Auriol Z31408A Operation and Safety Notes

Z31408A/Z31408B/

Z31408C/Z31408D

RADIO ALARM CLOCK

Operation and Safety Notes

RADIOSTYRD VÄCKARKLOCKA

Bruksanvisning och säkerhetsanvisningar

RADIO-OHJATTU HERÄTYSKELLO

Käyttö- ja turvallisuusohjeet

RADIOVÆKKEUR

Betjenings- og sikkerhetshenvisninger

FUNKWECKER

Bedienungs- und Sicherheitshinweise

3

86663_aur_Funkwecker_Cover_LB3.indd 2 21.01.13 13:27

GB / IE Operation and Safety Notes Page 7

FI Käyttö- ja turvaohjeet Sivu 25

SE Bruksanvisning och säkerhetsanvisningar Sidan 43

DK Brugs- og sikkerhedsanvisninger Side 60

DE / AT / CH Bedienungs- und Sicherheitshinweise Seite 78

86663_aur_Funkwecker_Cover_LB3.indd 3 21.01.13 13:27

3

A

Z31408A/Z31408B

13 11

10

5

6

7

8

9

14

15

16

17

18

12

21 3 4

86663_aur_Funkwecker_Content_LB3.indd 3 21.01.13 13:25

4

AAA 1.5V

B

Z31408A/Z31408B

19 20

86663_aur_Funkwecker_Content_LB3.indd 4 21.01.13 13:25

5

C

Z31408C/Z31408D

1

18 17 2 3 4 5 6

15

7

8

14 13 12 11 10

16

9

86663_aur_Funkwecker_Content_LB3.indd 5 21.01.13 13:25

6

I

S

O

T

C

D

I

D

19 20

Z31408C/Z31408D

86663_aur_Funkwecker_Content_LB3.indd 6 21.01.13 13:25

7 GB/IE

Table of Contents

Introduction

Intended use ................................................................Page 8

Description of parts .....................................................Page 9

Technical information ..................................................Page 10

Included items ..............................................................Page 11

Safety

General safety information .........................................Page 11

Battery safety instructions ............................................Page 13

Operation ................................................................Page 14

Setting the radio-controlled alarm clock

into operation ..............................................................Page 15

Using the 12 / 24 hour display ..................................Page 17

Display temperature in °C / °F ..................................Page 17

Setting the time, time zone and weekday manually ...Page 18

Setting the alarm ..........................................................Page 19

Activating / Deactivating the alarm ............................Page 20

Using SNOOZE / LIGHT button .................................Page 20

Changing the batteries ................................................Page 21

Troubleshooting.................................................Page 21

Cleaning and care ............................................Page 22

Disposal .....................................................................Page 22

Information

Declaration of conformity............................................Page 24

86663_aur_Funkwecker_Content_LB3.indd 7 21.01.13 13:25

8 GB/IE

Introduction

Radio alarm clock

Introduction

Keep this manual in a safe place. If you pass

the product on to anyone else, please ensure

that you also pass on all the documentation.

Intended use

The clock shows the time in 12 / 24-hour mode (in hours,

minutes and seconds), the day of the week, the date and

the room temperature. The clock is also equipped with two

diﬀerent alarm times. The clock is only suitable for opera-

tion in enclosed spaces at normal room temperature. Any

other use or modiﬁcation of the clock constitute improper

use and may result in injury and / or damage to the clock.

The manufacturer is not liable for damage caused by im-

proper use. The clock is not intended for commercial use.

1

2

86663_aur_Funkwecker_Content_LB3.indd 8 21.01.13 13:25

9 GB/IE

o

.

Introduction

Description of parts

1

Alarm 1

2

Z

symbol (SNOOZE)

3

Alarm 2

4

Minute display

5

Radio symbol

6

Battery symbol

7

Summer time symbol

8

Second display

9

Inside temperature

10

SET button (Alarm 2)

11

DOWN button (“downwards“)

12

MODE button (“set”)

13

UP button (“upwards“)

14

SET button (Alarm 1)

15

Weekday display

16

Date display

17

Hour display

18

AM / PM symbol (12-hour format)

19

SNOOZE / LIGHT button

20

Battery compartment

86663_aur_Funkwecker_Content_LB3.indd 9 21.01.13 13:25

10 GB/IE

Introduction

Technical information

Battery type: 2 x 1.5 V AAA

Temperature

measurement range: –9.9 °C - + 49.9 °C

14.2 °F - + 121.8 °F

Note: If the temperature measured is more than + 49.9 °C,

“HH” will appear in the display.

