Silvercrest SRW 2 A1 Operating Instructions Manual

Marke: Silvercrest

Modell: SRW 2 A1

Typ: Operating Instructions Manual

RADIO ALARM CLOCK SRW 2 A1

RADIO ALARM CLOCK

Operating instructions

IAN 106864

RADIOWECKER

Bedienungsanleitung

GB / IE / CY Operating instructions Page 1

DE / AT / CH Bedienungsanleitung Seite 25

Before reading, unfold the page containing the illustrations and familiarise

yourself with all functions of the device.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen

Sie sich anschließend mit allen Funktionen des Gerätes vertraut.

SRW 2 A1

Contents

Introduction ...................................3

Information concerning these operating instructions ............3

Intended use ...........................................3

Safety ........................................5

Risk of electrocution .....................................5

Handling batteries ......................................6

Basic safety guidelines ...................................7

Components ...................................9

Initial operation ...............................10

Check the package contents .............................10

Disposal of packaging materials ..........................10

Set-up location requirements .............................11

Inserting batteries ......................................11

Connecting the power supply .............................12

FM wire aerial ........................................12

Handling and operation ........................12

Setting the time ........................................12

Switching radio mode on/oﬀ .............................14

Adjusting the volume ...................................14

Adjusting stations manually ..............................14

Searching for the next station .............................15

Saving stations manually ................................16

Automatic station search (AMS function) ....................16

Retrieving saved radio stations ............................16

SRW 2 A1

Programming alarm times and alarm type ...................17

Activating the alarm function .............................17

Switching oﬀ the alarm ..................................18

Switching oﬀ the alarm function ...........................18

Snooze function .......................................18

Automatic switch-oﬀ (sleep function) .......................18

Adjusting display illumination .............................19

Switching the night light on/oﬀ ...........................19

Troubleshooting ..............................19

Fault causes and rectiﬁcation .............................19

Cleaning .....................................21

Storage .....................................21

Disposal .....................................21

Disposal of the device ..................................21

Disposing of the batteries ................................22

Appendix ....................................22

Technical data ........................................22

Notes on the Declaration of Conformity ....................23

Warranty ............................................23

Service ..............................................24

Importer .............................................24

SRW 2 A1

Introduction

Information concerning these operating

instructions

These operating instructions are a component part of the radio alarm

SRW 2 A1 (hereinafter referred to as the device) and provides

important information on the intended use, safety, the connection and

operation of the device. The operating instructions must be kept near

to the device at all times. These must be read and applied by

everyone assigned to operate, and eliminate faults in, the device.

Keep these operating instructions in a safe place and pass them on to

any future owner together with the device.

This documentation is protected by copyright.

Any copying or reproduction, including in the form of extracts, or any

reproduction of images (even in a modiﬁed state), is permitted only

with the written authorisation of the manufacturer.

Intended use

This device is a domestic consumer electronics device designed for

listening to radio programmes and as an alarm using an alarm tone

or radio signal. It is not intended for any other use or use beyond that

speciﬁed. Claims of any kind for damage resulting from misuse, in-

competent repairs, unauthorised modiﬁcation or the use of unauthor-

ised spare parts will not be accepted. The risk shall be borne solely

by the user.

SRW 2 A1

The following warning notes are used in these operating instructions:

DANGER

A warning note at this hazard level indicates an im-

minently hazardous situation.

If the hazardous situation is not avoided, it could result in death or

serious physical injury.

► Follow the instructions in this warning note to prevent a fatality

or serious personal injury.

WARNING

A warning note at this hazard level indicates a poten-

tially hazardous situation.

Failure to avoid this hazardous situation could result in physical

injury.

► Follow the instructions in this warning note to prevent physical

injury.

CAUTION

A warning note at this hazard level indicates potential

property damage.

Failure to avoid this situation could result in property damage.

► Follow the instructions in this warning note to prevent property

damage.

NOTE

► A note provides additional information that will assist you in

using the device.

SRW 2 A1

Safety

In this section, you will ﬁnd important safety instructions for using the

device. The device complies with the statutory safety regulations.

Improper use may result in personal injury and property damage.

Risk of electrocution

DANGER

Risk of fatal injury from electrocution!

Contact with live cables or components can result in

fatal injury!

