Eaton CGLine+ Web Series Quick Installation Manual

CGLine+ Web Controller

Quick Installation Manual

Kurzanleitung

Guide d’installation rapide

Target group: Skilled electricians

Zielgruppe: Elektrofachkraft

Public cible : Électriciens conrmés

CGLine+ Web Touchscreen Controller

CGL+ CGVision Touchscreen S/Controller

CGL+ CGVision Touchscreen G/Controller

English ............................ 2

Deutsch ........................18

Français ........................34

Introduction

2

Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com

1 Introduction

This short instruction manual is a quick commissioning procedure of the CGLine+ Web

Touchscreen Controller. A complete Installation and Operating Instruction is download-

able from the website of the CGLine+ web controller, see page 6 or on the desktop of

the tablet.

1.1 Description

1.1.1 Stand-alone system

CGL+ CGVision Touchscreen S/Controller 40071361083

••

Configuration and visualisation of the integrated CGLine+ Web-Controller as stand-

alone solution.

Safety notes

CAUTION

••

The CGLine+ Web Touchscreen

Controller must be operated in undam-

aged and functional state.

••

When carrying out maintenance work

with the device the device must be de-

energised.

••

When carrying out device maintenance,

observe national safety and accident

prevention regulations and the safety

notes in the operating instructions

below designated with

.

Conformity to standards

Compliant with: EN 62368.

Developed, manufactured and tested

according to DIN EN ISO 9001.

GB

CGL+ CGVisionTouchscreen S/Controller

Line 1

1 2 3 200

Line 2

Line 3

Line 4

1 2 3 200

Wifi feature of the embedded

tablet is not used for this

application and disabled in this

equipment.

Enabling this function causes the

loss of the certification.

Introduction

3Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com

1.1.2 Centralised supervision

CGLine+ Web Touchscreen Controller 40071361056

••

Visualisation of the integrated CGLine+ Web-Controller and any external

connected CGLine+ Web-Controller via the integrated web browser on the

touchscreen.

••

An optional CGVision visualisation software allows a centralised monitoring and con-

trol of up to 32 CGLine+ Web Touchscreen Controller or CGLine+ Web-Controller.

GB

Ethernet

TCP / IP

CGLine+ Web Touchscreen

Controller :

CGLine+ W eb-Controller

CGLine+ Bus

CGLine+ W eb Touchscreen Controller

Line 1

1 2 3 200

Line 2

Line 3

Line 4

Fully centralised

conguration and

monitoring of all CGLine+

Web Touchscreen Controller

CGL+ CGVision Touchscreen G/Controller 40071361084

••

Configuration and visualisation of the integrated CGLine+ Web-Controller and a

group of up to 9 external via ethernet connected CGLine+ Web-Controller.

Line 1

Line 2

Line 3

Line 4

Ethernet

TCP / IP

CGLine+ W eb Touchscreen Controller

CGLine+ CGVision

Touchscreen G/Controller

1 2 3 200

CGLine+ W eb T ouchscr een Controller

Line 1

1 2 3 200

Line 2

Line 3

Line 4

Line 1

Line 2

Line 3

Line 4

Optional:

