of 360 x 240; but for certain models, users are

able to configure the settings (resolution, frame rate…) of sub-stream.

** EverFocus IP cameras support triple streams, please enable the Stream 2 because the

MobileFocus will only source the Stream 2 for mobile live viewing.

MobileFocusHD / MobileFocusHD Plus

12

To add Vehicles:

You have to configure the Vehicle settings on the Genie XMS server first, and then add this

Genie XMS server to the MobileFocusHD (Plus).

Genie XMS Server

MobileFocusHD (Plus)

Vehicle

Mobile DVRs

Note: To connect the Vehicle through MobileFocusHD (Plus), your Mobile DVR in the Vehicle

need to equipped with 3G/4G module.

1. On the Maintain page of the Genie XMS server (Device Detail > Add), add a Vehicle to

the Xfleet Group. Please refer to the Genie XMS User’s Manual for more details.

2. Add this Genie XMS Server to the MobileFocusHD (Plus) DVR / NVR Device List.

MobileFocusHD / MobileFocusHD Plus

13

2.3.2 How to Edit Device List

You can edit or delete devices in the Device List, create a group or change the order of the

devices on the Device List page.

To delete a device:

1. Tap the Edit button on the Device List.

2. Tap the red circle first and tap the Delete button.

MobileFocusHD / MobileFocusHD Plus

14

To view or change settings of a device:

1. Tap the icon to bring up the editing page.

2. Tap each field to change the setting, and tap Save to save the changes and return to the

Device List page.

MobileFocusHD / MobileFocusHD Plus

15

To create a group:

1. Tap the Add button, and then tap Add Group.

2. You can search the device in the search field and tap the devices which you want to

group, and then tap Save.

MobileFocusHD / MobileFocusHD Plus

16

3. Enter a group name, and tap OK. Then, the device group is successfully created in the

Device List.

4. The group will be added on the top of the Device List, and you can still tap the icon

to add or delete the devices in the group. The number icon indicates the number of

devices in this group.

MobileFocusHD / MobileFocusHD Plus

17

To delete a group:

1. Tap the Edit button on the Device List.

2. Tap the icon to delete the group. And tap Done to save the changes and return to

the Device List page.

Seite wird geladen ...

EverFocus MobileFocus HD Plus Bedienungsanleitung

EverFocus MobileFocus HD Plus Bedienungsanleitung

in anderen Sprachen

Verwandte Artikel

Andere Dokumente