Pahlen MA55-17 Bedienungsanleitung

Marke: Pahlen

Modell: MA55-17

Typ: Bedienungsanleitung

Tel. +46 8 594 110 50, Fax +46 8 590 868 80, e-mail: [email protected], www.pahlen.com

Inloppsmunstycke

Inlet

Einlaufdüse

Форсунка

Manual

User manual

Gebrauchsanleitung

Инструкция

MA55-17 rev.2

Swedish design

and manufacture

since 1967

SVENSKA 3– 6

ENGLISH 7–10

DEUTSCH 11-14

РУССКИЙ 15–18

Inloppsmunstycke

MA55-17S

SVENSKA

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-29

both

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-29

both

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly dr awing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-29

both

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly dr awing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-29

both

Det är viktigt att denna manual läses igenom noggrant för att trygga funktion och livslängd hos utrustningen.

Pahlén AB ansvarar ej för produktgaranti eller skador som sker till följd av felaktig installation, handhavandefel eller felaktigt

underhåll.

Produktbeskrivning

Inloppsmunstycketsfunktionäratttillföraettjämtödeavvattenienswimmingpool.

Flödet ut i poolen kan riktas genom att vrida kulan åt önskat håll för att få optimal inblandning och ytvattenhastighet.

Kulannnsitvåolikautförande:typAmedenöppning(Ø26mm)ellertypBmed7småöppningar(Ø7mm).

Inloppsmunstyckennnsitvåolikadesignutförande;Marine-ellerstandardfrontochförtvåolikatyperavpool;gjutenibetong

ellerpoolmedliner.FörmontageiPP-alternativtglasberpool,seinstruktionMA55-11.

Kula typ A Kula typ B

Marine

Liner Art.nr124500 Art.nr124502

Betong Art.nr124505 Art.nr124507

Standard

Liner Art.nr125990 Art.nr125992

Betong Art.nr126090 Art.nr126092

Allmän info

Rekommenderade värden beträande vattenkvalitet:

Totalklorhalt: max3,5mg/liter(ppm)*

Klorid(salt)halt: max250mg/liter

pH-värde: 7.2–7.6

Alkalinitet: 60–120mg/liter(ppm)

Kalciumhårdhet: 100–300mg/liter(ppm)

Järn: max0,1mg/l*

Koppar: max0,2mg/l*

Mangan: max0,05mg/l*

Fosfor: max0,01mg/l*

Nitrat: max50mg/l*

Utanför dessa värden gäller ej produktgarantin

Installation allmänt

Inloppsmunstycken placeras normalt på poolens ena kortsida med bräddavlopp på den motsatta sidan. Rekommenderat djup

nnsbeskrivetisenareavsnitt.

• Iengjutenpoolkonstruktionanvändsingjutningsrör(säljsseparat).

Observera att armering inte får ligga närmare rostfritt material än minst 50 mm.

• Elektriskainstallationer>30Vfårejplacerasinom500mmavståndfrånnågotrostfrittmaterial.

• Vid montering skall rostfria verktyg med rengjorda kontaktytor användas.

• Förvaraprodukternaioriginalförpackningenändatillinstallationenförattundvikareporochäckar.

• Var aktsam vid monteringen så att inte produkten repas.

• Undvik att placera koncentrerad dosering av kemikalier intill rostfria detaljer. Skador kan uppstå vid utebliven poolcirkulation.

Vinterstängning

Vidvinterstängningavpoolendemonterasinloppsmunstycketsfront,kulaochsäte.Håletpluggasmedenvinterplugg(ingårej).

AnvändenpluggmedkoniskexpanderellerR1½”-gänga.

*EnligtEN16713-3

Tekniska data

Tryckfall (bar)

Flöde Kula typ A Kula typ B

 5m3/h 0,00 0,18

7m3/h 0,03 0,32

10m3/h 0,22 0,71

Inloppsmunstycke

MA55-17S

SVENSKA

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för betongpool

Installationsbild inlopp

M11553 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Kakelfix

Kakel

Betong

Ingjutningsrör

400

Inlopp

Sid 1(2)

400

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för betongpool

Installationsbild inlopp

M11553 0

Kakel

Kakelfix

Hus inloppsmunstycke

Kula

M5x10

(Torx)

Front

Ingjutningsrör 12640

Sid 2(2)

Fästbricka(2x)

För poolstomme av betong - klädd med kakel/mosaik

Art.nr 124505, 124507, 126090, 126092

Rådfrågaerbetong-/ytskiktsleverantöromeventuellttätskiktochappliceringsmetod.

Montera inloppsmunstycket så här:

1. Anslutenkabel(minst6mm2)fråningjutningsröretsänstillmarkjord.Användrostfriförskruvningvidanslutningen

(Ø5,5mm).

2. Fixeraingjutningsröretiformenochgjutfastdettailivmedfärdigbetongvägg(Aseskissovan).

3. Monteraväggbeklädnaden.

4. Monterainloppsmunstycketshusmedgängtätning.Tänkpåattfrontenslogotypsenareskallhamnahorisontellt.

5. Monterakulanmeddenrundadeöppningenmotpoolen,samtfrontenmedPahlén-logotypenuppåtochfästbrickorna

bakom.Fästbrickornaärtillföratthållakvarskruvenifrontenvilketunderlättarvidframtidademonteringsomt.ex

vinterstängning.

Bilden visar ett inloppmunstycke med Marine front.

Kakelx

Kakel

Betong

Ingjutningsrör

Kakel

Ingjutningsrörart.nr12640

Kakelx

Hus inloppsmunstycke

Kula

Skruv(2st)

M5x12Torx

Fästbricka(2st)

Front

Bilden visar ett inloppmunstycke med Marine front.

