Silvercrest SRWK 800 A1 Operating Instructions Manual

RADIO ALARM CLOCK SRWK 800 A1

RADIO ALARM CLOCK

Operating instructions

IAN 313640

RADIOWECKER

Bedienungsanleitung

GB / IE / NI Operating instructions Page 1

DE / AT / CH Bedienungsanleitung Seite 35

Before reading, unfold the page containing the illustrations and

familiarise yourself with all functions of the device.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und

machen Sie sich anschließend mit allen Funktionen des Gerätes

vertraut.

A

B

C

GB

│

IE

│

NI

│

1 ■

SRWK 800 A1

Contents

Introduction ...................................3

Information about these operating instructions ................ 3

Copyright ............................................3

Notes on trademarks ................................... 3

Intended use .......................................... 4

Warning notices ....................................... 4

Safety .......................................5

Risk of electrocution .................................... 5

Battery information ..................................... 6

Basic safety instructions ................................. 7

Description of components ......................9

Symbols on the display ........................11

Setting up ...................................12

Package contents and transport inspection .................12

Requirements for the set-up location ....................... 13

Connecting the power supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Inserting batteries .....................................14

Wire aerial ..........................................14

Handling and operation ........................15

Switching the device on/oﬀ .............................15

Adjusting the volume ..................................15

Time/weekday .......................................16

Radio ..............................................17

Alarm times ..........................................19

Timer alarm (NAP function) .............................21

Automatic switch-oﬀ (SLEEP function) ......................22

Display lighting (DIMMER) .............................23

Charging external devices ..............................24

Troubleshooting ..............................25

■ 2

│

GB

│

IE

│

NI

SRWK 800 A1

Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Cleaning the housing ..................................27

Storage when not in use .......................27

Disposal .....................................28

Disposal of the device .................................28

Disposing of the batteries ............................... 28

Disposal of packaging .................................29

Appendix ....................................30

Technical data .......................................30

Notes on the EU Declaration of Conformity .................31

Kompernass Handels GmbH warranty ....................31

Service .............................................33

Importer ............................................33

GB

│

IE

│

NI

│

3 ■

SRWK 800 A1

Introduction

Information about these operating

instructions

Congratulations on the purchase of your new device.

You have selected a high-quality product. The operating instructions

are part of this product. They contain important information on safety,

usage and disposal. Before using the product, please familiarise

yourself with all operating and safety instructions. Use the product

only as described and for the range of applications speciﬁed. Retain

these operating instructions for future reference. Please also pass on

these operating instructions to any future owner.

Copyright

This documentation is protected by copyright. Any copying or

reproduction, including in the form of extracts, or any reproduction

of images (even in a modiﬁed state), is permitted only with the written

authorisation of the manufacturer.

Notes on trademarks

The SilverCrest trademark and the retail name are the property

of their respective owner.

All other names and products may be trademarks or registered

trademarks of their respective owner.

■ 4

│

GB

│

IE

│

NI

SRWK 800 A1

Intended use

This device is a consumer electronics device and is intended only for

receiving FM radio programmes, charging mobile terminals with a

USB connection and for use as an alarm or radio alarm in enclosed

spaces. The device is not intended for any other purpose, nor for use

beyond the scope described.

The device is not intended for use in commercial or industrial environ-

ments.

The manufacturer accepts no responsibility for damage caused by

failure to observe these instructions, improper use or repairs, unau-

thorised modiﬁcations or the use of unapproved replacement parts.

The risk is borne solely by the user.

Warning notices

The following warnings are used in these operating instructions:

DANGER

A warning notice at this hazard level indicates an

imminently hazardous situation.

Failure to avoid this hazardous situation could result in serious

injuries or even death.

► Follow the instructions in this warning notice to avoid the risk

of death or serious injury.

WARNING

A warning at this hazard level indicates a potentially

hazardous situation.

Failure to avoid this hazardous situation could result in injury.

► Follow the instructions in this warning label to prevent injury.

GB

│

IE

│

NI

│

5 ■

SRWK 800 A1

CAUTION

A warning at this hazard level indicates a risk of

property damage.

Failure to avoid this situation could result in property damage.

► Follow the instructions in this warning label to prevent property

damage.

NOTE

► A note provides additional information that makes handling the

device easier for you.

Safety

This section contains important safety instructions for handling the

device. This device complies with statutory safety regulations.

Improper use may result in personal injury and property damage.

Risk of electrocution

DANGER

Risk of fatal injury from electrocution!

Contact with live cables or components can result in

a fatal injury!

