13 GB
When selecting the setup location for the solar cell 5 be sure the
solar cell, just as the twilight sensor, are not affected by other light
sources, e.g. street lighting.
The switch 6 on the main unit 1 (Fig. A) features the following functions:
Position “OFF“: Motion detector 3 and LED spotlight 2 are off. In
direct sunlight the rechargeable batteries 11 are
charged by the solar cell 5. Use this setting to
charge drained rechargeable batteries 11 (see
“Charging the rechargeable batteries“).
Position “AUTO“: The solar cell 5 charges the rechargeable batteries
11 in sunlight. The product automatically switches on
or off once the solar cell 5 detects dusk or dawn. To
ensure a long life the LEDs will not be fully powered in
this setting, but only provide approx. 20 % of their full
light power (eco mode). When fully charged, the re-
chargeable batteries 11 will provide approx. 8 hours
of light in this setting.
Position “PIR“: The solar cell 5 charges the rechargeable batteries
11 in sunlight. The solar cell 5 automatically switches
the product on in twilight or the dark when the motion
detector 3 detects movement. The light ON time is
preset to approx. 1.5 minutes. If additional movement
is detected during these 1.5 minutes, the light ON
time will reset. In this setting the LEDs will be fully
powered. With the rechargeable batteries 11 fully
charged the charge on this setting will provide light
for a total of approx. 2 hours.