1 2 3 200

Line 1

Line 2

Line 3

Line 4

1 2 3 100

CGLine+ W eb-Controller

CGLine+ Bus

Line 1

Line 2

Line 3

Line 4

Line 1

Line 2

Line 3

Line 4

1 2 3 200

1 2 3 100

Introduction

4

Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com

GB

1.1.3 Features

General

••

Visualisation of up to 800 CGLine+ self-contained luminaires

••

10.1-inch colour touchscreen display for an easy handling of the system

••

Automatic luminaire search function

••

Automatic function and duration test for up to 8 free selectable test groups of

CGLine+ luminaires

••

Two free programmable digital inputs and two relay outputs

••

Full control commands of each selectable luminaire

••

Logbook function for a period of at least 4 years

CGLine+ Web Touchscreen Controller

••

Visualisation of any no. of external networked CGLine+ Web-Controller via

integrated web browser

••

Embedded building layout

••

Optional central CGVision PC allows a centralised monitoring of up to 32

CGLine+ Web Touchscreen Controller or CGLine+ Web-Controller

CGL+ CGVision Touchscreen S/Controller

••

Stand-alone system for up to 800 CGLine+ self-contained luminaires

••

Full control, monitoring and configuration of each luminaire via integrated

CGVision Lite visualisation software

CGL+ CGVision Touchscreen G/Controller

••

Group visualisation of up to 9 external networked CGLine+ Web-Controller

••

Full control, monitoring and configuration of each luminaire via integrated

CGVision Lite visualisation software for up to 10 CGLine+ controller

Powering the CGLine+ Web Touchscreen controller

5Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com

1.1.4 Technical data

Table 1. Technical data

Power supply (typ.)

230 V AC, 50/60 Hz

Power consumption

< 12 W standby

< 38 W full load

Connection terminals

max. 2.5 mm² flexible

Permissible ambient temperature

0 ° to 35 °C

Storage temperature

0 ° to 35 °C

Protection rating

IP 20

Dimensions

345 × 397 × 111 mm

Housing type

Plastic, wall-mounted housing

2 Powering the CGLine+ Web Touchscreen controller

Power up the Touchscreen controller. The web controller turns on.

To switch the tablet on:

••

If the tablet is off, press the ON/OFF button during 3 seconds using a screw-

driver.

••

If the tablet is in standby mode, press the Windows button.

GB

345

397

57

111

ON/OFF button

Windows button

Operation of the visualisation

6

Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com

3 Operation of the visualisation

ote:N This quick start manual describes only the basic operation of the software.

On the desktop of the Touchscreen panel is a link to a PDF file with a complete

description of the software.

3.1 CGLine+ Web Touchscreen Controller

Start Internet Explorer by using the shortcut in the bottom access bar.

The start screen of the CGLine+ web controller now opens.

A login is necessary. Two accounts are available:

User

Admin

Password

EATON

User

Password

GUEST

All documentation are pre-loaded in the following directory of the Windows system:

Documents > Touchscreen controller > Manual

The web server manual is available from the web server.

All other manuals are available from the CGLine+ Web Touchscreen Controller.

GB

Operation of the visualisation

7Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com

3.2 CGL+ CGVision Touchscreen S/Controller

Start the visualisation software by double-clicking on the CGLine Plus

Controller icon on the desktop of the touchscreen:

A message of the user account control appears. Click on YES.

3.2.1 Start image – CGLine+ Controller Software

The following background image is shown after the start-up process of the

CGLine+ Controller software:

IMPORTANT

If the settings of the touch panel need to be modified,

tap on the lower edge to open the Windows task bar.

All functions are presented in detail in the following sections. A summary of

functions is given here:

ote:N All operations are protected with a PIN number. Without typing in a PIN

number, the status can only be displayed.

Select the British flag to access the system settings, e.g. to modify the language

of operation.

The status of the CGLine+ Web Controller is shown on the left side. Tap on the

button under the status message to access the internal display levels of the

Controller.

The middle three display windows show the status (summary messages) of all

connected self-contained luminaires according to DIN VDE 0100-560 (Displays

GB

Operation of the visualisation

8

Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com

GB

560.6.14). These include:

••

Operation = normal operation;

••

battery operation, e.g. in case of power failure; and

••

fault summary, e.g. a battery failure of a luminaire.

Click on the coloured area to access a detailed presentation of the messages.

All connected self-contained luminaires can be blocked simultaneously on the

right side.

A function test of all luminaires is started, the logbook is displayed and further

settings are made in the lower blue control area.

Tap on the red button to close the software application if necessary.

3.2.2 PIN authentication for operation

For configuration control operations, e.g. to block luminaires, a prompt window is

shown with a virtual numeric keypad to type in a PIN number:

The Administrator PIN and User PIN are set ex

works. The Administrator has full access rights. The

User only has limited rights, e.g. to start a function

test. The rights required for performing an operation

are shown in the PIN prompt window.