Comply with the following safety information in order to avoid

hazards due to electrical current:

► Use only the mains cable supplied with the device.

► Do not use the device if the mains plug or the mains cable is

damaged.

► When disconnecting the device from the mains supply, always

pull on the plug and never on the cable.

► Never touch the mains plug or the device with wet hands.

► Do not kink or crush the power cable or place heavy objects

on it. Route the mains cable so that it does not come into con-

tact with hot surfaces and no one can step on or trip over it.

■ 6

│

GB

│

IE

│

NI

SRWK 800 A1

DANGER

► Never open the device housing. Touching live connections or

making modiﬁcations to the electrical or mechanical assembly

can lead to a risk of electrocution and ﬁre.

► Do not insert any objects into the ventilation slots or other

openings on the device.

► The device consumes power in standby mode. To completely

disconnect the device from the mains power, the power plug

must be removed from the mains power socket. The device

must be positioned so that you have unrestricted access to the

mains socket at all times and can pull out the plug immediate-

ly in an emergency.

Battery information

DANGER

Risk of injury if batteries are handled incorrectly

► Keep batteries out of the reach of children. Children might put

batteries into their mouths and swallow them. If a battery has

been swallowed, seek medical assistance immediately.

► Do not throw batteries into a ﬁre. Never expose batteries to

high temperatures.

► Explosion hazard! Do not charge batteries unless they are

explicitly labelled as "rechargeable".

► Do not open the batteries or short-circuit them.

► Do not mix diﬀerent types of batteries. Empty batteries should

be removed because of the increased risk of leakage. The bat-

teries should also be removed from the device if it is not being

used for long periods.

► Battery acid leaking from a battery can cause skin irritation. If

it contacts your skin, rinse oﬀ with plenty of water. If the liquid

comes into contact with your eyes, rinse thoroughly with plenty

of water, do not rub and consult a doctor immediately.

► The section titled Inserting batteries describes how to correctly

insert and remove batteries.

GB

│

IE

│

NI

│

7 ■

SRWK 800 A1

Basic safety instructions

To ensure safe operation of the device, follow the safety guidelines

set out below:

■ This device may be used by children aged 8 years and above

and by persons with limited physical, sensory or mental capabili-

ties, or lack of experience and knowledge, provided that they are

under supervision or have been told how to use the device safely

and are aware of the potential risks. Do not allow children to

play with the device. Cleaning and user maintenance tasks may

not be carried out by children unless they are supervised.

■ DANGER! Do not allow children to play with the packaging

material! Keep all packaging materials away from children.

There is a risk of suﬀocation!

■ Check the device for visible external damage before use. Do not

operate a device that has been damaged or dropped.

■ If the cables or connections are damaged, have them replaced

by authorised specialists or Customer Service.

■ Keep the power cable away from hot surfaces and sharp edges.

Ensure that the power cable is not stretched tightly or kinked. Do

not allow the cable to dangle over edges (tripwire eﬀect).

■ All repairs must be carried out by authorised specialist companies

or Customer Service. Improper repairs may put the user at risk.

They will also invalidate any warranty claim.

■ Defective components must always be replaced with original

replacement parts. Compliance with the safety requirements can

only be guaranteed by using these replacement parts.

■ Do not make any unauthorised modiﬁcations or alterations to the

device.

■ If you move the device from a cold to a warm environment, allow

the device to acclimatise before using it. This can take up to two

hours.

■ Always place the device on a stable and level surface. It can be

damaged if dropped.

■ 8

│

GB

│

IE

│

NI

SRWK 800 A1

■ Do not expose the device to direct sunlight or high temperatures.

Otherwise, it may become overheated and irreparably damaged.

■ Ensure suﬃcient air circulation to prevent heat build-up.

Never cover the device. There is a risk of ﬁre!

■ Do not place the product near heat sources such as radiators or

other heat-generating devices.

■ Keep the device away from open ﬂames (e.g. candles) at all

times.

■ The device is not designed for use in rooms with high temperature

or humidity (e.g. bathrooms) or excessive dust.

■ Protect the device from drips or splashes of water. Never submerge

the device in water, do not place the device near water and do

not place any object ﬁlled with liquid (e.g. vases) on top of the

device.

■ If you notice a burning smell or smoke, pull out the plug from the

mains socket immediately and remove the batteries.

■ In the event of malfunctions and thunderstorms, disconnect the

plug from the mains socket.

GB

│

IE

│

NI

│

9 ■

SRWK 800 A1

Description of components

(See fold-out page for illustrations)

A. Front

1

Display Display of information (e.g. time,

alarm time, frequency, etc.)