Rundad kant

Inloppsmunstycke

MA55-17S

SVENSKA

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för pool med duk

Installationsbild inlopp

M11551 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

400

Plywood Foam

Inlopp

Sid1 (2)

Liner

400

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för pool med duk

Installationsbild inlopp

M11551 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

400

Plywood Foam

Inlopp

Sid1 (2)

Liner

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawin g no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-31

hus o ring

30°

60°

M10401-1

Bottensugkontakt / Vacuum Point

Inloppsmunstycke / Inlet

Sugmunstycke / Outlet

Spa-belysning / Spa light

14(8x)

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för pool med duk

Installationsbild inlopp

M11551 0

Sid2 (2)

För poolstomme av trä, plåt eller plast - klädd med liner

Art.nr 124500, 124502, 125990, 125992

Bilderna visar ett inloppmun-

stycke med Marine front.

Väggmatta

Liner

Plywood

Montera inloppsmunstycket så här:

1. Gör hål i stommen enligt mall och montera inloppshuset

med bifogad skruv och mutter från insidan av poolen

(seskiss).

2. Fäst sedan den självhäftande packningen på inloppshuset.

3. Monterapooldukenochpåbörjavattenfyllning.

4. Närvattnetnårca5cmunderinloppsmunstycket,skärett

litet kryss i poolduken i centrum av hålet.

Monterapackningen(2mm)ochtätringen.

5. Renskär duken efter tätringens inre kant.

6. Monterakulanmeddenrundadeöppningenmotpoolen,

samt fronten med Pahlén-logotypen uppåt och fästbrick-

orna bakom. Fästbrickorna är till för att hålla kvar skruven i

frontenvilketunderlättarvidframtidademonteringsomt.ex

vinterstängning.

7. Fyll upp poolen med vatten till önskad nivå.

UPP

Tätring

UPP

Inloppshus

UPP

OBS! Ej skala 1:1 av

trycktekniska skäl.

Måttritning för hål

i poolvägg

Packning2mm

Väggmatta

Tätring

Fästbricka(2st)

Skruv(2st)

M5x20Torx

Kula

Front

Skruv(6st)

M5x16

Säte

Packning1,5mmsjälvhäftande

Liner

Skruv(4st)

M5x30

Poolstomme

plywood/plåt

Mutter(4st)

Bricka(4st)

Inlopps-

hus

Rundad kant

Inloppsmunstycke

MA55-17S

SVENSKA

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawin g no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-31

hus o ring

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för poolstomme av thermoblock

Installationsbild inlopp

M11554 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Sid 1(2)

min 50

400

125

Art.no.

Rev.no.

Scale

Approved by:

Revised by: Date

Drawn by: Date

Drawing number

TS 2011-11-02

M11552 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

400

125

Sid 1(2)

400

125

Art.no.

Rev.no.

Scale

Approved by:

Revised by: Date

Drawn by: Date

Drawing number

TS 2011-11-02

M11552 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

400

125

Sid 1(2)

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för poolstomme av thermoblock

Installationsbild inlopp

M11554 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Sid 1(2)

min 50

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för poolstomme av mursten

Installationsbild inlopp

M11552 0

Ingjutningsrör 12670 Bronshus

Foam

Packning 1,5mm (självhäftande)

Liner

Packning 2mm

Tätring

M5x16 (6x)

Säte för kula

Kula

Front

M5x20 (2x)

Torx

Sid 2(2)

Fästbricka(2x)

UPP

Tätring

UPP

Inloppshus

För poolstomme av mursten

- klädd med liner

Art.nr 124500, 124502, 125990, 125992

För poolstomme av isolerblock

- klädd med liner

Art.nr 124500, 124502, 125990, 125992

Montera inloppsmunstycket så här:

1. Monterainloppshusetpåingjutningsrörets.

Använd lämplig gängtätning.

2. Anslutenkabel(minst6mm2)fråningjutningsröretsänstill

markjord. Använd rostfri förskruvning vid anslutningen

(Ø5,5mm).

3. Fixeraingjutningsröretochgjutfastdettaistommen:

Mursten:Inloppshusetsänsskavilamotfärdigputsad

poolvägg(seAskissovan).

Isolerblock:Inloppshusetsänsskavilamotisolerblockstommen

(seBskissovan).

4. Fäst den självhäftande packningen på inloppshuset.

5. Monterapooldukenochpåbörjavattenfyllning.

6. Närvattnetnårca5cmunderinloppsmunstycket,skärettlitet

kryss i poolduken i centrum av hålet.

Monterapackning(2mm)ochtätringen.

7. Renskär duken efter tätringens inre kant.

8. Monterakulsätetochkulanmeddenrundadeöppningenmot

poolen, samt fronten med Pahlén-logotypen uppåt och fäst-

brickorna bakom. Fästbrickorna är till för att hålla kvar skruven

ifrontenvilketunderlättarvidframtidademonteringsomt.exvinterstängning.

9. Fyll upp poolen med vatten till dess önskade nivå.

Bilderna visar ett inloppmunstycke med Marine front.

Packning2mm

Väggmatta

Tätring

Fästbricka(2st)

Skruv(2st)

M5x20Torx

Kula

Front

Skruv(6st)

M5x16

Säte

Packning1,5mmsjälvhäftande

Ingjutningsrör

Inlopps-

hus

Liner

Väggmatta

Liner

Puts

Mursten

Ingjutnings-

rör

Vägg-

matta

Liner

Thermopoolstomme

Ingjut-

ningsrör

Armerings-

järn Betong

Rundad kant

Inlet

MA55-17E

ENGLISH

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-29

both

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-29

both

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly dr awing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-29

both

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly dr awing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-29

both

It is important to read this manual thoroughly in order to ensure functioning and long service life of the equipment.

PahlénABisnotresponsiblefortheproductwarrantyincaseofanydamageduetoimproperinstallation,mishandlingor

improper maintenance

Product description

Theinletnozzleisintendedtosupplyasteadyowofwaterintotheswimmingpool.

Thepooloutowcanbedirectedbyturningtheballinthedesireddirectionforoptimalmixingandsurfaceowspeed.

Theballisavailableintwodierentversions:typeAwithanopening(Ø26mm)ortypeBwith7smallopenings(Ø7mm).

