Parkside 110145 Instructions Manual

CORDLESS HOT GLUE GUN PHPA 3.6 A1

IAN 110145

AKKU-HEISSKLEBEPISTOLE

Originalbetriebsanleitung

CORDLESS HOT GLUE GUN

Translation of the original instructions

GB / IE Translation of the original instructions Page 1

DE / AT / CH Originalbetriebsanleitung Seite 19

Before reading, unfold the page containing the illustrations and familiarise

yourself with all functions of the device.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen

Sie sich anschließend mit allen Funktionen des Gerätes vertraut.

PHPA 3.6 A1

GB

│

IE

│

1 ■

Contents

Introduction .................................. 2

Intended use ..........................................2

Features .............................................2

Package contents ......................................3

Technical data ........................................3

General power tool safety warnings ............. 4

Use and handling of the cordless power tool .................6

Safety guidelines for battery chargers ......................7

Before initial operation ........................ 8

Charging the appliance .................................8

Battery level display ...................................9

Preparing the surfaces to be glued .........................9

Initial operation .............................. 10

Maintenance and cleaning ..................... 11

Disposal .................................... 12

Kompernass Handels GmbH warranty ........... 13

Service ..................................... 16

Importer .................................... 16

Translation of the original Conformity Declaration . 17

PHPA 3.6 A1

■ 2

│

GB

│

IE

CORDLESS HOT GLUE GUN PHPA 3.6 A1

Introduction

Congratulations on the purchase of your new appliance. You

have selected a high-quality product. The operating instruc-

tions are part of this product. They contain important informa-

tion on safety, usage and disposal. Before using the product, familiar-

ise yourself with all handling and safety guidelines. Use the product

only as described and for the range of applications speciﬁed. Please

also pass these operating instructions on to any future owner(s).

Intended use

This appliance is intended for gluing wood, card-board, packaging,

PVC, carpet, seals, plastics, leather, ceramics, glass and fabric with

hot-melt adhesive. The material to be glued must be clean, dry and

free of grease. Any other usage of or modiﬁcation to the appliance is

deemed to be improper and carries a signiﬁcant risk of accidents.

The manufacturer shall assume no liability for damage attributable to

misuse. The appliance is not meant for commercial use.

Features

Temperature indicator

ON/OFF switch

Battery capacity/charge level indicator

Glue stick

Feeder shaft

Trigger

Mains adapter

Charging contacts

Charger with appliance cradle

Nozzle

Thermal protection for nozzle

PHPA 3.6 A1

GB

│

IE

│

3 ■

Package contents

1 Cordless hot glue gun PHPA 3.6 A1

1 charger with stand

6 glue sticks

1 operating instructions

Technical data

Cordless hot glue gun PHPA 3.6 A1:

Rated voltage: 230 - 240 V ∼, 50 Hz (alternating current)

Rated power: 5 W

Battery rated voltage: 3.7 V

(direct current)

Cells: 1

Battery (integrated): LITHIUM-ion

Battery capacity: 1500 mAh

Heating time: approx. 60 sec.

Temperature: approx. 170°C

Glue stick diameter: Ø 7 mm

Glue stick length: 140 mm

Working time with one

battery charge: approx. 30 min.

Charger PHPA 3.6 A1-2:

INPUT:

Rated voltage: 100 - 240 V

~

50/60 Hz

(alternating current)

Rated current: 200 mA

OUTPUT:

Rated voltage: 5.5 V

(direct current)

Rated current: 600 mA

Charging time: approx. 3 hours

Protection class: II /

(double shielded)

PHPA 3.6 A1

■ 4

│

GB

│

IE

General power tool safety

warnings

WARNING!

► Read all safety warnings and all instructions. Failure to fol-

low the warnings and safety instructions may result in electric

shock, ﬁre and/or serious injury.

Save all warnings and safety instructions for future

reference.

The term “power tool” in the safety instructions refers to your

mains-operated (corded) power tool or battery-operated (cordless)

power tool.

■ This appliance may be used by children of the age of 8 years or

more and by persons with reduced physical, sensory or mental

capabilities or lack of experience and/or knowledge if they are

being supervised or have been instructed with regard to the safe

use of the appliance and have understood the potential risks.

Children must not use the appliance as a plaything.

Cleaning and user maintenance should not be performed by

children unless they are under supervision.

