Classic Phono TT-34 Benutzerhandbuch

User’s Manual

TT-34

Wooden turntable with USB

connection

The lightning flash with

arrowhead symbol, within

an equilateral triangle is

intended to alert the user to

the presence of uninsulated

‘dangerous voltage’ within

the product’s enclosure that

may be of sufficient

magnitude to con stitute a

risk of electric shock to

persons.

CAUTION

RISK OF EXECTRIC

SHOCK

DO NOT OPEN

WARNING: TO REDUCE

THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE

COVER (OR BACK), NO

USER SERVICE ABLE

PARTS INSIDE REFER

SERVICEING TO

QUALIFIED SERVICE

PERSONNEL

The exclamation point

within an equilateral triangle

is intended to alert the user

to the pres en ce of important

operating and maintenance

(servicing) instructions in

the literature accompanying

the appliance

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions

2) Keep these instructions

3) Heed all warnings

4) Follow all instructions

5) Do not use this apparatus near water

6) Clean only with dry cloth

7) Do not block any ventilation open ings. Install in accordance with the manuf acture.

8) Do not install near any hot sources such as radiations, heat registers, stoves, or

other.

9) Only use attachments/accessories specified by the manufacturer.

10) Unplug this apparatus during lightning storm s or whe n un us ed for long periods of

time.

11) Refer all servicin g to qualified servic e personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normal ly, or has

been dropped.

12) This appliance shall not be exposed to dripping or splashing water and no object filled

with liquid such as vases shall be placed on the apparatus.

13) Do not overload wall outlet. Use only power source as indicated.

14) Use replacement parts as spec ified by the manufacturer.

15) The product may be mounted to a wall only if recommended by the manufacturer.

16) Upon completion of any service or repairs to this product, ask the service technician

to perform safety checks.

PREPARATION FOR USE

UNPACKING AND SET UP

• Carefully remove the unit from the display carton and remove all packing material

from the unit.

• Unwind the AC power plug and extend it to its full leng th.

• Place the unit on a stable, level surface, convenient to an AC outlet, out of direct

sunlight, and away from source of excess heat, dust, moisture, humidity or strong

magnetic field.

• Connect the plug to your AC outlet.

• Raise the lid to expose the phonograph. The phono graph has been secured for

shipment with a transit screw.

• Use a coin or screwdriver to turn the transit screw clockwise. This will allow the

turntable to “float”.

TRANSIT SCREW

• Remove the opaque while plastic stylus cover from the phonograph stylus by sliding it

in the di rection of the arrow.

Discard the stylus cover.

• Remove the twist-tie that was used to secure the tone arm during shipment.

• Release the tone arm lock lever.

• Connect the plug to your AC outlet.

EN EN

TONE ARM LOCK LEVER TONE ARM LOCK LEVER

STYLUS COVER STYLUS COVER

POWER SOURCE

• This system uses an AC adaptor.

• You should have your outlet c hanged by a qual ified licensed el ectrician.

• In order to make operation run correctly, the power plug and power jack should be a

suitable match.

IMPORTANT: Raising and Lowering the Lid

To open the lid, raise it as far as it will go until the lid support bracket “locks” in the open

position.

To close the lid, lift it upward slightly until the lid support bracket “unlocks”, and then gently

lower the lid.

TO AVOID DAMAGING THE CABINET OR THE LID, NEVER FORCE THE LID

PROTECT YOUR FURNITURE

This model is equipped with non-skid rubber “feet” to prevent the product from moving

when you operate the controls. These “feet” are made from non-migrating rubber material

specially formulated to avoid leaving any marks or stains on your f urnitu re. However

certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may

cause the rubber “feet” to soften, and leave marks or a rubber residue on the furniture. To

prevent any damage to your furniture we strongly recommend that you purchase small

self-adhesive felt pads, available at hardware stores and home improvement centers and

apply these pads to the bottom of the rubber “feet” before you place the product on fine

wooden furniture.

LOCATION OF CONTORLS AND INDICATORS

FORNT PANEL

1) PHONOGRAPH LID

2) PHONOGRAPH LID SUPPORT BRACKET

3) 45RPM ADAPTOR

4) VOLUME CONTROL

5) SPEAKERS

BACK PANEL

6) POWER ON/OFF BU TTON

7) AC POWER CORD

8) USB SOCKET

1

5

4

3

2

8

7

6

PHONOGRAPH

1) Turntable

2) 45RMP Adaptor

3) Transit Screw

4) Cue Lever

5) Speed Selector (33 & 45 & 78RPM)

6) Tone Arm Lock

7) Tone Arm with Stylus

PLAYING RECORDS

This system includes a full-size, 3-speed, belt-drive turntable. You can play 33, 45, and

78RPM records.

1) Press the POWER button to turn on the unit.

2) Make sure that you have removed the stylus cover from the stylus and have released

the Tone Arm Lock that secured the tone arm to the tone arm rest.

3) Set the turntable Speed Selector to the appropriate speed, 33, 45, or 78RPM. If you

are playing 45RPM singles, place the 45RPM adapter on the center spindle .

4) Place your record on the center spindle.

5) Raise the CUE lever to lift the tone arm off its rest. Move the tone arm to the edge of

the record. The turntable starts automatically. Use the CUE lever to gently lo wer the

tone arm onto the record.

6) When the tone arm reaches the end of the record it automatically returns to the tone

arm rest and the record player stops.

7) To turn the system “Off”, press and hold the POWER button 2 seconds.

NOTE: Do not turn or s top the turntable manually, Moving or jarring the Turntable without

securing the Tone Arm c lamp could result in damage to the Tone Arm.