Theinletnozzlesareavailableintwodierentcongurations-withMarinefrontorwithStandardfront-fortwodierenttypesof

swimmingpool;castconcreteorwithapoolliner.ForinstallationofPP-analternativeberglasspool,seeinstructionMA55-11.

Ball type A Ball type B

Marine

Liner ItemNo124500 ItemNo124502

Concrete ItemNo124505 ItemNo124507

Standard

Liner ItemNo125990 ItemNo125992

Concrete ItemNo126090 ItemNo126092

General information

Recommended values for water quality:

Totalchlorinecontent: max3.5mg/liter(ppm)*

Chloride(salt)content: max250mg/liter

pH-value:  7.2–7.6

Alkalinity:  60–120mg/liter(ppm)

Calciumhardness:  100–300mg/liter(ppm)

Iron:  max0.1mg/l*

Copper:  max0.2mg/l*

Manganese:  max0.05mg/l*

Phosphorus:  max0.01mg/l*

Nitrate:  max50mg/l*

Outside these values the product warranty does not apply.

Installation allmänt

Theinletnozzlesaretypicallyplacedononeshortsideofthepoolwithanoverowattheoppositeside.Recommendeddepth

is described in the subsequent sections.

• Inacastconcretepoolinletpipeshouldbeused(soldseparately).

Please note that ttings must not be closer to stainless steel materials than at least 50 mm.

• Electricalinstallations>30Vmustnotbeplacedwithin500mdistancefromanystainlesssteelmaterial.

• Duringinstallationworks,stainlesssteeltoolswithcleancontactsurfacesshouldbeused.

• In order to avoid scratches and stains, keep articles in their original packaging until installation.

• Be careful during installation, so as not to scratch the article.

• Avoidplacingconcentratedchemicaldosagesnexttostainlesssteeldetails.Damagecanoccurincaseofnopoolcirculation.

Winter storage

Forthepoolwinterstorage,theinletnozzlefront,ballandseatshouldbedismantled.Theholeshouldbepluggedwithawinter

plug(notincluded).UseaplugwithaconicalexpanderorthreadR1½”.

*CompliestoEN16713-3

Technical data

Pressure drop (bar)

Flow Ball type A Ball type B

 5m3/h 0,00 0,18

7m3/h 0,03 0,32

10m3/h 0,22 0,71

Inlet

MA55-17E

ENGLISH

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för betongpool

Installationsbild inlopp

M11553 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Kakelfix

Kakel

Betong

Ingjutningsrör

400

Inlopp

Sid 1(2)

400

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för betongpool

Installationsbild inlopp

M11553 0

Kakel

Kakelfix

Hus inloppsmunstycke

Kula

M5x10

(Torx)

Front

Ingjutningsrör 12640

Sid 2(2)

Fästbricka(2x)

For the pool frame of concrete - covered with tile / mosaic

Item No 124505, 124507, 126090, 126092

Consultyourconcrete/waterproongsupplierforanywaterproongandapplicationmethod.

Install inlet nozzle like this:

1. Connectthecable(min.6mm2)fromtheinletpipeangestoearth.Usestainlesssteelscrewsforconnection(Ø5.5mm).

2. Fixtheinletpipeinitsshapeformandgroutitinwithaconcretewallnish(Seethediagramabove).

3. Installwallnishing.

4. Installinletnozzlehousingwithathreadsealant.Rememberthatfrontlogoshouldbehorizontaleventually.

5. InstalltheballwitharoundopeningtowardsthepoolandthefrontwithaPahlénlogoontop,andattachthetilesontheback

side.Attachthewashersthataredesignedtoholdthescrewinthefront,thiswillfacilitatethefuturedisassembly,e.g.for

winterstorage.

The picture shows an inlet nozzle with Marine front

Tile adhesive

Tile

Concrete

Non leak

ange

Tile

Nonleakange

itemno12640

Tile adhesive

Inlet housing

Ball

Screw(2pcs)

M5x12Torx

Fixingwasher(2pcs)

Front

The picture shows an inlet nozzle with Marine front.

Rounded edge

Inlet

MA55-17E

ENGLISH

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för pool med duk

Installationsbild inlopp

M11551 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

400

Plywood Foam

Inlopp

Sid1 (2)

Liner

400

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för pool med duk

Installationsbild inlopp

M11551 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

400

Plywood Foam

Inlopp

Sid1 (2)

Liner

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawin g no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-31

hus o ring

30°

60°

M10401-1

Bottensugkontakt / Vacuum Point

Inloppsmunstycke / Inlet

Sugmunstycke / Outlet

Spa-belysning / Spa light

14(8x)

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för pool med duk

Installationsbild inlopp

M11551 0

Sid2 (2)

For the pool framework made of wood, metal or plastic - nished with liner

Item No 124500, 124502, 125990, 125992 Wall mat

Liner

Plywood

Install the inlet nozzle like this:

1. Makeaholeintheframeaccordingtothetemplateand

mounttheinlethousingwiththeenclosedscrewsandnuts

fromthepoolinside(seethediagram).

2. Then attach the self-adhesive packing to the inlet housing.

3. Installthepoolcanvasandbeginooding.

4. Whenthewaterisabout5cmbelowtheinletnozzlecuta

small cross in the liner at the hole center.

Install the packing and sealing.

5. Trimthelinerbelowthesealinginsideedge.

6. Installtheballwitharoundopeningtowardsthepoolandthe

frontpartwithPahlénlogoontop,andthexingwashers-

towardsthebackside.Fixingwashersshouldholdscrewin

thefront,thisfacilitatesthefuturedisassembly,e.g.forwinter

storage.

7. Fillthepoolwithwatertothedesiredlevel.

Sealing ring

Inlet housing

NOTE! Not 1:1 scale

for technical reasons

Dimension drawing

for holes in pool wall

Packing2mm

Wall mat

Sealing ring

Fixingwasher(2pcs)

Screw(2pcs)

M5x20Torx

Ball

Front

Screw(6pcs)

M5x16

Seat for ball

Packing1.5mmself-adhesive

Liner

Screw(4pcs)

M5x30

Pool frame

plywood/sheet

Nut(4pcs)

Washer(4pcs)

Inlet

housing

The picture shows an inlet nozzle

with Marine front .

