12
9. Charging Steps
·
Please make sure that the charging port is dry and clean;
·
Open the charger’s cover;
· Please firstly connect one end of the charger with the power supply (Input: AC100V-240V;
50/60HZ; Output: DC42V-1A/1.5; as per the order’s required.) and confirm than the
charging indicator turns green; then, please connect the other end with the electric
scooter;
·
When the charger’s red indicator is ON, it indicates Normal Charging; otherwise,
please check whether corresponding connection is successfully completed;
·
When the indicator turns green from red, it means that the battery is fully charged; please
stop charging the battery; otherwise, the battery’s service life will be shortened.
·
Please apply corresponding plug and switch according to local standards;
·
Please charge and store the battery pursuant to local laws and regulations; otherwise,
the battery may be damaged and its service life will be shortened;
·
It will take about 5 hours to fully charge this electric scooter;
·
Please make sure that the charging environment is clean and dry;
·
Please do not charge this electric scooter when the charging port is damp.
·
After the charger is connected, it can be powered ON/OFF, but its wheels are still invalid.
Please do not drive when charging the scooter.
10. Driver’s Weight Limit
·
Driver’s Weight must be restricted in order to:
·
1. Protect the driver’s safety;
·
2. Reduce the possibility of damaging this electric scooter
·
Maximal Weight: 95kg