ZyXEL NWD-310N Bedienungsanleitung

NWD310N

Wireless N PCI Adapter

Quick Start Guide

Version 1.00

10/2007

Edition 1

CONTENTS

ENGLISH 2

DEUTSCH 20

ESPAÑOL 38

FRANÇAIS 56

ITALIANO 74

PУССКИЙ 92

SVENSKA 110

ENGLISH

2

Overview

The NWD310N is a wireless network adapter for your desktop

computer. The NWD310N is WPS (Wi-Fi Protected Setup)

compatible.

1 Install the Software

" Install the software from the CD before you

insert the NWD310N. Do not insert the

NWD310N yet.

1 Remove the NWD310N if you already inserted it.

2 Insert the included CD into the CD-ROM drive on your

computer.

ENGLISH

3

ENGLISH

3 When the following screen displays, click Setup to install

the ZyXEL utility and driver.

V If the screen does not display, locate and

double-click autorun.exe on the CD.

ENGLISH

4

4 When the following screen displays, click Next.

5 Select Driver and Utility to install both the ZyXEL utility

and the driver on your computer. You can still use your

5

ENGLISH

operating system’s wireless network utility, if you choose

not to install the ZyXEL utility.

6 Click Install.

ENGLISH

6

" You will need to shut down your computer after

installing the ZyXEL utility. Make sure you have

saved your work before continuing.

7 When the following screen displays, select No, I will

restart my computer later. You will turn your computer off

when you install the hardware.

Click Finish to complete the software installation.

7

ENGLISH

2 Install the Hardware

" Do not install the hardware until you have

installed the software from the CD.

1 Save your work and close all applications.

2 Turn off the computer and any peripheral device(s), such

as a printer.

3 Unplug the computer from the power source.

" Ground yourself by wearing an anti-static wrist

strap if you have one or touching a grounded

metal object.

4 Remove the computer cover, and then remove the

NWD310N from its packaging.

5 If the antennas are attached to the NWD310N, remove

(unscrew) them.

ENGLISH

8

6 Insert the NWD310N into an available PCI slot. Make sure

the NWD310N's contacts are fully seated in the PCI slot

(A).

7 Secure the NWD310N to the computer with a bracket

screw and replace the computer cover.

8 Attach (screw) the antennas onto the NWD310N.

9 Point the antennas up.

10 Connect the power and turn on your computer.

A

9

ENGLISH

The NWD310N’s Link LED (light) turns on if it is properly

inserted.

V If the NWD310N’s Link LED is not on after you

have installed the software and the NWD310N,

make sure the NWD310N is properly inserted.

11A Found New Hardware Wizard window displays. Select

Install the software automatically (recommended) and

click Next and then click Finish.

ENGLISH

10

3 Connect to a Wireless Network

Using WPS

You can use Wi-Fi Protected Setup (WPS) to add your

desktop computer to a wireless network.

" Go to Section 4 if you want to use the utility to

join a wireless network.

The NWD310N supports two WPS methods for creating a

secure connection:

• Push Button Configuration - create a secure wireless net-

work simply by pressing a button. See section 3.1.

• PIN Configuration - create a secure wireless network by

entering the NWD310N’s PIN (Personal Identification Num-

ber) into the configuration screen of an Access Point (AP).

See section 4.2.

3.1 Push Button Configuration

1 Make sure that your wireless AP (Access Point) is turned

on and that it is within range of your desktop computer.

2 Press the WPS button on the NWD310N and on your

wireless AP (ZyXEL’s NWA570N is shown as an

example). It doesn’t matter which button is pressed first.

11

ENGLISH

You must press the second button within two minutes of

pressing the first one.

" Your NWD310N has a WPS button located on its

panel, as well as a WPS button in its configuration

utility. Other WPS enabled devices have a similar

WPS button.

3 The AP and the NWD310N establish a secure connection.

This can take up to two minutes.

4 You are now ready to connect to the Internet wirelessly

through your NWD310N.

WPS

Internet

AP

NWD310N

ENGLISH

12

4 Connect to a Wireless Network via

the ZyXEL Utility

This section shows you how to use the WPS PIN method to

connect to an AP as well as how to configure wireless

settings manually to join a wireless network.