Comply with the following safety information in order to avoid the

risk of electric shock:

► Do not use the device if the mains power plug or the connection

cable are damaged.

► The device housing must not be opened under any circumstanc-

es. There is a risk of electric shock or ﬁre if live connections are

touched and the electrical and mechanical structure is changed.

► Never touch the mains plug or the device with wet hands.

► When disconnecting the device from the mains supply, always

pull on the plug and never on the cable.

► The device consumes power in standby mode. To completely

disconnect the device from mains power, the power plug must

be removed from the mains power socket. The device should

be positioned so that you have unrestricted access to the mains

power socket at all times, and can pull out the plug immediately

in an emergency.

SRW 2 A1

Handling batteries

DANGER

Mishandling the batteries can cause ﬁres, explosions,

leakages or other hazards!

► Do not throw the batteries into a ﬁre and do not subject them to

high temperatures.

► Do not open, deform or short-circuit batteries, since this can

lead to chemical leakage.

► Do not attempt to recharge batteries. Do not charge batteries

unless they are explicitly labelled as "rechargeable". There is

a risk of explosion!

► Check the condition of the batteries at regular intervals. Leaking

chemicals can cause permanent damage to the device. Take

particular care when handling damaged or leaking batteries.

Risk of acid burns! Wear protective gloves.

► Chemicals which leak from a battery can cause skin irritation.

In the event of contact with the skin, rinse with copious amounts

of water. If the chemicals come into contact with your eyes,

rinse thoroughly with water, do not rub and consult a doctor

immediately.

► Keep batteries out of the reach of children. Children might put

batteries into their mouth and swallow them. If a battery has

been swallowed, seek medical assistance IMMEDIATELY.

► Do not mix diﬀerent types of batteries.

► Always insert the batteries the right way round (observe correct

polarity) otherwise there is a danger that they could explode.

► If you do not intend to use the device for a long time, remove

the batteries.

SRW 2 A1

Basic safety guidelines

To ensure safe operation of the device, follow the safety guidelines

set out below:

■ This device may be used by children aged 8 years and above

and by persons with limited physical, sensory or mental capabili-

ties or lack of experience and knowledge, provided that they are

under supervision or have been told how to use the device safely

and are aware of the potential risks. Children must not use the

device as a plaything. Cleaning and user maintenance tasks

may not be carried out by children unless they are supervised.

■ Prior to use, check the device for visible external damage.

Do not operate a device that has been damaged or dropped.

■ Ensure that the connecting cable of the device is not damaged

and that it is not laid over hot surfaces and/or sharp edges.

■ Ensure that the power cable is not stretched tightly or kinked.

■ Do not allow the connection cable to hang over edges

(Trip wire eﬀect).

■ If the cables or connections are damaged, have them replaced

by an authorised specialist or the Customer Service department.

■ All repairs must be carried out by authorised specialist companies

or by the Customer Service department. Failure to make proper

repairs can put the user at risk. It will also invalidate any warranty

claim.

■ Defective components must always be replaced with original

replacement parts. Compliance with the safety requirements can

only be guaranteed by using these replacement parts.

■ Do not make any unauthorised modiﬁcations or alterations to the

device.

■ Never attempt to open the device.

SRW 2 A1

■ Always place the device on a stable and level surface. It can be

damaged if dropped.

■ Do not expose the device to direct sunlight or high temperatures.

Otherwise it may overheat and be irreparably damaged.

■ Do not place the product near heat sources such as radiators or

other heat-generating devices.

■ Do not operate the device close to naked ﬂames (e.g. candles).

■ Place the device so that the ventilation slots are not covered.

■ The device is not designed for use in rooms with high temperatures

or humidity (e.g. bathrooms) or where there is excessive dust.

■ Protect the device from drips or splashes of water. Never immerse

the device in water and do not set up the device in the close

vicinity of water and do not place objects ﬁlled with liquids (e.g.

vases) onto the device.

■ If you notice a burning smell or smoke, pull out the plug immedi-

ately and remove the batteries.

■ Always disconnect the power cable from the mains power socket

by the plug, not by the cable itself.

■ In the case of a malfunction occurring or a thunderstorm, discon-

nect the plug from the mains power socket.

■ Packaging materials (such as plastic ﬁlm or polystyrene) must not

be used as playthings.

