10 of 90 | English
evaporate water from the water tank; reducing the temperature of the air to create a more
refreshing experience in hot, dry conditions. For an even cooler experience, add the ice packs
(included) to the water tank.
• Before activating this mode, ensure there is sufcient water in the water tank as per the
instructions below.
• Press the humidication button on the control panel or remote control to activate this
mode. A water drop symbol will appear on the display panel.
• If the water drop symbol ashes, there is insufcient water in the tank. Fill as per instructions
below.
• Press the humidication button again to turn off Humidication Mode.
Timer Button with Control Panel
You can schedule your device to automatically turn on or off using the Timer Button on your
control panel or remote control.
To schedule your device to turn on:
1. Ensure the appliance is plugged in and the power socket is turned on.
2. Press the timer button and use the increase and decrease buttons to set when you would
like to device to turn on (starting at half an hour and up to 10 hours).
3. Select the desired settings that you would like the unit to revert to when it automatically
switches on using the mode, humidication, and increase & decrease buttons.
4. The LED display will blink for around 8 seconds on the desired setting. It will then display your
desired setting for 1 minute before turning off until your scheduled time is reached.
5. To cancel the turn-on timer press the power button twice.
Note: To set a turn-on timer with remote control, simply follow the above steps 1 to 5 but use the
timer button itself to increase the desired turn-on time.
Setting a turn-off timer:
1. Ensure the appliance is plugged in and the power socket is turned on.
2. Press the power button to turn the appliance on.
3. Press the timer button and use the increase and decrease buttons to set when you would
like to device to turn off (starting at half an hour and up to 10 hours).
4. The LED display will blink for 2 seconds to conrm a timer has been set.
5. To cancel the turn-off timer press the timer button and use the increase and decrease
buttons to set until timer indicator lights are showing ‘0.0’ or turn the appliance off.
Note: To set a turn-off timer with remote control, simply follow the above steps 1 to 5 but use the
timer button itself to increase the desired turn-off time.
FILLING THE WATER TANK
――
For the humidication mode to function the water must be above the “min” mark on the water
tank. Ensure fresh water is added to the water tank prior to every use.