■ Children should be supervised to ensure that they do not play

with the appliance.

■ CAUTION! This appliance must be placed into the charger with

appliance cradle

when not in use.

■ Always protect the appliance from rain and moisture. Water

entering a power tool will increase the risk of electric shock.

PHPA 3.6 A1

GB

│

IE

│

5 ■

■ Do not misuse the power cord, e.g. to carry or hang up the

appliance, or to pull the plug from the socket. Keep cord

away from heat, oil, sharp edges or moving parts. If the power

cord is damaged or severed during work, do not touch the cord

but rather pull out the power plug. Damaged or entangled cords

increase the risk of electric shock.

■ To avoid potential risks, if the appliance power cable is dam-

aged, it must be replaced by the manufacturer, its customer

service or by a qualiﬁed technician.

■ Only for indoor use.

■ If you take a break of longer than 30 minutes, pull out the power

plug.

■ Allow the appliance to cool completely after use and before

storage.

■ Do not work on any material containing asbestos.

■ Avoid the risk of injury or ﬁre as well as health risks: Risk of

burns! The temperature of nozzle reach a temperature of around

170°C. The temperature of adhesive reach a temperature of

around 170°C. Do not touch the nozzle or the glue. Do not

allow hot glue to come into contact with people or animals. In

case of contact with skin, rinse the aﬀected part in cold running

water for a few minutes. Do not attempt to remove the adhesive

from the skin.

■ Always route the power cord towards the rear, away from the

appliance.

PHPA 3.6 A1

■ 6

│

GB

│

IE

Use and handling of the cordless power tool

a) Charge the appliance using only the charger recommended by

the manufacturer. Chargers are often designed for a particular

type of

rechargeable battery. There is a risk of ﬁre if other types of

rechargeable battery are used.

b) Only the rechargeable battery units supplied are to be used

with the power tools. The use of other rechargeable batteries

may result in injury or a ﬁre hazard.

c) When they are not being used, store re-

chargeable batteries away from paper clips, coins, keys. nails,

screws or other small metal objects that could cause the con-

tacts to be bridged. Short-circuiting the contacts of a rechargea-

ble battery may result in burns or ﬁre.

d) Fluid may leak out of rechargeable batteries if they are mis-

used. If this happens, avoid contact with the ﬂuid. If accidental

contact

occurs, rinse the aﬀected area with water. Seek additional

medical help if any of the ﬂuid gets into your eyes. Escaping

battery

ﬂuid may cause skin irritation or burns.

CAUTION! RISK OF EXPLOSION! Never charge

non-rechargeable batteries!

Protect the appliance from heat, e.g. also from

continuous sunlight, ﬁre, water and humidity.

There is a risk of explosion!

PHPA 3.6 A1

GB

│

IE

│

7 ■

Safety guidelines for battery chargers

■ This appliance may be used by children aged 8 years and

above and by persons with limited physical, sensory or mental

capabilities or lack of experience and knowledge, provided that

they are under supervision or have been told how to use the

appliance safely and are aware of the potential risks. Children

must not use the appliance as a plaything. Cleaning and user

maintenance tasks may not be carried out by children unless they

are supervised.

This charger is suitable for indoor use only.

WARNING! For the purposes of recharging the battery,

only use the detachable supply unit provided with this

appliance.

The temperature of the nozzle

reach a temperature of

around 170°C.

WARNING!

■ Never operate the charger with a damaged power cord

or power plug. A damaged power cord causes danger to

life by electric shock.

170

PHPA 3.6 A1

■ 8

│

GB

│

IE

Before initial operation

Charging the appliance

Only for indoor use!

NOTE

►

The battery is supplied partially charged. Before ﬁrst use,

charge the battery for at least 3 hours. Li-ion batteries can

be charged at any time without adversely aﬀecting their

service life. Interruption of the charging process will not

damage the battery.

■ Never charge the appliance when the ambient temperature is

below 10°C or above 40°C.

Start charging:

♦ Connect the mains adapter

to a

100 - 240 V

~

50/60 Hz power source.

♦ Place the cordless hot glue gun onto the charging cradle

.

The battery charge level indicator lights up red.

Stop charging:

♦ The battery charge level indicator

turns green as soon as the

charging process is complete and the cordless hot glue gun is

ready for use.

♦ Remove the cordless hot glue gun from the charging cradle

.