Risk of suﬀocation!

SRW 2 A1

Components

(see fold-out page)

Display

Power cable

Wire aerial

Night light

Battery compartment

Loudspeaker

/FM/AM button: Switch the radio on/oﬀ / select frequency

band

TIME button: Set the time

SLEEP button: Set the automatic switch-oﬀ

M+/AMS button: Set station memory position / start automatic

station saving

HR/− button: Set hours (time) / decrease volume

MIN/+ button: Set minutes (time) / increase volume

SNOOZE/LIGHT/DIM button: Pause alarm / switch night light

on/oﬀ / set display light

AL2/UP button: Set alarm 2 / settings up

AL1/DOWN button: Set alarm 1 / settings down

Operating instructions

SRW 2 A1

Initial operation

Check the package contents

The following components are included in delivery:

▯ Radio alarm

▯ These operating instructions

♦ Take the device and the operating instructions out of the box and

remove all packing material.

NOTE

► Check the package for completeness and for signs of visible

damage.

► If the consignment is incomplete or damaged due to defective

packaging or carriage, contact the Service hotline (see the

section Service).

Disposal of packaging materials

The packaging protects the device from damage during carriage.

The packaging materials have been selected for their environmental

friendliness and ease of disposal, and are therefore recyclable.

Returning the packaging to the material cycle conserves

raw materials and reduces the amount of waste that is

generated. Dispose of packaging materials that are no

longer needed in accordance with applicable local

regulations.

SRW 2 A1

Set-up location requirements

For safe and trouble-free operation of the device, the set-up location

must fulﬁl the following requirements:

■ The surfaces of furniture may possibly contain components that

could aﬀect the device’s rubber pads and soften them.

If necessary place a cover under the device’s pads.

■ The mains power socket must be easily accessible so that the

power cable can be easily disconnected in an emergency.

Inserting batteries

By inserting two 1.5 V batteries (type R6/LR6/AA/Mignon) you

avoid losing the programmed time of day and alarm time in the

event of mains power loss. The batteries make sure that the internal

clock continues to run even during a power outage. The display

will then automatically show the correct time when mains power is

restored.

NOTE

► The display, radio, alarm clock and night light do not function in

emergency mode.

♦ Open the cover of the battery compartment

on the bottom of

the device.

♦ Insert two 1.5 V R6/LR6/AA/Mignon batteries (not supplied)

into the battery compartment

. Insert the batteries as shown

on the polarity diagram in the battery compartment

♦ Close the battery compartment

by replacing the cover and

clicking it into place.

SRW 2 A1

Connecting the power supply

CAUTION

► Before connecting the device, compare the connection data

(voltage and frequency) on the rating plate with that of your

mains power supply. These data must agree so that no damage

is sustained by the device.

♦ Insert the power plug into a mains wall socket. The time display

(0:00) ﬂashes on the display

FM wire aerial

♦ Completely unwind the wire aerial

for FM radio reception.

Handling and operation

This section provides you with important information on handling and

using the device.

Setting the time

NOTE

► Make the settings quickly. If you do not press a button for 5 sec-

onds, the entry is cancelled. All settings made up to this point

are saved automatically.

♦ Press the TIME button

for about 2 seconds. The display

ﬂashes, showing the indicator for 24-hour mode ( ).

♦ Press the MIN/+ button

or HR/− button

to change between

24-hour mode ( ) and 12-hour mode ( ).

SRW 2 A1

NOTE

► If the 12-hour mode is set, a point appears in the upper right of

the display

from midday onwards (PM).

♦ Press the TIME button

again to accept the settings.

♦ Press the TIME button

again. The time ﬂashes on the display.

♦ Press or hold the HR/− button

to set the hours.

♦ Press or hold the MIN/+ button

to set the minutes.

♦ Press the TIME button

again. The programmed time will be

set.

NOTE

► The time is reset to 0:00 if the device is disconnected from the

power supply and no batteries are installed.

SRW 2 A1

Switching radio mode on/oﬀ

NOTE

► The technical properties of the device permit an adjustable

frequency range outside the permitted frequency ranges of VHF

(FM) 87.5–108 MHz and/or MW (AM) 526.5–1606.5 kHz.