Rounded edge

Inlet

MA55-17E

ENGLISH

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawin g no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-31

hus o ring

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för poolstomme av thermoblock

Installationsbild inlopp

M11554 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Sid 1(2)

min 50

400

125

Art.no.

Rev.no.

Scale

Approved by:

Revised by: Date

Drawn by: Date

Drawing number

TS 2011-11-02

M11552 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

400

125

Sid 1(2)

400

125

Art.no.

Rev.no.

Scale

Approved by:

Revised by: Date

Drawn by: Date

Drawing number

TS 2011-11-02

M11552 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

400

125

Sid 1(2)

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för poolstomme av thermoblock

Installationsbild inlopp

M11554 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Sid 1(2)

min 50

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för poolstomme av mursten

Installationsbild inlopp

M11552 0

Ingjutningsrör 12670 Bronshus

Foam

Packning 1,5mm (självhäftande)

Liner

Packning 2mm

Tätring

M5x16 (6x)

Säte för kula

Kula

Front

M5x20 (2x)

Torx

Sid 2(2)

Fästbricka(2x)

Sealing ring

Inlet housing

For the pool frame made of building blocks

- nished with liner

Item No 124500, 124502, 125990, 125992

For the pool frame made of insulating blocks

- nished with liner

Item No 124500, 124502, 125990, 125992

Install inlet nozzle like this:

1. Install inlet housing on the inlet pipes.

Use appropriate thread sealant .

2. Connectthecable(min.6mm2)frompottingpipeangeto

earth.Usestainlesssteelscrewattheconnection(Ø5.5mm).

3. Fixtheinletpipeandgroutitintotheframe:

Building blocks:Theinlethousingangeshouldrestonthe

plasteredpoolwall(seediagramAabove).

Isolating block:Theinlethousingangeshouldrestonthe

plasteredpoolwall(seediagramBabove).

4. Fixselfadhesivepackingtotheinlethousing.

5. Installthepoolcanvasandbeginooding.

6. Whenwaterisaround5cmbelowtheinletnozzlecutasmall

cross in the pool canvas at the hole center.

Installthepacking(2mm)andsealing.

7. Trimthelinerbelowthesealinginsideedge.

8. Installtheballseatwiththeroundopeningtowardsthepool

andthefrontpartwithPahlénlogoontop,andthexing

washersonthebackside.Fixingwashersshouldholdscrews

inthefrontpart,whichfacilitatesfuturedisassembly,

e.g.forwinterstorage.

9. Fillthepoolwithwatertothedesiredlevel.

The pictures show an inlet nozzle with Marine front

Packing2mm

Wall mat

Sealing ring

Fixingwahser(2pcs)

Screw(2pcs)

M5x20Torx

Ball

Front

Screw

(6pcs)

M5x16

Seat for ball

Packing1.5mmselfadhesive

Nonleakange Inlet housing

Liner

Wall mat

Liner

Grout

Building blocks

Non leak

ange

Wall

mat

Liner

Thermopoolwall

Non leak

ange

Reinforce-

ment bars

Concrete

Rounded edge

Einlaufdüsen

MA55-17T

DEUTSCH

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-29

both

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-29

both

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly dr awing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-29

both

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly dr awing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-29

both

Esistwichtig,diesesHandbuchgründlichzulesen,umFunktionsfähigkeitundlangeBetriebsdauerdiesesGeräteszu

gewährleisten.

PahlénABkannkeineProduktgarantiebeiSchädenwegenunsachgemäßerInstallation,Missbrauchodernichtordnungs-

gemäßerWartungübernehmen.

Produktbeschreibung

DieEinlaufdüsesolleinenunveränderlichenWasserussinsSchwimmbeckengewährleisten.

DerSchwimmbeckenabusskannmithilfedesKugelkopfsindiegewünschteRichtungfüroptimaleMisch-undOberächen-

Fließgeschwindigkeitgedrehtwerden.

DerKugelkopfistinzweiverschiedenenVersionenerhältlich:TypAmiteinerÖnung(Ø26mm)oderTypBmit7kleinen

Önungen(Ø7mm).DieEinlaufdüsensindinzweiverschiedenenKongurationenerhältlich-mitMarineroderStandard-

Vorderseite-fürzweiverschiedeneSchwimmbeckentypen;GussbetonodermitBeckenfolie.

FürdiePPInstallation-einalternativesglasfaserverstärktesSchwimmbecken,sieheAnleitungMA55-11.

Kugelkopftyp A Kugelkopftyp B

Marine

Beckenfolie Art.Nr124500 Art.Nr124502

Beton Art.Nr124505 Art.Nr124507

Standard

Beckenfolie Art.Nr125990 Art.Nr125992

Beton Art.Nr126090 Art.Nr126092

Allgemeine Informationen

Empfohlene Werte für die Wasserqualität:

*KonformmitEN16713-3

Technische Daten

Druckabfall (Bar)

Durch-

uss

Kugelkopf-

typ A

Kugelkopf-

typ B

 5m3/h 0,00 0,18

7m3/h 0,03 0,32

10m3/h 0,22 0,71

GesamterChlor-Gehalt: max3.5mg/Liter(ppm)*

Chlor(Salz)-Gehalt: max250mg/Liter

pH-Wert:  7.2–7.6

Alkalität:  60–120mg/Liter(ppm)

Kalziumhärte:  100–300mg/Liter(ppm)

Eisen: max0.1mg/l*

Kupfer: max0.2mg/l*

Mangan: max0.05mg/l*

Phosphor: max0.01mg/l*

Nitrat: max50mg/l*

Außerhalb dieser Werte kann die Produktgarantie nicht übernommen werden.

