Silvercrest SFA 40 A2 Operating Instructions Manual

Typ
Operating Instructions Manual
HANDS-FREE SYSTEM SFA 40 A2
IAN 285668
HANDS-FREE SYSTEM
Operating instructions
HANDSFREE-SET
Gebruiksaanwijzing
FREISPRECHANLAGE
Bedienungsanleitung
GB / IE / NI Operating instructions Page 1
NL / BE Gebruiksaanwijzing Pagina 29
DE / AT / CH Bedienungsanleitung Seite 57
Before reading, unfold the page containing the illustrations and familiarise
yourself with all functions of the device.
Vouw vóór het lezen de pagina met de afbeeldingen open en maak u
vertrouwd met alle functies van het apparaat.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen
Sie sich anschließend mit allen Funktionen des Gerätes vertraut.
SFA 40 A2
GB
IE
NI
 1
Contents
Introduction .................................. 3
Information about these operating instructions ................3
Notes on trademarks ...................................3
Intended use ..........................................3
Warnings used ........................................4
Safety ....................................... 5
Basic safety instructions .................................5
Notes on the radio interface .............................7
Notes on batteries and rechargeable batteries ...............8
Description of components ..................... 9
Operation .................................. 10
Check package contents ...............................10
Disposal of the packaging ..............................10
Inserting the Li-ion battery ...............................11
Charging the Li-ion battery ..............................11
Handling and use ............................ 12
Switching the hands-free set on and off ....................12
Pairing the hands-free set with a compatible mobile phone .....13
Auto power function ...................................14
Multipoint function ....................................15
Activating/deactivating the multipoint function ..............16
Call function .........................................16
Accepting/ending a call ...............................17
Handing over a call between hands-free set and mobile phone . 17
Manage calls ........................................17
Automatic call answering ...............................18
Rejecting a call .......................................18
Setting the volume ....................................18
Muting the microphone ................................19
Resetting the hands-free set .............................19
SFA 40 A2
2 
GB
IE
NI
Music playback ......................................19
Attachment to the sun visor ..............................20
Troubleshooting ............................. 20
Changing the fuse in the car charger adapter ..............22
Cleaning .................................... 23
Storage when not in use ....................... 23
Disposal ....................................24
Disposal of the device .................................24
Disposal of batteries ...................................24
Appendix ................................... 25
Technical details ......................................25
Notes on the EU Declaration of Conformity .................26
Kompernass Handels GmbH warranty ....................26
Service .............................................28
Importer ............................................28
SFA 40 A2
GB
IE
NI
 3
Introduction
Information about these operating instructions
Congratulations on the purchase of your new device.
You have selected a high-quality product. The operating instructions
are part of this product. They contain important information about
safety, usage and disposal. Before using the product, please familiarise
yourself with all operating and safety instructions. Use the product
only as described and for the range of applications specified. Keep
these operating instructions as a reference and store them near the
product.
Please also pass these operating instructions on to any future owner.
Notes on trademarks
- The Bluetooth
®
logotype and Bluetooth
®
logo are registered
trademarks of Bluetooth SIG, Inc. (Special Interest Group). Any use
of the trademarks by Kompernaß Handels GmbH is made under
the provisions of a licence.
- USB
®
is a registered trademark of USB Implementers Forum, Inc.
All other names and products may be trademarks or registered
trademarks of their respective owners.
Intended use
The Bluetooth
®
hand-free set SFA 40 A2 is an information tech-
nology device for use in vehicles with an on-board power supply of
12–24V. This device is intended to establish a hands-free connec-
tion to a mobile phone via Bluetooth
®
to enable hands-free phone
calls while driving without the need to hold the mobile telephone to
your ear. This device may only be used for private domestic purposes,
it is not suitable for industrial or commercial applications.
SFA 40 A2
4 
GB
IE
NI
The device is not intended for any other purpose, nor for use beyond
the scope described. The manufacturer accepts no responsibility for
damage caused by failure to observe these instructions, improper
use or repairs, unauthorised modifications or the use of unapproved
replacement parts. The risk shall be borne solely by the user.
Warnings used
The following types of warning are used in these operating instruc-
tions:
DANGER
A warning at this hazard level indicates a poten-
tially hazardous situation.
Failure to avoid this hazardous situation could result in severe
injuries or even death.
Follow the instructions in this warning notice to avoid the risk
of serious injuries or death.
CAUTION
A warning notice at this hazard level indicates a
risk of material damage.
Failure to avoid this situation could result in material damage.
Follow the instructions in this warning notice to prevent material
damage.
NOTE
A note provides additional information that will assist you in
using the device.
SFA 40 A2
GB
IE
NI
 5
Safety
This section contains important safety instructions for using the
product. Improper use may result in personal injury and property
damage.