♦ Disconnect the mains adapter

from the power supply.

PHPA 3.6 A1

GB

│

IE

│

9 ■

Battery level display

The battery level display indicates the charge level using 2 colour-

ed LEDs.

Green LED:

The battery is fully charged.

Red LED:

The battery is ﬂat. Recharge it.

Preparing the surfaces to be glued

■ Do not use ﬂammable solvents to clean the surfaces to be glued.

■ The ambient temperature and the materials to be bonded may

not be colder than 5°C and not warmer than 50°C.

■ The area to be glued must be clean, dry and free of grease.

♦ Smooth surfaces should be roughened before gluing.

♦ Quick-cooling materials such as steel should be warmed a little

to facilitate adhesion.

PHPA 3.6 A1

■ 10

│

GB

│

IE

Initial operation

Inserting a glue stick:

♦ Push the glue stick

into the feeder shaft .

♦ Allow the appliance heat up for about 60 seconds. The appliance is

now ready for use.

Switching on:

♦ To turn on the cordless hot glue gun, press the ON/OFF switch

until the temperature indicator lights up red. The glue is

heated up.

■ The temperature indicator

lights up green as soon as the

appliance has reached working temperature.

Switching oﬀ:

♦ To turn oﬀ the cordless hot glue gun, press the ON/OFF switch

until the temperature indicator goes oﬀ.

♦ After use, place the cordless hot glue gun down carefully and

allow it to cool down fully before you store the appliance. The

hot nozzle

can cause damage and/or burns.

Automatic switch oﬀ:

NOTE

► The cordless hot glue gun switches itself oﬀ after 10 minutes

to save energy.

–

Switch the cordless hot glue gun back on and check the temper-

ature indicator and the battery level display to see

whether the appliance needs to be recharged or heated

further.

► To save energy, do not switch the cordless hot glue gun on

unless you plan to use it.

PHPA 3.6 A1

GB

│

IE

│

11 ■

Gluing:

♦ Pull the trigger

to regulate the ﬂow of glue

in accordance with your requirements.

♦ Apply the glue in spots. For ﬂexible materials, such as textiles,

apply the glue in zigzag lines.

♦ Press the two workpieces to be bonded together immediately

after applying the glue and hold for about 30 seconds. The

glued bond is ready after about 5 minutes.

♦ During pauses in work, place the cordless hot glue gun onto the

charging cradle

.

♦ Remove any glue residue after it has cooled down with a sharp

knife. Bonded joints can be released by heating.

Maintenance and cleaning

The cordless hot glue gun is maintenance free.

WARNING! Always remove the mains adapter

from

the power socket before cleaning the appliance. Keep the

appliance clean and dry at all times.

■ The appliance must always be kept clean, dry and free from oil

or grease.

■ Never permit ﬂuids to penetrate inside the appliance.

■ Use a soft cloth to clean the appliance housing. Never use ben-

zine, solvents or cleansers which can damage plastic.

PHPA 3.6 A1

■ 12

│

GB

│

IE

Disposal

The packaging is made from environmentally friendly

material and can be disposed of at your local recycling

plant.

Do not dispose of electrical appliances with

normal domestic waste!

As required by European Guideline 2012/19/EU, worn-out

electrical appliances must be collected separately and fed into an

environmentally compatible recycling process.

The appliance and the batteries must be disposed of separately.

1) To do this, unscrew all the cross-head screws on the motor block

and take it apart.

2) Cut the connection cable from the battery and remove the battery

from the appliance.

Dispose of the appliance via an approved waste disposal company

or your municipal waste disposal facility. Please comply with all

applicable regulations. Please contact your waste disposal facility if

you are in any doubt.

Do not dispose of batteries in your normal

domestic waste!

PHPA 3.6 A1

GB

│

IE

│

13 ■

Disposal of (rechargeable) batteries

Used batteries may not be disposed of in domestic waste. Consum-

ers are required by law to dispose of batteries at a collection point

provided by their local community or at a retail store. The purpose

of this obligation is to ensure that batteries are disposed of in an

environmentally friendly manner. Only dispose of batteries when

they are fully discharged.

Kompernass Handels GmbH warranty

Dear Customer,

This appliance has a 3-year warranty valid from the date of pur-

chase. If this product has any faults, you, the buyer, have certain

statutory rights. Your statutory rights are not restricted in any way

by the warranty described below.

