Hyundai HLT-1711 Bedienungsanleitung

Please read this manual carefully before operating your set.

Retain it for future reference.

See the label attached on the back cover and quote this infor-

mation to your dealer when you require service.

LCD

Colour Television

LCD

Colour Television

Owner’s Manual

P/NO : MAN04HY0003

HLT-1711

Installation 3

Remote control handset 4-5

Controls 4

Battery installation 5

Controls of

Front panel 6

Connection of

Back panel 7

Connection to 8-11

External equipment 8-11

Basic operation

On and Off / Programme selection 12

Volume adjustment / Quick view 12

Mute function 12

On screen language selection (option) 12

On screen menus

Menu selection 13

Setting up TV stations 14-19

Auto programme tuning 14

Menual programme tuning 15-16

Programme edit 17-18

Calling the programme table 18

Picture adjustment 19-20

CSM / Picture adjustment 19

Picture format 20

Sound adjustment 21-22

Sound adjustment 21

Stereo/Dual reception 21-22

NICAM reception (option) 22

Sound output selection 22

Time setting

Clock 23

Off time 23

On time 23

Other functions 24-25

TV, AV and PC modes 24

Child lock 24

Auto AV switching 25

Auto sleep 25

Sleep timer 25

Teletext (option) 26-28

Switch on/off 26

SIMPLE text 26

TOP text (option) 27

FASTEXT mode 27

Special teletext functions 28

Connection of PC 29-30

PC in socket (D-Sub jack) 29

Picture adjustment 30

Troubleshooting

check list 31

Contents

2

Power

This set operates on a

DC supply provided by

the AC-DC adaptor,

the voltage is as indi-

cated on the label on

the back cover. Use

only the AC-DC adap-

tor supplied with the

set and never apply an

AC mains to the set

directly. The AC-DC

adaptor operates on

an AC mains supply,

the voltage is as indi-

cated on the label of

the AC-DC adaptor.

a. Connect the DC

plug of the AC-DC adaptor to the 12V socket of the set.

b. Connect the AC-DC adaptor and it’s power cord.

c. Connect the power cord to an AC mains.

In the event of thunderstorms or powercuts, please pull out

the mains plug of the AC-DC adaptor and the aerial plug.

Do not allow anything to rest upon or roll over the power

cord, and do not place the monitor where the power cord is

subject to damage.

Warning

To prevent fire or shock hazard, do not expose the set to

rain or moisture. Do not rub or strike the Active Matrix LCD

with anything hard as this may scratch, mar, or damage the

Active Matrix LCD permanently.

Service

Never remove the back cover of the set as this can expose

you to high voltage and other hazards. If the set does not

operate properly, unplug it and call your dealer.

Aerial

Connect the aerial cable to the

socket marked +75 Ω on the

back. For the best reception an

outdoor aerial should be used.

Location

Position your set so that no

bright light or sunlight falls

directly onto the screen. Care should be taken not to

expose the set to any unnecessary vibration, moisture,

dust or heat. Also ensure that the set is placed in a position

to allow a free flow of air. Do not cover the ventilation open-

ings on the back cover.

The standing angle can be adjusted as shown in pictures.

When you install the set to use the wall mounting bracket

(optional parts), fix it carefully so as not to drop.

Cleaning

Unplug the set before cleaning the face of the LCD Screen.

Dust the set by wiping the screen and the cabinet with a

soft, clean cloth. If the screen requires additional cleaning,

use a clean, damp cloth. Do not use liquid cleaners or

aerosol cleaners.

Installation

3

EN

c

b

a

All the functions can be controlled with the remote control handset.

Some functions can also be adjusted with the buttons on the front panel of the set.

POWER

switches the set on from standby or off

to standby.

NUMBER BUTTONS

switches the set on from standby and

selects a programme.

PSM (Picture Status Memory)

recalls your preferred picture setting.

LIST

displays the programme table.

MENU

selects a menu.

ARC

select your desired picture format.

EXIT

exits from each mode.

Q.VIEW

returns to the previously viewed programme.

selects a favourite programme.

TELETEXT BUTTONS (option)

These buttons are used for teletext.

For further details, see the ‘Teletext’

section.

MUTE

switches the sound on or off.

SSM (Sound Status Memory)

recalls your preferred sound setting.

I/II

selects the language during dual lan-

guage broadcast.

selects the sound output (option).

INPUT SELECT

Select TV, AV1, AV2, SAV or PC mode.