If the temperature measured is less than –9.9 °C, “LL” will

appear in the display.

Colour:

Z31408A: tall with black housing

Z31408B: tall with silver housing

Z31408C: wide with black housing

Z31408D: wide with silver housing

1

2

1

i

n

a

K

I

86663_aur_Funkwecker_Content_LB3.indd 10 21.01.13 13:25

11 GB/IE

C

,

l

Introduction / Safety

Included items

1 radio-controlled alarm clock

2 1.5 V

AAA batteries

1 operating instructions

Safety

Please read all safety information and

instructions. Failure to comply with the safety information

and instructions may result in, ﬁre and / or severe injuries.

KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS

IN A SAFE PLACE FOR FUTURE REFERENCE!

General safety

information

DANGER OF LOSS

OF LIFE OR ACCIDENT TO INFANTS

AND CHILDREN! Never leave children

86663_aur_Funkwecker_Content_LB3.indd 11 21.01.13 13:25

12 GB/IE

Safety

unsupervised with the packaging material. The pack-

aging material represents a danger of suﬀocation.

Children frequently underestimate the dangers. Always

keep children away from the device. Do not allow the

device to be used as a toy.

This device is not intended to be used by persons (in-

cluding children) with restricted physical, sensory or

mental abilities or with insuﬃcient experience and/or

knowledge, unless they are supervised by a person who

is responsible for their safety or they have received in-

struction on how to use the device from such a respon-

sible person. Children should be supervised in order

to ensure that they do not play with the device.

DANGER TO LIFE! Batteries can be

swallowed, which may represent a danger to life. If a

battery has been swallowed, medical help is required

immediately.

Do not operate the device if it is damaged. Damaged

devices could put your life at risk.

Please note that damage arising from improper handling,

non-observance of the operating instructions or inter-

ference with the inside of the device by unauthorised

persons is excluded from the warranty.

86663_aur_Funkwecker_Content_LB3.indd 12 21.01.13 13:25

13 GB/IE

s

e

o

-

n

-

d

g

,

Safety

Never take the device apart. Improper repairs may

place the user in considerable danger. Repairs should

only be carried out by specialist personnel.

Battery safety

instructions

Remove the batteries from the device if they have not

been used for a long period.

CAUTION! DANGER OF EXPLOSION!

The batteries must never be recharged!

Make sure you insert the batteries with the correct

polarity! This is indicated in the battery compartment.

If necessary clean the contacts on the batteries and

on the device before inserting them.

Only use batteries of the speciﬁed type. Otherwise

there is danger of explosion.

Remove exhausted batteries from the device immedi-

ately. There is an increased danger of leaks!

If you disregard the above instructions and advice,

your batteries may discharge beyond their minimum

86663_aur_Funkwecker_Content_LB3.indd 13 21.01.13 13:25

14 GB/IE

Safety / Operation

voltage, thus increasing the chance of leakage. If the

batteries in your device have leaked, remove them im-

mediately to prevent damage to the device!

Batteries do not belong in household refuse!

Every consumer is obliged to dispose of batteries

properly in accordance with the regulations!

Keep batteries away from children. Do not throw

batteries into a ﬁre. Never short-circuit them or take

them apart.

Do not let the ﬂuid from a leaking battery come into

contact with your skin, eyes or mucous membranes.

Any parts of the body coming into contact with battery

acid should be rinsed oﬀ with copious amounts of

water and / or a doctor contacted if necessary!

Operation

Make sure that the device is standing safely on a

stable surface.

Do not place the device near to sources of interference

such as televisions, computers, thick walls, etc. These

may disrupt reception of the radio signal.

86663_aur_Funkwecker_Content_LB3.indd 14 21.01.13 13:25

15 GB/IE

-

e

Operation

Do not use the clock in reinforced concrete buildings,

e. g. airports, high-rises, factories or basements. This

can seriously disrupt reception of the radio signal.

Do not start radio reception in a moving vehicle, e. g.

car or train. Reception of the radio signal by the device

can disrupt the vehicle electronics.

Do not expose the clock to temperatures below --20 °C

for any length of time.

Setting the radio-controlled alarm

clock into operation

Remove the protective foil before ﬁrst use.

Open the battery compartment

20

on the back of the

clock.

Insert two AAA batteries.

Note: Make sure that the polarity is correct when

you insert the batteries. This is indicated in the battery

compartment.

Close the battery compartment.