2

VOLUME/

HOUR

‒

/+ dial

Adjusting the volume

Time/alarm: Set the hours

3

TUNING/

MIN.

‒

/+ dial

Radio: Select frequency/programme

position

Time/alarm: Set the minutes

B. Top side

4

/AMS button

Switch to standby mode, switch on

from standby mode

Radio: press and hold for automatic

station search with station storage

5

│‒ button

Alarm 1: Switch alarm 1 on and oﬀ;

select alarm signal or radio

Radio: Press repeatedly and brieﬂy

to recall the preset stations; press

and hold to scan stations downwards

automatically

6

SNOOZE/

DIMMER button

Alarm: Snooze button (switch oﬀ

alarm for 9 minutes)

Radio: Change display brightness

(2 brightness levels, Oﬀ)

7

│+/MEM button

Alarm 2: Switch alarm 2 on and

oﬀ; select alarm signal or radio

Radio: Store stations manually; press

and hold for automatic station search

upwards

■ 10

│

GB

│

IE

│

NI

SRWK 800 A1

8

SLEEP/NAP │

12 / 24 button

Press brieﬂy: Setting the sleep time

(SLEEP)

Press repeatedly: Select sleep time

Press and hold: Setting the time

alarm (NAP)

Press repeatedly: Setting the alarm

time for the timer alarm

TIME SET: press brieﬂy to set time,

12h/24h display, day of week

C. Back/right side

9

Battery compartment

0

Speaker

q

Mains cable AC

~

w

Wire aerial ANT. For FM reception

e

USB 5V

1A USB connection: for charging

mobile devices only

r

Function switch

CLOCK

AL1 SET

AL2 SET

TIME SET

Time/radio mode

Set alarm 1

Set alarm 2

Setting the time

GB

│

IE

│

NI

│

11 ■

SRWK 800 A1

Symbols on the display

t

Alarm 1 active

alarm type: signal

alarm type: radio

5/7 Alarm active from Monday to Friday

z

SLEEP Automatic switch-oﬀ activated

u

NAP Timer alarm (NAP) active

i

Display time

o

Activated weekdays of the alarm function

p

Alarm 2 active

alarm type: signal

alarm type: radio

5/7 Alarm active from Monday to Friday

a

ZZZ Timer alarm (NAP) is activated

s

SNOOZE Snooze function activated

d

MHz Radio frequency unit (FM)

■ 12

│

GB

│

IE

│

NI

SRWK 800 A1

f

Display of radio frequency/alarm time/

programme position

g

FM FM radio station is being received

h

MEMORY Radio station is stored

j

PM 12-hour display is active (PM is only shown

between 12 noon and 12 midnight when

12-hour display is activated, can be switched

to 24-hour display)

Setting up

Package contents and transport inspection

DANGER

► Do not allow children to play with packaging materials.

There is a risk of suﬀocation.

♦ Remove all parts of the device, the quick start guide and the

operating instructions from the packaging.

♦ Remove all packaging materials from the device.

Check the contents of the package. The following components are

included in delivery:

▯ Clock radio

▯ Quick start guide

▯ These operating instructions

NOTE

► Check the package for completeness and signs of visible

damage.

► If the delivery is incomplete or damage has occurred as a result

of defective packaging or during transport, contact the Service

hotline (see section Service).

GB

│

IE

│

NI

│

13 ■

SRWK 800 A1

Requirements for the set-up location

For safe and trouble-free operation of the device, the set-up location

must fulﬁl the following requirements:

■ Place the device on a ﬁrm, ﬂat and level surface.

■ Position the device so that the speaker

0 is not covered.

■ Do not operate the device in a hot or very wet environment or

in the vicinity of combustible materials.

■ The mains socket must be easily accessible so that the plug can

be easily pulled out in an emergency.

Connecting the power supply

CAUTION

► Before connecting the device, compare the connection data

(voltage and frequency) on the rating plate on the rear of the

device with that of your electric supply. This data must agree so

that the device is not damaged.

♦ Connect the mains cable

q to a mains socket. The device is now

in standby mode.

■ 14

│

GB

│

IE

│

NI

SRWK 800 A1

Inserting batteries

By inserting 2 x 1.5V batteries (type AAA/Micro/LR03), you prevent

the set time, alarm times and stored radio stations from being deleted

in the event of a power failure. The batteries make sure that the internal

clock continues to run even during a power outage. The display 1

will go out, however. When power is restored, the correct time auto-

matically appears on the display 1.

NOTE

► The device can also be operated using the mains power connec-

tion only without batteries. Operation using the batteries only is

not possible.

