SilverCrest SSSH 600 A1
12 - English
Proceed as follows:
Pour the food to be processed into a suitable container or pan.
Vertically guide the immersion blender (5) into the mixture.
Depending on requirements, start the hand-held blender with the switch (2) and select a suitable speed
with the speed controller (1). If you wish to use the maximum speed straight away, you can start the
hand-held mixer with the TURBO switch (3). Press and hold the desired button during the mixing or
blending process. If the immersion blender (5) sticks to the base of the container, briefly release the
button and then continue with the mixing process.
To achieve consistent processing of the mixture, gently move the hand-held blender up and down
during blending.
Once the mixing result meets your requirements, release the switch (2) or TURBO switch (3) as long as
the immersion blender (5) is still in the mixture.
Wait until the blade has stopped before you remove the immersion blender (5) out of the blended food.
7.2 Operating with the whisk (6)
Place the liquid to be processed in the measuring cup provided (fill with a maximum of 300 ml) or another
narrow, high-sided container with a flat base. This is the ideal requirement for great processing.
To prevent injuries caused by the rotating whisk (6), only switch the hand-held blender on once the whisk
(6) is immersed in the mixture.
Proceed as follows:
Pour the food to be processed into a suitable container.
Vertically guide the whisk (6) into the mixture.
Depending on requirements, start the hand-held blender with the switch (2) and select a suitable speed
with the speed controller (1). If you wish to use the maximum speed straight away, you can start the
hand-held mixer with the TURBO switch (3). Press and hold the desired button during operation. Reduce
the speed if too much spray is produced.
To achieve consistent processing of the mixture, gently move the hand-held blender up and down.
Once the mixing result meets your requirements, release the switch (2) or TURBO switch (3) as long as
the whisk (6) is still in the mixture.
Wait until the whisk (6) has stopped before you remove it out of the processed food.
8. Cleaning
Risk of injury! Take care when cleaning the hand-held blender! The blade in the immersion
blender (5) is very sharp!
Warning of damage to property! Do not use any scratching or abrasive cleaning
agents or abrasive objects (such as a metal scourer) for cleaning purposes. Failure to do so
may cause the hand-held blender to become damaged.