4.1 Open the Utility

1 After you install the

ZyXEL utility and

insert the NWD310N,

an icon appears in the

system tray. Double-

click the icon.

2 The ZyXEL utility Link

Info screen displays.

13

ENGLISH

V If the icon does not display, uninstall and re-

install the ZyXEL utility. See the User’s Guide

for how to uninstall the utility.

The NWD310N automatically connects to an available

wireless network without security enabled. However, this

wireless network may not be connected to the Internet.

If the icon is green you are already connected to a

wireless network.

If the icon is red, you are not connected to a wireless

network.

4.2 WPS PIN Configuration

1 Click the Adapter tab.

ENGLISH

14

2 The ZyXEL utility Adapter screen displays. In the WPS

section, select WPS and PIN - Use this device’s PIN.

Write down the 8-digit PIN that is displayed in the grayed-

out text field of the pop-up window. You will need to enter

this PIN in the WPS screen of the AP.

• The PBC (Push Button Configuration) option works

the same way as the physical WPS button (see section

3.1 if you want to use this instead).

• The PIN - Use the PIN from the AP or Wireless

Router option is used when you want to register the

AP’s or wireless router’s PIN with the NWD310N (see

the User’s Guide if you want to use this instead).

3 Launch your AP’s configuration utility, go to the screen

where you can configure the WPS settings and enter the

15

ENGLISH

NWD310N’s PIN (an example screen from ZyXEL’s

NWA570N is shown).

4 Click Start in the NWD310N Adapter screen and Apply or

Start in the AP’s WPS screen within two minutes.

The AP authenticates the NWD310N and sends the proper

configuration settings to the NWD310N. This may take up to

two minutes. The NWD310N is now able to communicate with

the AP securely.

4.3 Connecting to a Wireless Network

1 Double-click the

icon. The ZyXEL utility

Link Info screen

displays. Click the Site

Survey tab.

ENGLISH

16

2 The available wireless

networks display in the

Available Network List.

SSID means Service Set

Identifier and is the name

of the wireless network.

3 If a wireless network has no

security, one of the following icons appears

next to its entry in the list.

If a wireless network has security, one of the

following icons appears next to its entry in

the list.

Choose the network you want to connect to by clicking on it

and clicking Connect.

4 If a network has no security, the Link Info screen displays.

Go to step 6.

5 If a network has security, the security settings screen

appears. You need to enter security information to connect

to the network. Get this information from the network

administrator. Be sure to enter the information exactly as it

was given to you.

17

ENGLISH

6 To access the Internet, open your Internet browser and

enter the URL of a web site in the address bar. The AP

should be connected to the Internet.

If the web site displays correctly, you are successfully

connected to the Internet.

Note for Windows XP Users

If you want to use Windows Zero Configuration (WZC), right-

click the icon and select Use Windows Zero

Configuration as Configuration utility.

To activate the ZyXEL utility again, right-click the icon and

select Use ZyXEL Utility as Configuration utility.

If you want to use WZC only, uncheck Utility during the

ZyXEL utility installation.

ENGLISH

18

Procedure to View a Product’s Certification(s)

1 Go to www.zyxel.com.

2 Select your product from the drop-down list box on

the ZyXEL home page to go to that product's page.

3 Select the certification you wish to view from this

19

ENGLISH

DEUTSCH

20

Übersicht

Der NWD310N ist ein WPS-kompatibler

Drahtlosnetzwerkadapter für Ihren Desktop-Computer (WPS

= "Wi-Fi Protected Setup"; Wi-Fi-geschützte Installation).

1 Installation der Software

" Installieren Sie die Software von der CD,

bevor Sie die NWD310N einstecken.

1 Entfernen Sie die NWD310N wieder, falls Sie sie bereits

eingesteckt haben.

2 Legen Sie die mitgelieferte CD in das CD-ROM-Laufwerk

des Computers ein. Bei entsprechender Einstellung Ihres

Betriebssystems startet das Setup Programm

automatisch.

D

EUTSC

H

Seite wird geladen ...

ZyXEL NWD-310N Bedienungsanleitung

Dieses Handbuch eignet sich auch für

ZyXEL NWD-310N Bedienungsanleitung

in anderen Sprachen

Verwandte Artikel