Allgemeine Installation

ImAllgemeinenwerdendieEinlaufdüsenaufeinerkurzenSeitedesSchwimmbeckensmiteinemÜberlaufaufderGegenseite

montiert.DieempfohleneTiefewirdindennachfolgendenAbschnittenbeschrieben.

• IneinemBeckenausGussbetonsollteeinEinlaufrohrverwendetwerden(separatverkauft).

Bitte beachten Sie, dass die Anschlüsse nicht näher als mindestens 50 mm an den Edelstahl-Materialien verlegt

werden dürfen.

• Elektroinstallation>30VdarfsichnichtinnerhalbeinesBereichesvon500mzuEdelstahl-Materialienbenden.

• WährendInstallationsarbeitensolltenEdelstahlwerkzeugemitsauberenKontaktächenverwendetwerden.

• UmKratzerundFleckezuvermeiden,lassenSiedenArtikelbiszurInstallationinseinerOriginalverpackung.

• SeienSiewährendderInstallationvorsichtig,umdenArtikelnichtzuzerkratzen.

• Vermeiden Sie, konzentrierte Chemikaliendosierungen neben Edelstahl zu platzieren. Schäden können im Falle mangelnder

Beckenwasserumwälzungauftreten.

Winterlagerung

FürdieÜberwinterungdesBeckenssolltendieVorderseitederEinlaufdüse,KugelkopfundAufnahmedemontiertwerden.

DieÖnungsolltemiteinemWinterstopfengeschlossenwerden(nichtbeigefügt).VerwendenSieeinenStopfenmiteinem

konischenExpanderoderGewindeR1½”.

Einlaufdüsen

MA55-17T

DEUTSCH

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för betongpool

Installationsbild inlopp

M11553 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Kakelfix

Kakel

Betong

Ingjutningsrör

400

Inlopp

Sid 1(2)

400

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för betongpool

Installationsbild inlopp

M11553 0

Kakel

Kakelfix

Hus inloppsmunstycke

Kula

M5x10

(Torx)

Front

Ingjutningsrör 12640

Sid 2(2)

Fästbricka(2x)

Für Beckenrahmen aus Beton - geiest / mit Mosaik

Art.Nr 124505, 124507, 126090, 126092

BefragenSieIhrenLieferantenfürBeton/fürAbdichtungenüberAbdichtungenundAnwendungsmethoden.

Installieren Sie die Einlaufdüse wie folgt:

1. SchließenSiedasKabel(min.6mm2)vondenFlanschendesEinlaufrohrsandieErdung/Massean.VerwendenSieEdels-

tahlschraubenfürdenAnschluss(Ø5,5mm).

2. BefestigenSiedasEinlaufrohrinseineFormgebungundverschmierenSieesmiteinemBetonwandputz(SieheDiagrammoben).

3. Tragen Sie den Wandputz auf.

4. InstallierenSiedasGehäusederEinlaufdüsemiteinerGewindedichtung.DenkenSiedaran,dassvordereLogohorizontal

sein sollte.

5. InstallierenSiedenKugelkopfmitrunderÖnungzumBeckenunddieVorderseitemitdemPahlén-Logoobenundbefestigen

SiedieFliesenaufderRückseite.BefestigenSiedieUnterlegscheiben,diezumHaltenderSchraubeaufderVorderseite

konzipiertwurde,umzukünftigeDemontagezuerleichtern,z.B.fürWinterlagerung.

Das Bild zeigt eine Einlaufdüse mit Mariner Vorderseite.

Fliesenkleber

Fliesen

Beton

Dichtansch

Fliesen

DichtanschArt.Nr.12640

Fliesenkleber

GehäusederEinlaufdüse

Kugelkopf

Schraube

(2St)

M5x12Torx

Befestigungsscheibe(2St)

Frontstück

Das Bild zeigt eine Einlaufdüse mit Mariner Vorderseite.

Abgerundeter Rand

Einlaufdüsen

MA55-17T

DEUTSCH

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för pool med duk

Installationsbild inlopp

M11551 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

400

Plywood Foam

Inlopp

Sid1 (2)

Liner

400

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för pool med duk

Installationsbild inlopp

M11551 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

400

Plywood Foam

Inlopp

Sid1 (2)

Liner

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawin g no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-31

hus o ring

30°

60°

M10401-1

Bottensugkontakt / Vacuum Point

Inloppsmunstycke / Inlet

Sugmunstycke / Outlet

Spa-belysning / Spa light

14(8x)

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för pool med duk

Installationsbild inlopp

M11551 0

Sid2 (2)

Für den Beckenrahmen aus Holz, Metall oder Kunststo - mit Folie verkleidet

Art.Nr 124500, 124502, 125990, 125992 Wandbekleidung

Beckenfolie

Sperrholz

Installieren Sie die Einlaufdüse wie folgt:

1. MachenSieanhandderVorlageeinLochindenRahmenund

montieren Sie das Einlaufgehäuse mit den beiliegenden Schrauben

undMutternvomInnerendesBeckens(sieheDiagramm).

2. Befestigen Sie danach die selbstklebende Dichtpackung an das

Einlaufgehäuse.

3. Installieren Sie die Beckenverkleidung und beginnen Sie mit dem

Einfüllen.

4. WenndasWasserungefähr5cmunterderEinlaufdüseist,

schneiden Sie ein kleines Kreuz in die Folie in der Lochmitte.

Bringen Sie die Dichtpackung und Abdichtung an.

5. Stutzen Sie die Folie unterhalb der Abdichtung und innerhalb des

Randes zurecht.

6. InstallierenSiedenKugelkopfmitrunderÖnungzumBeckenunddie

Vorderseite mit dem Pahlén-Logo oben und die Befestigungsscheiben

zurRückseite.DieBefestigungsscheibensolltendieSchraubeaufder

Vorderseitehalten,umzukünftigeDemontagezuerleichtern,z.B.für

Winterlagerung.