► In the event of a power failure, all settings (such as time, alarm

times and stored radio stations) will be reset if there are no

charged batteries in the battery compartment

9.

♦ Open the battery compartment cover 9 on the back of the

device.

♦ Insert 2 x 1.5 V AAA/Micro/LR03 batteries (not supplied) into

the battery compartment

9. Place the batteries into the battery

compartment 9 as indicated on the polarity diagram.

♦ Close the battery compartment 9 by placing the cover on it and

snapping it into place.

Wire aerial

♦ Completely unwind the wire aerial w for FM reception.

GB

│

IE

│

NI

│

15 ■

SRWK 800 A1

Handling and operation

Switching the device on/oﬀ

♦ Brieﬂy press the /AMS button 4 to switch on the device.

♦ Brieﬂy press the

/AMS button 4 again to switch the device

into standby mode. The time is still displayed.

NOTE

► The time is also displayed in standby mode if the backlight is not

switched oﬀ with the SNOOZE/DIMMER button

6 or in night

mode between 11 pm and 4:59 am.

► The device still consumes a small amount of power in standby

mode. Disconnect the mains power plug if you do not intend to

use the device for an extended period of time. You will need to

reset the time, alarm time and radio station if no batteries are

inserted.

Adjusting the volume

♦ Turn the VOLUME/HOUR

‒

/+ dial 2 clockwise to increase

the volume.

♦ Turn the VOLUME/HOUR

‒

/+ dial 2 anticlockwise to

decrease the volume.

NOTE

► Turning the VOLUME/HOUR

‒

/+ dial

2 will brieﬂy show the

set volume on the display 1 with a value between "00" (mute)

and "15" (maximum volume).

► The volume setting is saved. The next time the device is switched

on, it starts at the last set volume.

■ 16

│

GB

│

IE

│

NI

SRWK 800 A1

Time/weekday

Setting the time

♦ Set the function switch r to TIME SET. The time display ﬂashes.

♦ Turn the VOLUME/HOUR

‒

/+ dial 2 clockwise or anticlock-

wise to set the hours.

♦ Turn the TUNING/MIN.

‒

/+ dial 3 clockwise or anticlockwise

to set the minutes.

♦ Set the function switch

r to CLOCK. The time display stops

ﬂashing and the time setting is saved.

12h/24h display

NOTE

► If the 12h display is set, PM appears on the left of the display

1

from 12 noon until 11:59 at night.

► The default setting of the time is the 12h display.

♦ Set the function switch

r to TIME SET. The time display ﬂashes.

♦ Brieﬂy press the SLEEP/NAP │12 / 24 button 8 once. 24H or

12H ﬂashes on the display 1.

♦ Turn the VOLUME/HOUR

‒

/+ dial 2 clockwise or anticlock-

wise to switch between the 24h and 12h display.

♦ Set the function switch

r to CLOCK. The display stops ﬂashing

and the 12h/24h display setting is stored.

GB

│

IE

│

NI

│

17 ■

SRWK 800 A1

Setting the weekday

NOTE

► To use the alarm function, it is necessary to set the current day

of the week.

♦ Set the function switch r to TIME SET. The time display ﬂashes.

♦ Press the SLEEP/NAP │12 / 24 button

8 button brieﬂy twice.

P-1 ﬂashes on the display 1.

♦ Turn the VOLUME/HOUR

‒

/+ dial 2 clockwise or anticlock-

wise to set the current day of the week.

P-1 = Monday, P-2 = Tuesday, P-3 = Wednesday, P-4 = Thursday,

P-5 = Friday, P-6 = Saturday and P-7 = Sunday.

♦ Set the function switch

r to CLOCK. The display stops ﬂashing

and the day of the week setting is saved.

Radio

The radio allows you to receive FM radio stations. You can store up to

20 preset FM radio stations at a time.

Automatic station search and station storage

(AMS)

♦ In radio mode, press the /AMS button 4 for approx. 2 seconds.

The station search starts and the ﬁrst 20 FM radio stations found

are automatically stored with increasing frequency in the program-

me positions P01 to P20. When a station is stored, MEMORY is

shown on the display 1. After the station search is complete,

the station stored in the ﬁrst programme space P01 is played

automatically.

NOTE

► The automatic station search replaces the stations already

stored in the programme spaces.

Seite laden ...

Silvercrest SRWK 800 A1 Operating Instructions Manual

Silvercrest SRWK 800 A1 Operating Instructions Manual

in anderen Sprachen

Verwandte Papiere

Sonstige Unterlagen