Administrator

9876 followed by OK

User

0000 followed by OK

ote:N The PIN numbers of the

Administrator and User can be changed in the

settings. See next page.

Operation of the visualisation

9Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com

GB

3.2.3 Basic software settings

Tap on the British flag button to access the settings menu of the software.

Language:

Select one of the 19 languages of

operation in the Language menu; the

language is modified without restarting

the programme.

General:

- Type in a project name of max.

80digits.

- Change the User and

Administrator PIN number.

IMPORTANT

Memorise the new PIN or write it

down.

- Change the background colour.

Operation of the visualisation

10

Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com

GB

CGLine+:

Select whether the blocking button

on the base window performs the

“Block” or “Rest mode” (for France

only) operation.

Maintained mode ON - the CGLine+

luminaires can be turned on/off if the

L terminal on the luminaire is bridged

with the L line.

3.2.4 Further functions and

display operations in the base

window

Status display of the Controller

Click on the button to open the CGLine+ Web -Controller device window. See next

page.

The Block button is used to block all connected luminaires (PIN authentication)

to prevent a complete discharge, e.g. in case of a power failure during operation

downtimes.

Close the programme (PIN authentication)

Start FT

Click on the button to start a function test of all connected self-contained

luminaires.

(User/Admin PIN authentication)

Operation of the visualisation

11Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com

GB

Ethernet

TCP / IP

CGLine+ W eb T ouchscr een Contr oller:

CGLine+ CGVision

Touchscreen G/Controller

CGLine+ Web-Controller

CGLine+ Bus

Line 1

1 2 3 200

Line 2

Line 3

Line 4

CGLine+ W eb T ouchscr een Controller

Line 1

1 2 3 200

Line 2

Line 3

Line 4

Line 1

Line 2

Line 3

Line 4

Line 1

Line 2

Line 3

Line 4

1 2 3 200

1 2 3 100

Logbook

Click on the button to display the logbook for a per iod of at least 4 years with all

events in detail.

Configuration

Not in use for this Controller

Services

Click on this button to store and load the files and logbooks.

Click on the coloured status display to open a detailed status view in Explorer style.

See next page.

3.3 CGL+ CGVision Touchscreen G/Controller

The CGL+ CGVision Touchscreen G/Controller contains the same software of S/Controller

with the additional feature, to control and monitor up to 9 external networked CGLine+

Web-Controller. For this the G/Controller contains a LAN switch for a connection to the

other networked CGLine+ controller.

Operation of the visualisation

12

Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com

To add external CGLine+ Web-Controller on the visualisation software click on

configuration:

A configuration screen appears. The first entry if the internal installed CGLine+

Web-Controller. With entering of the IP address it is possible to add up to 9

external networked CGLine+ Web-Controller.

After having clicked on ON, the software restarts.

GB

Operation of the visualisation

13Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com

GB

The main picture shows now the sum status of all controllers. With click on a button the

device picture of the Controller appears. For further instructions, please read the full

manual.

In the rest of the manual some further settings can be described, like network settings.

Centralised supervision

14

Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com

GB

4 Centralised supervision

(only for 40071361056 and 40071361084)

If the CGLine+ Touchscreen Controller must be integrated in a LAN network, the IP

addresses must be changed for both the CGLine+ Touchscreen controller and the

CGLine+ web controller.

The CGLine+ Touchscreen Controller is pre-configured with the following IP settings:

••

CGLine+ web controller: 192.168.1.200;

••

Windows 10 browser: 192.168.1.205.

4.1 Set up the ID address of the web controller

To change the address of the network settings on the web controller to desired IP set-

tings, click to the menu “Configuration”

1

, register “Network”

2

:

After configuration of the CGLine+ web controller IP settings, click to “Save” button for

the new configuration to overtake. The controller is now reachable under the new IP

settings.

1

2

Centralised supervision

15Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com

GB

4.2 Set up the IP address of the Windows tablet

The IP address of the Windows tablet needs to be redefined.