7. FüllenSiedasBeckenmitWasserbiszumgewünschtenFüllstand.

OBEN

Abdichtung

OBEN

Einlaufgehäuse

OBEN

HINWEIS! Aus technischen

Gründen bitte keinen Maß-

stab 1:1 verwenden

Abmessungen

der Löcher in der

Beckenwand

Abdichtung2mm

Wandbekleidung

Dichtungsring

Befestigungsscheibe(2St)

Schraube(2St)

M5x20Torx

Kugelkopf

Frontstück

Schraube

(6St)

M5x16

Kugelsitz

Abdichtung1,5mmselbstklebend

Becken-

folie

Schraube(4St)

M5x30

BeckenrahmenSperrholz/Blech

MutterM5

(4St)

Unterlegscheibe

(4St)

Einlauf-

gehäuse

Das Bild zeigt eine Einlaufdüse

mit Mariner Vorderseite.

Abgerundeter Rand

Einlaufdüsen

MA55-17T

DEUTSCH

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawin g no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-31

hus o ring

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för poolstomme av thermoblock

Installationsbild inlopp

M11554 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Sid 1(2)

min 50

400

125

Art.no.

Rev.no.

Scale

Approved by:

Revised by: Date

Drawn by: Date

Drawing number

TS 2011-11-02

M11552 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

400

125

Sid 1(2)

400

125

Art.no.

Rev.no.

Scale

Approved by:

Revised by: Date

Drawn by: Date

Drawing number

TS 2011-11-02

M11552 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

400

125

Sid 1(2)

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för poolstomme av thermoblock

Installationsbild inlopp

M11554 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Sid 1(2)

min 50

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för poolstomme av mursten

Installationsbild inlopp

M11552 0

Ingjutningsrör 12670 Bronshus

Foam

Packning 1,5mm (självhäftande)

Liner

Packning 2mm

Tätring

M5x16 (6x)

Säte för kula

Kula

Front

M5x20 (2x)

Torx

Sid 2(2)

Fästbricka(2x)

OBEN

Dichtungsring

OBEN

Einlaufgehäuse

Für Beckenrahmen aus Bausteine -

mit Folie verkleidet

Art.Nr 124500, 124502, 125990, 125992

Für Beckenrahmen aus Isoliersteine

- mit Folie verkleidet

Art.Nr 124500, 124502, 125990, 125992

Installieren Sie die Einlaufdüse wie folgt:

1. Installieren Sie das Einlaufgehäuse auf das Einlaufrohr.

VerwendenSieeinegeeigneteGewindedichtung.

2. SchließenSiedasKabel(min.6mm2)vomFlanschdesVer-

gussrohrsandieErdung/Massean.VerwendenSieEdelstahl-

schraubenfürdenAnschluss(Ø5,5mm).

3. Befestigen Sie das Einlaufrohr und verfugen Sie es in den

Rahmen:Ziegelsteine:DerFlanschdesEinlaufgehäusessollte

aufderverputztenBeckenwandauiegen

(sieheDiagrammAoben)

Isoliersteine:DerFlanschdesEinlaufgehäusessollteaufder

verputztenBeckenwandauiegen(sieheDiagrammBoben).

4. Befestigen Sie die selbstklebende Dichtpackung an das Einlauf-

gehäuse.

5. Installieren Sie die Beckenverkleidung und beginnen Sie mit

demEinfüllen.

6. WenndasWasserungefähr5cmunterderEinlaufdüseist,

schneiden Sie ein kleines Kreuz in die Beckenverkleidung in

derLochmitte.BringenSiedieDichtpackung(2mm)undAbdich-

tung an.

7. Stutzen Sie die Folie unterhalb der Abdichtung und innerhalb

des Randes zurecht.

8. InstallierenSiedieAufnahmefürdemKugelkopfmitrunderÖnungzumBeckenunddieVorderseitemitdemPahlén-Logo

obenunddieBefestigungsscheibenzurRückseite.DieBefestigungsscheibensolltendieSchraubenaufderVorderseite

halten,umzukünftigeDemontagezuerleichtern,z.B.fürWinterlagerung.

9. FüllenSiedasBeckenmitWasserbiszumgewünschtenFüllstand.

Das Bild zeigt eine Einlaufdüse mit Mariner Vorderseite.

Wandbekleidung

Liner

Grout

Bausteine

Dicht-

ansch

Wandbe-

kleidung

Becken-

folie

Thermopool-Wand

Dicht-

ansch

Bewehrungs-

stab

Beton

Dichtung2mm

Wandbekleidung

Dichtungsring

Befestigungsscheibe(2St)

Schraube(2St)

M5x20Torx

Kugelkopf

Frontstück

Schraube

(6St)

M5x16

Kugelsitz

SelbstklebendDichtung1.5mm

Dichtansch

Inlopps-

hus

Beckenfolie

Abgerundeter Rand

Форсунка

MA55-17R

РУССКИЙ

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-29

both

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-29

both

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly dr awing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-29

both

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly dr awing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-29

both

Дляобеспечениянормальногофункционированияидлительногосрокаслужбыданногоустройстванеобходимо

внимательнопрочитатьданноеруководствосначалаидоконца.

PahlénABненесетответственностизаповреждения,вызванныенеправильнойустановкойизделия,неправильным

обращениемснимилиегонеправильнымобслуживанием,иусловиягарантиинанихнераспространяются.

Описание изделия

Даннаяфорсункапредназначенадляподачипостоянногопотокаводывплавательныйбассейн.

Дляоптимизацииперемешиванияискоростиводынаповерхностинаправлениепотокаможноизменять,поворачивая

шарвнужномнаправлении.Такойшарвыпускаетсявдвухвариантах:типAсоднимотверстиемØ26ммитипBс

семьюмаленькимиотверстиямиØ7мм.Самафорсункатожевыпускаетсявдвухразныхконфигурациях(передняя

накладка

MarineилиStandard)идлядвухразныхтиповбассейнов-спленкой(лайнером)илисоблицовкой.Относительно

установкивбассейныизполипропиленаилистекловолокна–см.инструкциюMA55-11.