86663_aur_Funkwecker_Content_LB3.indd 15 21.01.13 13:25

16 GB/IE

Operation

As soon as the batteries are inserted, automatic reception

of the radio signal begins. The correct time and the date

are displayed after 3–10minutes. During reception, all

buttons are deactivated except the DOWN button

11

and

the SNOOZE / LIGHT button

19

. You can stop the reception

of the radio signal by pressing the DOWN button. To restart

the reception, press and hold down the DOWN button.

Note: Do not change the location of the projection radio-

controlled alarm clock during reception. This may disrupt

reception.

Radio Signal (DCF):

The DCF signal (time signal transmitter) consists of time

impulses, which are transmitted from one of the most

accurate clocks in the world, in the proximity of Frankfurt /

Main, Germany – it varies by 1 seconds in 1 million years.

Your radio-controlled alarm clock will receive the time sig-

nal under optimum conditions up to a distance of approx.

1,500 km from Frankfurt am Main, Germany. Reception

of the radio signal generally takes approx. 3–10 minutes.

R

(

e

o

a

T

86663_aur_Funkwecker_Content_LB3.indd 16 21.01.13 13:25

17 GB/IE

d

n

r

t

o

-

/

.

Operation

Reception can be considerably impaired by obstacles

(e.g. concrete walls) or sources of interference (e.g. other

electrical devices). You may have to change the location

of the radio-controlled clock (e.g. near a window) if there

are problems with reception.

Using the 12 / 24 hour display

Press the UP button

13

to switch between the 12-hour

and the 24-hour format.

Note: AM stand for mornings, PM for afternoons in

the 12-hour format.

Display temperature in °C /°F

The current inside temperature

9

is indicated on the LCD.

Press the DOWN button

11

to switch between the

Celsius and Fahrenheit temperature scales.

86663_aur_Funkwecker_Content_LB3.indd 17 21.01.13 13:25

18 GB/IE

Operation

Setting the time, time zone and

weekday manually

Press and hold down the MODE button

12

for approx.

3seconds. The minute display

4

ﬂashes.

Press the UP or DOWN button

11

,

13

to set the

desired time zone (–12 hours to + 12 hours).

Note: Should you be in a country in which the DCF

signal can be received but the time is diﬀerent to your

current local time, you can use the time zone setting

to have the clock display your current local time. For

example, if you are in a country where the local time

is one hour behind Central European Time (CET), then

you should set the time zone to + 01. The time continues

to be controlled by DCF but the clock shows one hour

more.

Press the MODE button to conﬁrm your setting.

Set the hours, minutes, the year, the day and the lan-

guage of the weekday in the same manner.

Note: The following languages are available:

GER = German

ENG = English

DAN = Danish

E

N

I

T

F

86663_aur_Funkwecker_Content_LB3.indd 18 21.01.13 13:25

19 GB/IE

x

.

r

n

s

r

Operation

ESP = Spanish

NET = Dutch

ITA = Italian

FRA = French

Setting the alarm

The radio-controlled alarm clock is equipped with

two alarm functions. Press and hold down the

SET

button

14

or the SET button

10

to set Alarm1 or

Alarm2. The hour indicator

17

of the alarm time

ﬂashes in the display.

Press the UP or DOWN button

11

,

13

to set the hours.

Press the MODE button

12

to conﬁrm your setting.

The minute indicator

4

ﬂashes in the display.

Press the UP or DOWN button to set the minutes. Press

the MODE button to conﬁrm your setting.

86663_aur_Funkwecker_Content_LB3.indd 19 21.01.13 13:25

20 GB/IE

Operation

Activating / Deactivating the alarm

Press the SET button

14

or the SET button

10

to

activate the relevant alarm.

The alarm symbol or appears in the LC display.

Press the SET button or the SET button to deacti-

vate the alarm.

Using SNOOZE / LIGHT button

Press the SNOOZE /LIGHT button

19

while the alarm

signal is sounding to activate the snooze function.

The alarm signal is silenced and the displays or

and Zz ﬂash. The alarm signal sounds again after

approx. 5 minutes.

Press any button apart from the SNOOZE- / LIGHT

button

19

to deactivate the snooze function.

Note: Press any button apart from the SNOOZE- /

LIGHT button to stop the alarm signal.

Note: The backlight illuminates when you press the

SNOOZE / LIGHT button.

T

b

i

n

86663_aur_Funkwecker_Content_LB3.indd 20 21.01.13 13:25

Seite wird geladen ...

Auriol Z31408A Operation and Safety Notes

Dieses Handbuch eignet sich auch für

Auriol Z31408A Operation and Safety Notes

in anderen Sprachen

Verwandte Artikel

Andere Dokumente