In some countries, diﬀerent national regulations may apply to

the assigned radio frequency ranges. Please note that informa-

tion received outside of the assigned radio frequency ranges

may not be exploited, passed on to third parties or otherwise

misused.

♦ Press the

/FM/AM button

to switch the device on.

♦ Press the /FM/AM button

for about 2 seconds to switch the

device oﬀ.

Adjusting the volume

♦ Use the MIN/+ button

or HR/− button

to set the desired

volume.

Adjusting stations manually

♦ Press the /FM/AM button

brieﬂy to select the required fre-

quency band. In the case of FM reception, a point (FM) appears

on the left of the display ; for AM reception, a point (AM)

appears on the left of the display .

♦ Press the AL2/UP button

brieﬂy to increase the frequency.

♦ Press the AL1/DOWN button

brieﬂy to decrease the frequency.

SRW 2 A1

NOTE

► In FM reception, the frequency is set in 0.05 MHz increments.

At a frequency with 0.05 MHz (e.g. 99.25 MHz) a point

appears on the right of the display (0.05).

The station frequency is shown on the display

and the speaker

is switched oﬀ during the station search.

Searching for the next station

The device can automatically search for the nearest station.

♦ Press the AL2/UP button

for about 2 seconds. The device

searches for the station with the next higher frequency.

♦ Press the AL1/DOWN button

for about 2 seconds. The

device searches for the station with the next lower frequency.

NOTE

► The automatic station search to the next station can only be

started if a frequency is shown in the display. If the device

switches to time display, you must press the AL2/UP button

or AL1/DOWN button

to switch back to the frequency dis-

play. After this, the automatic station search can be continued.

SRW 2 A1

Saving stations manually

The device has 20 preset slots. There are 10 preset slots available for

each frequency band (FM and AM).

♦ Set the desired station as described above.

♦ Press the TIME button

. The number of the preset slot, e.g.

P01 ﬂashes on the display

♦ Press the MIN/+ button

or HR/− button

to store the

desired preset slot.

♦ Press the TIME button

again to store the setting.

Automatic station search (AMS function)

The device uses the AMS function to automatically search for stations

and saves them in the 10 preset slots of the respective frequency

band.

NOTE

► If you execute the following described AMS function, all the

previously saved stations will be lost.

♦ Press the M+/AMS button

for about 2 seconds. The device

starts the station search and ﬁlls the preset slots P01 to P10 with the

stations that are found. Every time a station is saved, the preset

number ﬂashes brieﬂy on the display. Once all of the preset slots

have been ﬁlled, the scan is stopped.

Retrieving saved radio stations

♦ Press the M+/AMS button

repeatedly to call up the preset

slots P01 to P10.

SRW 2 A1

Programming alarm times and alarm type

When programming the alarm times, you can select whether an

alarm tone should sound at the programmed time or whether the

radio should start playing. Two diﬀerent alarm times (Alarm 1/Alarm 2)

can be programmed. Radio mode must be deactivated.

♦ Press the AL1/DOWN button

or AL2/UP button

. The time

ﬂashes on the display and a point appears on the lower left

or right next to the alarm type “Alarm” (

♦ Press or hold the HR/− button

to set the hours.

♦ Press or hold the MIN/+ button

to set the minutes.

♦ If you wish to set the alarm type “Radio” (

), press the AL1/

DOWN button

or AL2/UP button

again. A point appears

on the lower left or right of the display next to the alarm type

“Radio” (

♦ Wait until the time display and the dot next to the alarm type stop

ﬂashing to accept the setting.

NOTE

► If you want to be woken by the radio, you will also need to

select the desired station and volume as well as the alarm time.

Activating the alarm function

♦ Press the AL1/DOWN button

or AL2/UP button

brieﬂy. In

the display a point appears to the lower left and/or right. The

alarm function is now activated.

Seite laden ...

Silvercrest SRW 2 A1 Operating Instructions Manual

Marke: Silvercrest

Modell: SRW 2 A1

Typ: Operating Instructions Manual

PDF Herunterladen

Bericht

in anderen Sprachen

English: Silvercrest SRW 2 A1

Silvercrest SRW 2 A1 Operating Instructions Manual

Silvercrest SRW 2 A1 Operating Instructions Manual

in anderen Sprachen

Verwandte Papiere

Sonstige Unterlagen