IMPORTANT

• TO PROTECT THE TURNTABLE FROM DAMAGE DURING TRANSPORTATION, A

SILVER TRANSIT SCREW IS LOCATED AT THE UPPER R IGH T OF THE

TURNTABLE PLATFORM.

• BEFORE PLAYING, PLEASE USE A SCREWDRIVER TO TURN THE TRANSIT

SCREW IN CLOCKWISE DIRECTION (SCREW GOING DOWN) COMPLETELY TO

UNLOCK THE TURNTABLE

• TO LOCK THE TURNTABLE AGAIN FOR TRANSPOTATION, PLEASE TURN THE

SCREW IN COUNT ER -C LOCKWISE DIRECTION.

Audacity and USB Connection

It supports Windows95 or more advanced version, with the EMS memory more than 128M

and Audacity takes space of 5MB.

Installing the Audacity Software

• To install the Audacity software on your computer:

• Insert the Audacity disc into the CD drive of your computer.

• Click on My Compu ter on the desktop.

• Dblclick CD drive to view the c onten ts of the Audacity disc.

• Dblclick Audacity Set Up to install the Audacity software according to the instruction.

Install the USB Drive

• Make sure the Audacity disc is still in your CD drive.

• Use the included USB cable to connect the turntable to your c omputer.

• Follow screen instruction to install the USB driver.

Running the software

1. Double click the Audacity software showing red and orange sou nd waves streaming

out the blue headphone, an d the following interface will appear.

*Note: Please review the software licensing and distribution restrictions found on the

software disc. Use of the Audacity software is subject to thos e conditions and restrictions.

**For additional help with recording and editing music using the Audacity software, pleas e

go to: htt p://audacity.sourceforge.net.

1. Click the “start” in the left corner of the computer, Select “Programs”, “Accessories”,

“Entertainment”, “Sound Recorder” to open the sound record interface. Select Ed it

and click “Audio Properties” in the bottom of the menu to open “Audio Properties”

interface;

Audacity and USB Connection

2. Sound Recorder Interface

3. Select Edit and click “Audio Properties” in the bottom of the menu to open “Audio

Properties” interface;

4. Audio Properties Interface

Audacity and USB Connection

5. Select sound recording volume and open “Recording Control” interface: Adjust the

line in volume to max or medium, and the sound wave will show on the interface

when recording.

Audacity and USB Connection

1. Using the attribute controls button at the top of the screen, go to beginning, Play,

Record, Pause, Stop and go to end. Use the File, Edit, View, Project, Generate, Effect

and Analyze menus to Save, Export, and edit the m us ic .

2. Select preferences at the bottom of the menu which will open up Audacity

Preferences. You can set the Audio I/O, Quality, File Formats, Spectrograms,

Directories Interface, Keyboard and Mouse in the Audacity preference Interface.

Audacity and USB Connection

Audacity Preference

3. Adjust the output and input volume.

EN EN

Output Volum e Output Volum e

Input Volume Input Volume

4. Select the record button ● to record the disc, the left and right tracks will s how on the

interface.

5.1

⑤

Press this button ●, start recording.

5.2

⑥

Click the button to skip to start;

5.3

⑦

Click the button to skip to end;

5.4

⑧

Click the ► button to play;

5.5

⑨

Click the button to pause the record play;

5.6 ⑩Click the button to stop the recording.

6. Expo rt the Music Files for WAV, MP3, Ogg.

• Once you have finished recording, you should save your music to the c omputer.

• Click File menu and move down to Export as WAV format, Mp3 format or Ogg format.

• Click on any format to save the music, and you will be asked for the file name of the

music recording.

NOTE: Audacity does not export Mp3 files directly;

you should downlo ad the LAME Mp3 encoder;

A link to find LAME Mp3can be found at http//:audacity.sourceforge.net

If do not see the sound waves on the Int erface, when recording, please adjust the line in

volume as follows:

Audacity and USB Connection

Specific Steps as follows:

1) Download “lame_enc.dll” file, and install it to the software list.

2) After starting the program, you have to click at "edit" in the menu bar, “Preference”,

“File Formats”, and click the “search”.

Audacity and USB Connection

3) After opened, it will come to the follo wing message box, click “YES ” to go to

“Lame_enc.dll”, and find the file’s location:

4) After you find the “Lame_enc .dll” file, open it and click “Y” to f inish the installation

Service and support

For helpdesk support and more information, please visit: www.lenco.com

Lenco offers service and warranty in accordance with European law, which means that in

case of repairs (both during and after the warranty period) you should contact your local

dealer.

Important note: It is not possible to send products that need repairs to Lenco directly.

Important note: If this unit is opened or accessed by a non-official service center in any

way, the warranty expires.

This device is not suitable for professional use. In case of professional use, all warranty

obligations of the manufacturer will be voided.

ENGLISH

Products with the CE marking comply with the EMC Directive (2004/108/EC) and the Low

Voltage Directive (2006/95/EC) issued by the Commission of the European Community.

The declaration of conformity may be consulted at

www.lenco.com

This symbol indicates that the relevant electrical product or battery should not be disposed

of as general household waste in Europe. To ensure the correct waste treatment of the

product and battery, please dispose them in accordance with any applicable local laws of

requirement for disposal of electrical equipment or batteries. In so doing, you will help to

conserve natural resources and improve standards of environmental protection in

treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment

Directive).

®AII rights reserved

Benutzerhandbuch

TT-34

Holzplattenspieler mit

USB-Anschluss

Seite laden ...

Classic Phono TT-34 Benutzerhandbuch

Classic Phono TT-34 Benutzerhandbuch

in anderen Sprachen

Verwandte Papiere

Sonstige Unterlagen