Warranty conditions

The validity period of the warranty starts from the date of purchase.

Please keep your original receipt in a safe place. This document

will be required as proof of purchase.

If any material or production fault occurs within three years of the

date of purchase of the product, we will either repair or replace the

product for you at our discretion. This warranty service is depend-

ent on you presenting the defective appliance and the proof of

purchase (receipt) and a short written description of the fault and

its time of occurrence.

If the defect is covered by the warranty, your product will either be

repaired or replaced by us. The repair or replacement of a product

does not signify the beginning of a new warranty period.

PHPA 3.6 A1

■ 14

│

GB

│

IE

Warranty period and statutory claims for defects

The warranty period is not prolonged by repairs eﬀected under the

warranty. This also applies to replaced and repaired components.

Any damage and defects present at the time of purchase must be

reported immediately after unpacking. Repairs carried out after

expiry of the warranty period shall be subject to a fee.

Scope of the warranty

This appliance has been manufactured in accordance with strict

quality guidelines and inspected meticulously prior to delivery.

The warranty covers material faults or production faults. The war-

ranty does not extend to product parts subject to normal wear and

tear or fragile parts such as switches, batteries, baking moulds or

parts made of glass.

The warranty does not apply if the product has been damaged,

improperly used or improperly maintained. The directions in the

operating instructions for the product regarding proper use of the

product are to be strictly followed. Uses and actions that are dis-

couraged in the operating instructions or which are warned against

must be avoided.

This product is intended solely for private use and not for commer-

cial purposes. The warranty shall be deemed void in cases of mis-

use or improper handling, use of force and modiﬁcations/repairs

which have not been carried out by one of our authorised Service

centres.

PHPA 3.6 A1

GB

│

IE

│

15 ■

Warranty claim procedure

To ensure quick processing of your case, please observe the follow-

ing instructions:

▯ Please have the till receipt and the item number (e.g. IAN

12345) available as proof of purchase.

▯ You will ﬁnd the item number on the type plate, an engraving on

the front page of the instructions (bottom left), or as a sticker on

the rear or bottom of the appliance.

▯ If functional or other defects occur, please contact the service

department listed either by telephone or by e-mail.

▯ You can return a defective product to us free of charge to the

service address that will be provided to you. Ensure that you en-

close the proof of purchase (till receipt) and information about

what the defect is and when it occurred.

You can download these instructions along with

many other manuals, product videos and software

on www.lidl-service.com.

■ 16

│

GB

│

IE

Service

WARNING!

► Have your appliance repaired by qualiﬁed specialists

only. Always use original spare parts. This will ensure the

ongoing safety of the appliance.

WARNING!

► Plugs and power cords should only be replaced by the

manufacturer of the power tool or the manufacturer's

authorised customer service agent. This will ensure the

ongoing safety of the appliance.

Service Great Britain

Tel.: 0871 5000 720 (£ 0.10/Min.)

E-Mail: k[email protected]

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (oﬀ peak))

E-Mail: k[email protected]

IAN 110145

Importer

Please note that the following address is not the service address.

Please use the service address provided in the operating instructions.

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

PHPA 3.6 A1

GB

│

IE

│

17 ■

Translation of the original

Conformity Declaration

We, KOMPERNASS HANDELS GMBH, documents oﬃcer: Mr. Semi

Uguzlu, BURGSTR. 21, 44867 BOCHUM, Deutschland, hereby

declare that this product complies with the following standards,

normative documents and the EC directives:

EC Low Voltage Regulations

(2014 / 35 / EU)

EMC (Electromagnetic Compatibility)

(2014 / 30 / EU)

RoHS Directive

(2011/65/EU)

Applied harmonised standards:

EN 60335-1:2012+A11

EN 60335-2-45:2002+A1+A2

EN 62233:2008

EN 55014-1:2006+A1+A2

EN 55014-2:2015

EN 61000-3-2:2014

EN 61000-3-3:2013

Type/Appliance designation:

Cordless hot glue gun PHPA 3.6 A1

Year of manufacture: 04 - 2016

Serial number: IAN 110145

Bochum, 26/04/2016

Seite wird geladen ...

Parkside 110145 Instructions Manual

Dieses Handbuch eignet sich auch für

Parkside 110145 Instructions Manual

in anderen Sprachen

Verwandte Artikel

Andere Dokumente