EverFocus EZH5040 Benutzerhandbuch
- Kategorie
- Sicherheitskameras
- Typ
- Benutzerhandbuch
2
E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N
Operation Instruction
2011 EverFocus Electronics Corp
Please read this manual first for correct installation and operation. This manual should be retained for
future reference. The information in this manual was current when published. The manufacturer reserves
the right to revise and improve its products. All specifications are therefore subject to change without
notice.
All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form or by
any means without written permission of the EverFocus Electronics Corporation.
3
PRECAUTIONS
1.
Do not install the camera near electric or magnetic fields.
Install the camera away from TV/radio transmitters, magnets, electric motors, transformers
and audio speakers since the electromagnetic fields generated from these devices may
distort the video image or otherwise interfere with camera operation.
2. Never disassemble the camera beyond the recommendations in this manual nor
introduce materials other than those recommended herein. Improper disassembly or
introduction of corrosive materials may result in equipment failure or other damage.
3. Try to avoid facing the camera toward the sun.
In some circumstances, direct sunlight may cause permanent damage to the sensor and/or
internal circuits, as well as creating unbalanced illumination beyond the capability of the
camera to compensate.
4. Keep the power cord away from water and other liquids and never touch the power
cord with wet hands. Touching a wet power cord with your hands or touching the power
cord with wet hands may result in electric shock.
5. Never install the camera in areas exposed to oil, gas or solvents.
Oil, gas or solvents may result in equipment failure, electric shock or, in extreme cases, fire.
6. Cleaning
For cameras with interchangeable lenses, do not touch the surface of the sensor directly
with the hands. Use lens tissue or a cotton tipped applicator and ethanol to clean the
sensor and the camera lens. Use a damp soft cloth to remove any dirt from the camera
body. Please do not use complex solvents, corrosive or abrasive agents for cleaning of any
part of the camera.
7. Do not operate the camera beyond the specified temperature, humidity or power
source ratings. This camera is suitable for indoor and outdoor operation. Use the
camera at temperatures within -10°C~50°C (14°F~122°F) and in an IP67 compliant
environment; this device is not rated as submersible. The input power source is
12VDC/24VAC. The use of properly fused or Class 2 power limited type supplies is
highly recommended.
8. Mounting
Use care in selecting a solid mounting surface which will support the weight of the camera
plus any wind, snow, ice or other loading, and securely attach the camera to the mounting
surface using screws and anchors which will properly support the camera. If necessary
(e.g. when mounting to drop ceilings) use a safety wire to provide additional support for the
camera.
4
ATTENTION!
This is a class A produ
ct which may cause radio interference in a domestic
environment; in this case, the user may be urged to take adequate measures.
Federal Communication Commission Interfere
nce Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following measures :
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
•Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the users’ authority to operate this equipment.
5
Table of Contents
1. PRODUCT OVERVIEW...................................................................................................................... 6
1.1
F
EATURES
........................................................................................................................................... 6
1.2
A
CCESSORY
P
ARTS
L
IST
...................................................................................................................... 7
1.3
S
PECIFICATIONS
.................................................................................................................................. 8
1.4
D
IMENSIONS
........................................................................................................................................ 9
2. INSTALLATION .............................................................................................................................. 100
3. OSD MENU & CONFIGURATION................................................................................................ 133
6
1. Product Overview
The EZH5040 is an HDcctv 3-Axis outdoor bullet camera with True Day/Night capability in an
IP67 vandal resistant housing. Based on a Sony 1.3 megapixel progressive scan sensor for HD
720p resolution 100% digital images, it delivers vastly superior video quality compared to
traditional CCTV images. This superior resolution not only captures more critical evidentiary
information, but the inherent ability for megapixel video also extends the area of coverage,
expedites completion of investigations, resolves complaints and reduces both capital and
operational costs. Designed with long lifespan IR LEDs, the EZH5040 can capture images at up
to 45m (~150 ft.) in low or no light environments.