Basic safety instructions
To ensure safe operation of the product, follow the safety guidelines
set out below:
Ŷ This device may be used by children aged 8 years and above
and by persons with limited physical, sensory or mental capabili-
ties, or lack of experience and knowledge, provided that they are
under supervision or have been told how to use the device safely
and are aware of the potential risks. Children must not play with
the device. Cleaning and maintenance tasks may not be carried
out by children unless they are supervised.
Ŷ
DANGER! Do not allow children to play with the packaging
material! Keep all packaging materials away from children. There
is a risk of suffocation!
Ŷ Check the device for visible external damage before use. Do not
operate a device that has been damaged or dropped.
Ŷ If you notice smoke, unusual noises or smells, disconnect the
device from the power supply and remove the battery from the
hands-free set. Have the device checked by a qualified specialist
before using it again.
Ŷ Never open the housing of the device. None of the components
in the device can be serviced or replaced by the user.
Ŷ Do not make any unauthorised modifications or alterations to the
device.
Ŷ All repairs must be carried out by authorised specialist companies
or by the Customer Service department. Improper repairs may
put the user at risk. It will also invalidate any warranty claims.
SFA 40 A2
6 
GB
IE
NI
Ŷ Repairs to the device during the warranty period may only be
carried out by a customer service department authorised by the
manufacturer. Otherwise, no warranty claims will be held for any
subsequent damages.
Ŷ Defective components must always be replaced with original
replacement parts. Compliance with the safety requirements can
only be guaranteed by using these replacement parts.
Ŷ Never operate the device in the vicinity of naked flames (e.g.
candles), and do not place burning candles on or next to the
device. This will help to prevent fires.
Ŷ Do not expose the device to water spray or dripping water, and
do not place liquid-filled objects such as vases or open drinks
containers on or near the device.
Ŷ Never subject the device to extreme heat or humidity. This par-
ticularly applies to storage in a car. If the car is at a standstill for
longer periods and the weather is warm with solar irradiation,
high temperatures occur in the car interior and the glove compart-
ment. Remove electrical and electronic devices from the vehicle.
Ŷ Always unplug the car charger adapter by pulling on the plug –
do not pull the cable itself.
Ŷ Do not place any items of furniture or other heavy objects on the
cable and ensure that it cannot become bent.
Ŷ The cable must be routed so it does not interere with the opera-
tion of the vehicle. The cable may not be routed in the deployment
area of the airbag, otherwise this could cause serious injuries if the
airbag is triggered.
Ŷ Do not use any adapter or extension cable to connect the car
charger adapter to the power supply.
Ŷ
ATTENTION! Comply with all local laws. Your hands must
always be free to operate the vehicle safely when you are driv-
ing. Traffic safety must always take priority whilst driving.
SFA 40 A2
GB
IE
NI
 7
Ŷ Only operate the hands-free set on those occasions in which the
traffic situation permits it and in which you will not endanger,
injure, obstruct or cause annoyance to other road users. Therefore
you should only operate the hands-free set in a stationary vehicle.
Ŷ Do not allow yourself to be distracted from the traffic situation by
operating the hands-free set or reading its display. Before starting
your journey, familiarise yourself with how to use the device and
practice how to use it safely.
Ŷ Always position the hands-free set in your vehicle so that it does
not obstruct your view and is not mounted in a personal impact
zone or the deployment area of the airbag. Read the instruction
manual of the vehicle manufacturer.
Ŷ Always position the hands-free set in your vehicle so that it does
not interfere with your operation of the vehicle, ideally on the sun
visor.
Notes on the radio interface
Ŷ Keep the device at least 20 cm away from a pacemaker, as the
proper functioning of the pacemaker could be affected by radio
waves.
Ŷ The transmitted radio waves can cause noise interference in hearing
aids.
Ŷ Do not use the device with the radio components switched on
in the presence of flammable gases or in a potentially explosive
atmosphere (e.g. in a paint shop), as the transmitted radio waves
can cause an explosion or ignite a fire.
Ŷ The range of the radio waves is dependent on the environment
and the ambient conditions.
Ŷ Data transmissions via a wireless connection can be intercepted
by unauthorised third parties.
SFA 40 A2
8 
GB
IE
NI
Notes on batteries and rechargeable batteries
DANGER
Mishandling batteries can cause fires, explosions,
leakages or other hazards!
The hands-free set may only be used with a Li-ion battery, type
BL-5B. Otherwise, there is a risk of fire and/or explosion!
Keep batteries out of the hands of children.
Do not leave batteries lying around. There is a risk of them
being swallowed by children or pets. If this happens, consult a
doctor immediately!
Never short-circuit, dismantle, deform or reverse the polarity
of batteries, and never throw them into a fire. There is a risk of
explosion!
