104 x 142 mm
11
unless they are supervised
and at least 8 years of age.
∙ The appliance and its
power cord must be kept
well away from children
under 8 at all times.
∙ Caution: Keep any packaging materials
well away from children – such materials
are a potential source of danger, e.g. of
suffocation.
∙Every time the appliance is used, the
main body including the power cord as
well as any attachment tted should
be checked thoroughly for any defects.
Should the appliance, for instance, have
been dropped onto a hard surface, or if
excessive force has been used to pull
the power cord, it must no longer be
used: even invisible damage may have
adverse effects on the operational safety
of the appliance.
∙ Always place the appliance on a stable,
at, level and heat-resistant surface
during operation. Do not position the
appliance on or near hot surfaces or
open ames such as hot-plates or gas
ames.
∙ Do not operate the appliance outdoors.
∙ Always connect the thermostat to its
corresponding socket on the appliance
before connecting to the mains.
∙ Do not leave the appliance unattended
while in use.
∙ Do not allow the power cord to touch hot
surfaces.
∙ Always switch off and remove the
plug from the wall socket
-in cases of malfunction,
-after use,
-during cleaning.
∙ When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
∙ No responsibility will be accepted if
damage results from improper use, or if
these instructions are not complied with.
Application
This appliance is an electric table grill
suitable for low-fat grilling of meat, sh,
poultry or vegetables.
Before using for the rst time
∙ Remove any packing materials
completely, before the appliance is used
for the rst time.
∙ The grill plate and fat collection tray
should be cleaned with a damp, lint-free
cloth. Wipe thoroughly dry afterwards.
∙ Then let the grill heat up for about 5 - 10
minutes without any food on it. This will
remove the smell typically encountered
when rst switching on a grill. (A little
smoke may be emitted; this is quite
normal, but ensure there is sufcient
ventilation.)
Indicator light
During the heating phase, the indicator light
comes on. Once the pre-set temperature
level is reached, the light goes out.