No major upgrade to the IT network is required to deploy this powerful technology; HDcctv cameras
communicate at digital speeds up to 1.5Gb/s over existing or new coaxial cable (RG59 or other types
for longer distances), using industry standard BNC connectors. With its 3-Axis positioning and vari-
focal 3-9mm megapixel auto iris lens the EZH5040 delivers flexible, robust coverage in a wide range of
demanding surveillance environments while delivering stunning HD image quality.
1.1 Features
HDcctv Alliance Base Line Compliance
HDcctv Megapixel real time 1280x720 HD video over coax
Supports video outputs of 720p25/30/50/60 (field select)
True day/night operation with automatic ICR module
Includes DNR to improve picture clarity while enabling DVRs to improve disk storage
utilization
3-Axis positioning for flexible mounting and aiming
3~9mm AI VF megapixel lens captures the desired field of view
Extended IR range of up to 45m (~150 ft.)
Easy to use OSD setup menu
SD TV Out for aim and focus using a standard hand held test monitor
Dual Voltage Power Source 12VDC/24VAC
Vandal Resistant
Weather Proof IP67 rated
The HDcctv Alliance states
Look for the unique HDcctv logo to be sure:
100m transmission over even low-grade RG59
Plug-and-play interoperability with other compliant products
Forward compatibility with future versions of the standard
See www.hidefcctv.org for details
Ch
apter
1
7
1.2 Accessory Parts List
Please be careful when you unpack the box due to the electronics devices inside. Check and
make sure that you have all the items listed below inside the original box:
HD CCTV
Digital V ideo
Camera
SER VICE VIDEO
OUTPUT TEST
CABL
E
L WRENCH
OPERATION
MANUAL
SCREW - 4ea
Plastic anchors - 4ea
Please Note: If an item appears to have been damaged in shipment, replace it properly in its carton
and notify the shipper. If any items are missing, notify your EverFocus Electronics Corp. Sales
Representative or Customer Service. The shipping carton is the safest container in which the unit may
be transported. Save it for possible future use.
8
1.3 Specifications
Pickup Device 1/3” Sony Megapixel Color Progressive CMOS Sensor
Sensitivity 1lux/F=1.4; 0lux(IR LED ON)
S/N Ratio Max. 50dB
Video Format Main Output HDcctv 1.5Gb/s digital system
Resolution Main Output 1280x720
Video Mode Main Output Field select 720p25, 720p30, 720p50, 720p60
Main Output Connector BNC
Video Format Test Output NTSC/PAL selectable
Test Output Connector Pin header; adapter cable to BNC supplied
Exposure Control via lens DC iris
Lens Type Vari-focal lens, Auto Iris, f=3~9mm
True Day/Night Control Yes (Auto IR cut filter removal)
Back Light Compensation On/Off selectable
Auto Gain Control Yes (level 0~150)
Auto White Balance ATW/Push/Manual
DNR Off/Low/Mid/High selectable
OSD Menu Yes (controlled from 5-Axis joystick control)
Image Flip Off/H Flip/V Flip/HV Flip
IR Wavelength 850nm
IR Range Up to 45m (~150 ft.)
Power Source & Consumption 24VAC: 12W max. (~500mA)
12VDC: 1.1A max.
Dimensions 196mm(L) x 83mm(H) x 110mm Diameter(W)
12.9in.(L) x 3.26in.(H) x 4.33in. Diameter(W)
Weight 2kg /4.4 lbs
Operating Temperature -10°C~50°C ; 14°F~122°F
Weather Proof IP67 rated
Vandal Resistant Yes
Certifications FCC/CE; HDcctv Alliance Base Line Compliance
Seite laden ...
Seite laden ...
Seite laden ...
Seite laden ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
EverFocus EZH5040 Benutzerhandbuch
- Kategorie
- Sicherheitskameras
- Typ
- Benutzerhandbuch
in anderen Sprachen
- English: EverFocus EZH5040 User manual