To set the IP address:

> Settings menu

> “Network & Internet”

> “Ethernet” in the left menu and then “Network and Sharing Center” in the right list

The Network and sharing Center opens up.

In the section “View your active

networks”, set the Connection to

“Ethernet”.

In the Ethernet Status window, click

on “Properties” button.

In the Ethernet Properties dialog box:

> “Internet Protocol Version 4” in the list

> “Properties”

A new window is displayed where to enter the

correct IP address and subnet mask.

Centralised supervision

16

Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com

4.3 Set up the IP address of the monitoring computer

To modify the network settings of the PC, open the control panel:

> Network and sharing center

> Right mouse click on “LAN connection”

> “Properties”

The following screen is displayed:

Mark the entry Internet protocol version 4

1

,

then continue with “Properties”

2

.

A new dialog box is displayed where to enter

the correct IP address and subnet mask.

1

2

GB

Tablet use advantages

17Quick installation manual CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com

1

2

5 Tablet use advantages

5.1 Features

As the tablet runs a Windows operating system, it can provide all usual Windows fea-

tures.

5.2 SD card

The Windows tablet can host a micro SD card.

The SD card connector is located behind the tablet.

To access the tablet’s connector, turn counterclockwise the screw

1

located on the top

of the controller’s housing and remove the front panel

2

.

If the supervision is not centralised, the SD card can be used to transfer data (ex.: build-

ing layouts) from or to the tablet.

6 Battery disposal

Electrical and electronic products should not be mixed with general household waste. For proper

treatment, recovery and recycling, please take this(these) product(s) to designated collection

points where it will be accepted free of charge.

Alternatively, in some countries you may be able to return your products to your local retailer

upon purchase of an equivalent new product.

Disposing of this product correctly will help save valuable resources and prevent any potential

negative effects on human health and the environment, which could otherwise arise from

inappropriate waste handling.

Please contact your local authority for further details of your nearest designated collection point.

Penalties may be applicable for incorrect disposal of this waste, in accordance with your

national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or

supplier for further information.

GB

Einleitung

18

Kurzanleitung CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com

1 Einleitung

Diese Installationskurzanleitung ist ein schnelles Inbetriebnahmeverfahren des

CGLine+ Web Touchscreen Controllers. Eine vollständige Installations- und

Betriebsanleitung kann von der Website des CGLine+ Web Controllers herunterge-

laden werden, siehe Seite 6 oder auf dem Desktop des Tablets.

1.1 Beschreibung

1.1.1 Eigenständiges System

CGL+ CGVision Touchscreen S/Controller 40071361083

••

Konfiguration und Visualisierung des integrierten CGLine+ Web-Controllers als

eigenständige Lösung.

Sicherheitshinweise

VORSICHT

••

Der CGLine+ Web Touchscreen

Controller muss in unbeschädigtem

und funktionalem Zustand betrieben

werden.

••

Wenn Wartungsarbeiten an dem

Gerät durchgeführt werden, muss

das Gerät von der Stromversorgung

getrennt sein.

••

Wenn Sie eine Gerätewartung

durchführen, beachten Sie die

nationalen Sicherheits- und

Unfallverhütungsbestimmungen wie

auch die Sicherheitshinweise in der

folgenden Betriebsanleitung, die mit

gekennzeichnet sind .

Normenkonformität

Entspricht: EN 62368.

Entwickelt, gefertigt und geprüft

gemäß DIN EN ISO 9001.

D

CGL+ CGVisionTouchscreen S/Controller

Strang 1

1 2 3 200

Strang 2

Strang 3

Strang 4

Die WLAN-Funktion des

eingebauten Tablet-PCs wird bei

dieser Anwendung nicht benutzt

und ist daher deaktiviert.

Eine Aktivierung dieser Funktion

bewirkt den Verlust der

Zertifizierung.

Einleitung

19

Kurzanleitung CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com

1.1.2 Zentralisierte Überwachung

CGLine+ Web Touchscreen Controller 40071361056

••

Visualisierung des integrierten CGLine+ Web Controllers und von extern

angeschlossenen CGLine+ Web Controllern über den integrierten Webbrowser

auf dem Touchscreen.