Шар типа A Шар типа B

Marine

Пленка

(лайнер) Арт.№124500 Арт.№124502

Бетонс

плиткой Арт.№124505 Арт.№124507

Standard

Пленка

(лайнер) Арт.№125990 Арт.№125992

Бетонс

плиткой Арт.№126090 Арт.№126092

Общая информация

Рекомендуемые параметры качества воды:

Общеесодержаниехлора: неболее3.5мг/л(ppm)*

Содержаниесолей-хлоридов: неболее250мг/л

ЗначениерН   7.2–7.6

Щелочность:   60–120мг/л(ppm)

Кальциеваяжесткость:  100–300мг/л(ppm)

Железо:   неболее0.1мг/л*

Медь:   неболее0.2мг/л*

Марганец:   неболее0.05мг/л*

Фосфор:   неболее0.01мг/л*

Нитраты:   неболее50мг/л*

Если вода не соответствует этим ограничениям, действие гарантии прекращается

Установка - Общая информация

Обычнофорсункиразмещаютсянаоднойизкороткихсторонбассейна,противоположнойстороне,гденаходится

переливнаятруба.Рекомендуемаяглубина–см.вследующемразделе.

• Влитыхбассейнахиспользуетсявпускнаятруба(продаетсяотдельно).

Следует отметить, что арматура не должна размещаться ближе, чем на 50 мм к нержавеющему материалу.

• Электрическиеустройстваснапряжениемвыше30Внедолжныразмещатьсяближечемна500ммотлюбого

элементаизнержавеющегоматериала.

• Примонтажеследуетиспользоватьинструментыизнержавеющейсталисчистымиконтактнымиповерхностями.

• Хранитеизделияворигинальнойупаковкевплотьдоустановки,чтобыизбежатьпоявлениянанихцарапинипятен.

• Примонтажебудьтеосторожны,чтобынепоцарапатьизделие.

• Неразмещайтеконцентрированныехимикатырядомсдеталямиизнержавеющейстали.Иначеприпрекращении

циркуляциивбассейнемогутвозникнутьповреждения.

Закрытие на зиму

Призакрытиибассейнаназимунеобходимодемонтироватьпереднююнакладкуфорсунки,шариседло.Отверстие

закрываетсязимнейзаглушкой(невходитвкомплектпоставки).

ИспользуйтепробкусконическимрасширениемилисрезьбойR1½”.

*Соотв.документуEN16713-3

Технические характеристики

Гидравлическое сопротивление (бар)

Расход Шар типа A Шар типа B

 5м3/ч 0,00 0,18

 7м3/ч 0,03 0,32

10м3/ч 0,22 0,71

Форсунка

MA55-17R

РУССКИЙ

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för betongpool

Installationsbild inlopp

M11553 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Kakelfix

Kakel

Betong

Ingjutningsrör

400

Inlopp

Sid 1(2)

400

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för betongpool

Installationsbild inlopp

M11553 0

Kakel

Kakelfix

Hus inloppsmunstycke

Kula

M5x10

(Torx)

Front

Ingjutningsrör 12640

Sid 2(2)

Fästbricka(2x)

Для бассейна из бетона – облицовка кафельной плиткой/мозаикой

Арт. № 124505, 124507, 126090, 126092

Относительновозможнойукладкиизолирующегослояиметодовработыобратитеськпоставщикубетона/покрытия.

Форсунка устанавливается следующим образом:

1. Подключитепровод(сечениемнеменее6мм2)отфланцавпускнойтрубыкзаземлению.Дляподключения

используйтерезьбовоесоединениеизнержавеющегоматериала(Ø5,5мм).

2. Закрепитевпускнуютрубувформеизалейтееевровеньсготовойбетоннойстенкой(см.эскизАвыше).

3. Выполнитеоблицовкустены.

4. Установитекорпусфорсунки,используягерметикдлярезьбы.Помните,чтопереднийлоготипвконечномитоге

долженрасполагатьсягоризонтально.

5. Установитешаркруглымотверстиемкбассейну,апереднююнакладкулоготипомPahlénвверхипластмассовыми

шайбамипластинаминазад.Пластмассовыешайбыпредназначеныдляудержаниявинтоввлицевойнакладке,,что

облегчаетпоследующийдемонтаж,например,призакрытииназиму.

На рисунке показана форсунка с передней накладкой Marine.

Клейдляплитки

Плитка

Бетон

Впускная

труба

Плитка

Впускнаятруба,Арт.№12640

Клейдляплитки

Корпус

Шаровой

Винты(2шт.)

M5x12Torx

Пластмассовыешайбы

(2шт.)

Лицеваянакладка

На рисунке показана форсунка с лицевой накладкой Marine.

Скругленныйкрай

Форсунка

MA55-17R

РУССКИЙ

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för pool med duk

Installationsbild inlopp

M11551 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

400

Plywood Foam

Inlopp

Sid1 (2)

Liner

400

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för pool med duk

Installationsbild inlopp

M11551 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

400

Plywood Foam

Inlopp

Sid1 (2)

Liner

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawin g no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-31

hus o ring

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för pool med duk

Installationsbild inlopp

M11551 0

Sid2 (2)

30°

60°

M10401-1

Bottensugkontakt / Vacuum Point

Inloppsmunstycke / Inlet

Sugmunstycke / Outlet

Spa-belysning / Spa light

14(8x)

Основной корпус бассейна из дерева, металла или пластика – с пленкой (лайнером)

Арт. № 124500, 124502, 125990, 125992 Настенная

прокладка

Лайнер

Фанера

Инструкция по монтажу:

1. Сделайтеотверстиевосновномкорпусебассейнав

соответствиисшаблономизакрепитевходнойкорпусс

помощьюприлагаемоговинтаигайкисвнутреннейстороны

бассейна(см.рисунок).

2. Затемзакрепитенакорпусефорсункисамоклеящееся

уплотнение.

3. Закрепителайнериначинайтезаполнениебассейна.

4. Когдауровеньводыбудетпримернона5смнижефорсунки,

прорежьтенебольшойкрестиквлайнерепоцентруотверстия.