DD

/

EE

(Programme Up/Down)

selects a programme or a menu item.

switches the set on from standby.

FF / GG (Volume Up/Down)

adjusts the volume.

adjusts menu settings.

OK

accepts your selection or displays the

current mode.

TV/PC

selects TV or PC mode.

SLEEP

sets the sleep timer.

- COLOURED BUTTONS

These buttons are used for teletext

(only TELETEXT models) or pro-

gramme edit.

Remote control handset

Controls

Before you use the remote

control handset, please

install the batteries.

4

i

?

REVEAL

MIX

INDEX

TIME

UPDATE

MODE

SIZE

HOLD

MENU

INPUT SELECT

SLEEP

VOL

PR

OK

1

3

4 6

7 9

2

5

8

0

I / II

ARC

LIST

EXIT

PR

TEXT

TV/PC

Q.VIEW

X

M

PSM

SSM

EN

The remote control handset is powered by two AAA/Alkaline type batteries.

To insert batteries, turn the remote

control handset over and remove the

battery cover.

Remote control handset

Battery installation

5

1

Put the two batteries into the compart-

ment observing battery polarity.

2

Replace the cover.

3

Note :

To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the remote control hand-

set for an extended period time. Do not use batteries of differing age or type. Always discard of batteries safely.

1. POWER/STANDBY INDICATOR (rr)

illuminates red in standby mode.

illuminates green when the set is switched on.

2. ON/OFF (

rr

)

switches the set on from standby or off to

standby.

Note : Power line lives even when the power

is off.

3. INPUT SELECT

select TV, AV1, AV2, SAV or PC mode.

4. MENU

selects a menu.

5. FF / GG (Volume Up/Down)

adjusts the volume.

adjusts menu settings.

6.

DD

/

EE

(Programme Up/Down)

selects a programme or a menu item.

switches the set on from standby.

7. HEADPHONE SOCKET

Connect the headphone plug to this socket.

8. MAIN POWER (I / O)

switches the set on or off.

Front panel

Controls of

Front panel

6

INPUT INPUT

SELECTSELECT

MENU MENU

INPUT INPUT

SELECTSELECT

MENU MENU

INPUT INPUT

SELECTSELECT

MENU MENU

2

3

4

78

15

6

1. POWER CORD SOCKET

2. RGB INPTUT(PC/DTV INPUT) / L/R IN

Connect the set output socket of the PERSONAL COM-

PUTER to this socket.

3. EURO SCART SOCKET

connect the euro scart socket of the VCR to these sock-

ets.

4. S-VIDEO INPUT

connect video out from an S-VIDEO VCR to the S-

VIDEO input.

5. AERIAL SOCKET

connect the RF socket of the VCR to the aerial sockets.

Connections of

Back panel

7

EN

DC-12VDC-12V

RGB INRGB IN

(PC/DTV INPUT)(PC/DTV INPUT)

L/R INL/R IN

AAV1V1

AAV2 V2

S-VIDEOS-VIDEO

ANTANT IN IN

1

2

3

5

4

8

Connection to

External equipment

NN

PUT)PUT)

L/R INL/R IN

AAV1V1

AAV2 V2

S-VIDEOS-VIDEO

ANTANT IN IN

VCR

Aerial socket

1

S-VIDEO

OUT

IN

(R) AUDIO (L) VIDEO

AAV2 V2

S-VIDEOS-VIDEO

ANTANT IN IN

Watching VCR

2

< Back panel of the set >

< Back panel of the VCR>

You can connect additional equipment, such as VCRs, camcorders etc. to your set. Examples are shown below.

1.Connect the RF out socket of the VCR to the aerial

socket of the set.

2.Connect the aerial cable to the RF aerial in socket of

the VCR.

3.Store the VCR channel on a desired programme num-

ber using the ‘Manual programme tuning’ section.

4.Select the programme number where the VCR channel

is stored.

5.Press the PLAY button on the VCR.

- If you connect an S-VIDEO

VCR to the S-VIDEO input,

the picture quality is

improved ; compared to con-

necting a regular VCR to the

Video input.

If a 4:3 picture format is

used;the fixed imgae may

remain visible on the screen.

- To avoid picture noise (inter-

ference), leave an adequate

distance between the VCR

and set.

1.Use the INPUT SELECT button on the remote control

to select AV1 or AV2.

(If connected to S-VIDEO, select the SAV external input

source.)