••

Eine optionale CGVision-Visualisierungssoftware ermöglicht die zentralisierte

Überwachung und Steuerung von bis zu 32 CGLine+ Web Touchscreen

Controllern oder CGLine+ Web Controllern.

D

Ethernet

TCP / IP

CGLine+ W eb Touchscreen Controller:

• Zugang zu allen Web-

Controllern über den

Webbrowser

CGLine+ Bus

CGLine+

Web Touchscreen Controller

Strang 1

1 2 3 200

Völlig zentralisierte Konguration

und Überwachung aller

CGLine+ Web Touchscreen

Controller oder CGLine+ Web-

Controller über CGVision PC.

Strang 1

Ethernet

TCP / IP

CGLine+ W eb Touchscreen Controller

CGLine+ CGVision

Touchscreen G/Controller

1 2 3 200

CGLine+ Web Touchscreen

Strang 1

1 2 3 200

Strang 1

Webbrowser

Strang 1

Op-

1 2 3 200

CGLine+ Web-Controller

CGLine+ Bus

Strang 1

1 2 3 200

Strang 2

Strang 3

Strang 4

Strang 1

Strang 2

Strang 3

Strang 4

Strang 2

Strang 3

Strang 4

Strang 2

Strang 3

Strang 4

Strang 1

Strang 2

Strang 3

Strang 4

Strang 2

Strang 3

Strang 4

CGLine+ Web-Controller

CGL+ CGVision Touchscreen G/Controller 40071361084

••

Konfiguration und Visualisierung des integrierten CGLine+ Web-Controllers und

einer Gruppe von bis zu 9 externen, über Ethernet angeschlossenen CGLine+ Web-

Controllern.

Einleitung

20

Kurzanleitung CGLine+ Web Touchscreen Controller ZNO2037700 B www.eaton.com

D

1.1.3 Funktionen

Allgemeines

••

Visualisierung von bis zu 800 CGLine+ Einzelbatterieleuchten

••

10,1 Zoll Touchscreen-Farbanzeige für einfache Handhabung des Systems

••

Automatische Leuchtensuchfunktion

••

Automatische Funktions- und Dauerprüfung für bis zu 8 frei wählbare

Prüfgruppen von CGLine+ Leuchten

••

Zwei frei programmierbare digitale Eingänge und zwei Relaisausgänge

••

Umfassende Steuerbefehle jeder auswählbaren Leuchte

••

Logbuch für einen Zeitraum von mindestens 4 Jahren

CGLine+ Web Touchscreen Controller

••

Visualisierung einer beliebigen Anzahl von externen, an das Netzwerk ang-

eschlossenen CGLine+ Web-Controllern über den integrierten Webbrowser

••

Eingebetteter Gebäudegrundriss

••

Optionaler zentraler CGVision PC ermöglicht die zentralisierte Überwachung von

bis zu 32 CGLine+ Web Touchscreen Controllern oder CGLine+ Web-Controllern

CGL+ CGVision Touchscreen S/Controller

••

Eigenständiges System für bis zu 800 unabhängige CGLine+ Leuchten

••

Volle Steuerung, Überwachung und Konfiguration jeder Leuchte über die integri-

erte CGVision Lite Visualisierungssoftware

CGL+ CGVision Touchscreen G/Controller

••

Gruppenvisualisierung von bis zu 9 externen, mit dem Netzwerk verbundenen

CGLine+ Web-Controllern

••

Volle Steuerung, Überwachung und Konfiguration jeder Leuchte über die integri-

erte CGVision Lite Visualisierungssoftware für bis zu 10 CGLine+ Controller

Seite wird geladen ...

Eaton CGLine+ Web Series Quick Installation Manual

Dieses Handbuch eignet sich auch für

Eaton CGLine+ Web Series Quick Installation Manual

in anderen Sprachen

Verwandte Artikel

Andere Dokumente