Leaking or damaged batteries can cause skin irritations when
touched. Therefore, use suitable protective gloves. If the
product comes in contact with your skin, rinse with plenty of
water. If the chemicals come into contact with your eyes, rinse
thoroughly with plenty of water, do not rub and consult a doc-
tor immediately.
During extended periods of non-use (e.g. during storage),
remove the battery from the hands-free set to prevent damage
caused by battery leakage.
SFA 40 A2
GB
IE
NI
 9
Description of components
(See fold-out page for illustrations)
Loudspeaker
Mute button
Button
Button
Multi-function button
Microphone
Operating LED
Micro USB connection
Battery compartment
Recess for mounting clip
Mounting clip
Li-ion battery BL-5B
Car charger adapter
Operating LED
SFA 40 A2
10 
GB
IE
NI
Operation
Check package contents
(See fold-out page for illustrations)
The product includes the following components:
Ɣ Hands-Free System SFA 40 A2
Ɣ Mounting clip
Ɣ Li-ion-rechargeable battery BL-5B
Ɣ Car charger adapter
Ɣ These operating instructions (not shown)
Unpack all parts of the device from the packaging and remove
all packaging materials.
NOTE
Check the package for completeness and signs of visible
damage.
If the delivery is incomplete or damage has occurred as a
result of defective packaging or during transport, contact the
Service hotline (see section "Service").
Disposal of the packaging
The packaging protects the device from damage during transport.
The packaging materials have been selected for their environmental
friendliness and ease of disposal, and are therefore recyclable.
Returning the packaging to the material cycle conserves
raw materials and reduces the amount of waste that is
generated. Dispose of packaging materials that are no
longer needed in accordance with applicable local
regulations.
SFA 40 A2
GB
IE
NI
 11
Inserting the Li-ion battery
Open the battery compartment by pressing on the battery
compartment cover and pushing it in the direction of the em-
bossed arrow.
Insert the Li-ion battery
into the battery compartment . En-
sure that the three contacts of the battery lie in the same corner
as the three pins in the battery compartment
. The type plate of
the rechargeable batteries should be facing upwards. The struc-
ture of the battery will not allow it to be inserted any other way.
After inserting the battery, close the battery compartment
with the battery compartment cover.
Charging the Li-ion battery
Before first use, the Li-ion battery must be fully charged.
Connect the micro USB plug of the supplied car charger adapter
to the micro USB charger connection of the hands-free set.
Plug the car charger adapter into a suitable socket in your ve-
hicle. The operating LED
lights up orange during charging.
Once charging is completed (around 3 hours), the operating
LED goes out.
Unplug the car charger adapter from the vehicle socket and the
hands-free set.
NOTE
If the operating LED
starts flashing orange every 10
seconds and there is a series of beeps every 5 minutes, the
battery charge level is low and the battery needs charging.
SFA 40 A2
12 
GB
IE
NI
CAUTION
Only charge the battery in the hands-free set, as the cor-
responding charging electronics are built into the device.
Charge the battery only when the motor is running to pre-
serve your car battery.
Do not charge the battery while the hands-free set is attached
to the sun visor as the connecting cable may interfere with the
operation of the vehicle.
Alternatively, the battery can be charged on a PC or an exter-
nal mains adapter. You will need a connecting cable with a
suitable USB connection.
Handling and use
This section provides you with important information on handling and
using the device.
Switching the hands-free set on and off
Press the multifunction button for about 3 seconds
until you hear a high-pitched beep and the operating LED
lights up blue. The hands-free set is now in standby mode. The
operating LED now flashes blue every 6 seconds.
NOTE
If no mobile phone is paired with the hands-free set, it
switches after a short time into pairing mode.
Press the multifunction button
again for about 5
seconds to switch off the hands-free set. You will hear a low
beep and the operating LED lights up briefly orange before go-
ing out completely. The hands-free set is now switched off.
SFA 40 A2
GB
IE
NI
 13
Pairing the hands-free set with a compatible
mobile phone
Before you can use the hands-free set, you must pair it with a com-
patible mobile telephone.
With the hands-free set switched off, press the multifunction
button
for about 6 seconds until you hear a ris-
ing series of beeps and the operating LED flashes alternately
blue and orange. The hands-free set is now in pairing mode for
about 2 minutes.
If the pairing does not happen within this time, you will here two
low beeps and the hands-free set switches off.
Set the mobile telephone so that it scans for Bluetooth
®
de-
vices. A detailed description of how to do this is to be found in
the operating instructions for your mobile telephone.
Select the entry SFA 40 A2 from the list of found devices in
your mobile phone to pair the two devices. The name of the
hands-free set SFA 40 A2 now appears on the list of paired
devices on your mobile phone.
NOTE
If you are asked to enter a PIN during pairing, enter 0000.
If the pairing is successful, you will hear a short beep.