Установитеуплотнения(2мм)иуплотнительноекольцо.

5. Обрежьтелайнерповнутреннемукраюуплотнения.

6. Установитешаркруглымотверстиемкбассейну,алицевую

накладкулоготипомPahlénвверхикрепежнымипластинаминазад.

Пластмассовыешайбыпредназначеныдляудержаниявинтовв

переднейнакладке,чтооблегчаетпоследующийдемонтаж,

например,приконсервацииназиму.

7. Заполнитебассейнводойдонужногоуровня.

ВВЕРХ

Уплотнительное

кольцо

ВВЕРХ

Входнойкорпус

ВВЕРХ

ВНИМАНИЕ! (для

наглядности – не в

масштабе 1:1).

Чертеж с размерами

для отверстия в

стенке бассейна

Уплотнение2мм

Настеннаяпрокладка

Уплотнительноекольцо

Пластмассовыешайбы(2шт.)

Винты(2шт.)

M5x20Torx

Шаровой

Передняянакладка

Винты(6шт.)

M5x16

Передняя

Уплотнение1.5ммсамоклеящееся

Лайнер

Винты(4шт.)

M5x30

Основнойкорпусбассейна

фанера/металл

Винты

(4шт.)

Шайбы(4шт.)

Входной

корпус

На рисунке показана форсунка с лицевой накладкой Marine.

Скругленныйкрай

Форсунка

MA55-17R

РУССКИЙ

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawin g no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

ASA 2016-03-31

hus o ring

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för poolstomme av thermoblock

Installationsbild inlopp

M11554 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Sid 1(2)

min 50

400

125

Art.no.

Rev.no.

Scale

Approved by:

Revised by: Date

Drawn by: Date

Drawing number

TS 2011-11-02

M11552 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

400

125

Sid 1(2)

400

125

Art.no.

Rev.no.

Scale

Approved by:

Revised by: Date

Drawn by: Date

Drawing number

TS 2011-11-02

M11552 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

400

125

Sid 1(2)

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för poolstomme av thermoblock

Installationsbild inlopp

M11554 0

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Sid 1(2)

min 50

This document and its contents are the exclusive

property of Pahléns and may not be copied,

reproduced, transmitted or communicated to a third

party, or used for any purpose without written permission.

Art.no.

Rev.no.

Scale

Revised by: Date

Drawn by: Date

Drawing number

Assembly drawing no.

Surface treatment

part of ISO 2768-1

The tolerance class in accordance with this

Box 728, SE-194 27 Upplands Väsby, Sweden

Phone +46 8 59411050, Fax +46 8 59086880

TS 2011-11-02

för poolstomme av mursten

Installationsbild inlopp

M11552 0

Ingjutningsrör 12670 Bronshus

Foam

Packning 1,5mm (självhäftande)

Liner

Packning 2mm

Tätring

M5x16 (6x)

Säte för kula

Kula

Front

M5x20 (2x)

Torx

Sid 2(2)

Fästbricka(2x)

ВВЕРХ

Уплотнительное

кольцо

ВВЕРХ

Входнойкорпус

Корпус бассейна из каменной кладки

- с облицовкой

Арт. № 124500, 124502, 125990, 125992

Корпус бассейна из изолирующих блоков

- с облицовкой

Арт. № 124500, 124502, 125990, 125992

Форсунка устанавливается следующим образом:

1. Установитевходнойкорпуснавпускнуютрубу.

Используйтеподходящийгерметикдлярезьбы.

2. Подключитепровод(сечениемнеменее6мм2)отфланца

впускнойтрубыкзаземлению.Дляподключения

используйтерезьбовоесоединениеизнержавеющего

материала(Ø5,5мм).

3. Закрепитевпускнуютрубуизалейтееевкорпус:

Каменнаякладка:Фланецвпускнойтрубыдолженопираться

наоштукатуреннуюстенкубассейна(см.эскизАвыше).

Изоляционныйблок:Фланецвпускнойтрубыдолжен

опиратьсянакорпусбассейнаизизоляционныхблоков

(см.эскизBвыше).

4. Затемприкрепитенавходнойкорпуссамоклеющееся

уплотнение.

5. Закрепителайнериначинайтезаполнениебассейна.

6. Когдауровеньводыбудетпримернона5смнижефорсунки,

прорежьтенебольшойкрестиклайнерепоцентруотверстия.

Установитеуплотнение(2мм)иуплотнительноекольцо.

7. Обрежьтетканьповнутреннемукраюуплотнения.

8. Установитешаркруглымотверстиемкбассейну,апереднююнакладкулоготипомPahlénвверхипластмассовыми

шайбаминазад.Пластмассовыешайбыпредназначеныдляудержаниявинтоввпереднейнакладке,

чтооблегчаетпоследующийдемонтаж,например,приконсервацииназиму.

9. Заполнитебассейнводойдонужногоуровня.

На рисунке показана форсунка с передней накладкой Marine.

Настенноековровое

покрытие

Лайнер

Puts

Mursten

Впускная

труба

Настенная

прокладка

Лайнер

Термокорпусбассейна

Впускная

труба

Арматурный

стержень

Бетон

Уплотнение2мм

Настеннаяпрокладка

Уплотнительноекольцо

Пластмассовыешайбы

(2шт.)

Винт(2шт.)

M5x20Torx

Шаровой

Передняянакладка

Винт(6шт)

M5x16

Передняя

Уплотнение1,5ммсамоклеящееся

Впускнаятруба

Входной

корпус

Лайнер

Скругленныйкрай

Pahlen MA55-17 Bedienungsanleitung

Marke: Pahlen

Modell: MA55-17

Typ: Bedienungsanleitung

PDF Herunterladen

Bericht

in anderen Sprachen

English: Pahlen MA55-17 Owner's manual
svenska: Pahlen MA55-17 Bruksanvisning

Pahlen MA55-17 Bedienungsanleitung

Pahlen MA55-17 Bedienungsanleitung

in anderen Sprachen

Verwandte Papiere