The hands-free set is now in standby mode and the operating
LED
flashes blue every 10 seconds. If the connection to the
mobile phone is lost, the operating LED flashes briefly blue
every 10 seconds.
SFA 40 A2
14 
GB
IE
NI
Auto power function
The auto power function enables you to set the device so that it
switches back on automatically and connects to a known mobile
phone as soon as the built-in vibration sensor is activated.
If the device has lost its connection to a mobile phone, e.g. due to
excessive distance, and it has not been restored within 10 minutes,
it will switch to auto power function (if this has been previously acti-
vated). If there is a vibration, e.g. caused by opening the car door,
the device switches back on and auto matically attempts to connect
to known mobile phones for about 2 minutes. If there is no known
mobile phone in range, the device switches back to auto power func-
tion. The auto power function also works if you have switched the
device off manually.
NOTE
It is however possible that the automatic connection cannot be
made depending on the mobile phone used. If this happens, press
the multifunction button
to restore the connection.
With some mobile phones, the connection must also be
confirmed on the mobile phone itself. Please also refer to the
operating instructions for the respective mobile phone.
You can only switch on the auto power function if the hands-
free set is not in pairing mode.
If you do not have your phone with you during your journey,
we recommend switching off the auto power function. In this
way you can prevent the device from switching itself on and off
due to vehicle movements.
Press and hold the mute button
for about 2 seconds to
turn on the auto power function. The operating LED
briefly
lights up green.
SFA 40 A2
GB
IE
NI
 15
Press and hold the mute button again for about 2 sec-
onds to turn off the auto power function. The operating LED
lights up briefly green three times.
Multipoint function
The multipoint function allows you to use the hands-free set with two
mobile phones simultaneously. This is useful for users with a private
and a business mobile phone.
The pairing of additional mobile phones is carried out in the
same manner as described in the section “Pairing the hands-
free set with a compatible mobile phone”. Start the pairing
process for each phone with the hands-free set switched off.
If you have paired several mobile phones, the hands-free set will now
have several “known” devices available. This status is a prerequisite
for an active connection between the hands-free set and other
mobile phones. A maximum of 8 mobile phones can be saved as
“known” devices. The number of devices that can be actively linked
to the hands-free set is limited to two.
As soon as one or two of the known devices come into range of the
hands-free set, the connection to the devices is made automatically.
In some cases, you must confirm the connection manually on your
mobile phone. If a third “known” device comes into range of the
hands-free set, the connection to this device will remain blocked until
one of the two active connections is broken or one of the two devices
leaves the transmission range. If the connection of one of the paired
devices is broken, the link becomes free for the third (waiting) device.
If two mobile phones are linked to the hands-free set, different ring
tones are used for incoming calls.
SFA 40 A2
16 
GB
IE
NI
Activating/deactivating the multipoint function
The multipoint function is activated by default on delivery.
To disable the multipoint function:
In standby mode, press the
button for approx. 3 seconds.
The operating LED lights
up briefly orange before going
out completely. You will hear a low beep, followed by a series
of beeps decreasing in pitch. The hands-free set switches off
and multiple mobile phones can no longer be paired with the
device.
To enable the multipoint function:
In standby mode, press the
button for approx. 3 seconds.
You will hear a rising series of beeps. The hands-free set can
now be paired with several mobile phones.
NOTE
With some mobile phones, it is possible that the hands-free set
must be restarted if several mobile phones are connected.
Call function
Use your mobile phone to make a call in the usual way.
To redial the last used number, press the multifunction button
twice in quick succession.
To activate voice dialling, press the multifunction button
once briefly.
NOTE
Voice dialling is only available with mobile phones that support
this function. For more information on voice dialling, refer to the
instruction manual of your mobile phone.
SFA 40 A2
GB
IE
NI
 17
Accepting/ending a call
When there is an incoming call, the operating LED flashes blue
every 3 seconds and you can hear a ring tone over the hands-free
set. Even if the call tone is switched off on your mobile phone, you
will still hear the ring tone via the hands-free set.
Press the multifunction button
once briefly to ac-
cept the call.
Press the multifunction button
once briefly to finish
the ongoing call.
Handing over a call between hands-free set and
mobile phone
During a call you can hand over a call between the hands-free set
and the mobile phone.
Press the
button and the button simultaneously during
a call. You will hear a beep and the call will be transferred to
the mobile phone.
Pressing the
button and the button again will transfer
the call back to the hands-free set.
Manage calls
If you have connected two mobile phones to the hands-free set simul-
taneously, you can put one call on hold in order to take a call from a
second mobile phone and to toggle between the two calls.
Press the multifunction button
twice briefly to ac-
cept the call on the second mobile phone while talking on the
first mobile phone. The first call is put on hold.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88

Silvercrest SFA 40 A2 Operating Instructions Manual

Typ
Operating Instructions Manual

in anderen Sprachen