2. Insert a video tape into the VCR and press the PLAY

button on the VCR.

(See VCR owner’s manual)

9

EN

Connection to

External equipment

Watching Cable TV

DC-12VDC-12V

RGB INRGB IN

(PC/DTV INPUT)(PC/DTV INPUT)

L/R INL/R IN

AAV1V1

AAV2 V2

S-VIDEOS-VIDEO

ANTANT IN IN

AAV2 V2

S-VIDEOS-VIDEO

ANTANT IN IN

/R IN/R IN

AAV1V1

Cable

TV

(R) AUDIO (L) VIDEO

VCR

RF

Cable

TV

(R) AUDIO (L) VIDEO

VCR

RF

3

Watching external AV source

R L

AUDIO VIDEO

GB INGB IN

V INPUT)V INPUT)

L/R INL/R IN

AAV1V1

AAV2 V2

S-VIDEOS-VIDEO

ANTANT IN IN

4

< Back panel of the set >

< Back panel of the external equipment >

Camcorder

Video game set

< Back panel of the set >

< Cable Box >

For cable Box

After subscribing for a local cable TV station and

installing a converter you can watch cable TV.

For further information of cable TV, contact the local TV

station.

In using connection 1

1.Select programme number in programme switch of

cable box.

2.Match the set programme with selected programme of

cable box.

3. Select your desired programme with the remote control

for cable box.

In using connection 2

1.Use the INPUT SELECT button on the remote control

and select AV1 or AV2.

2.Tune to cable service provided channels using the

cable box.

When connecting the set to an external source,match

the colours of AUDIO/VIDEO input jacks on the set with

the output jacks on the audio/video eqipment : Video =

yellow, Audion(Left) = white, Audio (Right) = red.

1.Use the INPUT SELECT button on the remote control

to select AV1 or AV2.

2.Operate the corresponding external equipment.

See external equipment operating guide.

Connection to

External equipment

10

How to connect

Connect DVD Video or S-Video output to VIDEO or S-VIDEO input and DVD Audio outputs to AUDIO INPUT of the

TV.

How to use

1.Turn on the DVD player, and insert a DVD.

2.Use INPUT SELECT button on the remote control to select AV1 or AV2. Refer to the DVD player's manual for oper-

ating instructions.

Watching DVD

(R) AUDIO (L)

S-VIDEO

RGB IN

(PC/DTV INPUT)

L/R IN

AV1

AV2

S-VIDEO

ANT IN

5

< Back panel of the set >

< Back panel of a DVD player >

EN

Connection to

External equipment

11

1.Connect the signal cable from the monitor output

socket of the PERSONAL COMPUTER to the RGB

INPUT (PC/DTV INPUT) socket of the set.

2.Connect the audio cable from the PC to the L/R IN

sockets of the set.

3.Press the INPUT SELECT button to select PC.

4.Switch on the PC, and the PC screen appears on the

set.

Connecting PC

DC-12VDC-12V

RGB INRGB IN

(PC/DTV INPUT)(PC/DTV INPUT)

L/R INL/R IN

AAV1V1

7

< Back panel of the set >

- To watch digitally broadcast programs, pur-

chase and connect a digital set-top box.

How to connect

Use the set’s RGB jack for video connections,

depending on your set-top box connector. Then,

make the corresponding audio connections.

How to use

1.Turn on the digital set-top box. (Refer to the

owner’s manual for the digital set-top box.)

2.Use INPUT SELECT button on the remote con-

trol to select PC.

Watching DTV

(R) AUDIO (L)

DTV OUTPUT

DC-12VDC-12V

RGB INRGB IN

(PC/DTV INPUT)(PC/DTV INPUT)

L/R INL/R IN

AAV1V1

AAV2 V2

6

< Back panel of the set >

< Back panel of a digital SET-TOP BOX >

1212

Press the FF / GG button to

adjust the volume.

Press the POWER,

DD

/

EE

,

INPUT SELECT or NUM-

BER buttons to switch it on

fully.

Press the POWER button.

The set reverts to standby

mode.

Pull out mains plugs to

switch the set off.

Note : If, while the set is

switched on, the mains plug

is disconnected the set will

switch to standby or power

on when the mains plug is

replaced in the mains power

socket.

Basic operation

1

On and Off

3

Volume adjustment

Press the Q.VIEW button to

view the last programme

you were watching.

Note : This function works

only when Favourite pro-

gramme

is set to Off.

Otherwise each press of this

button will select a stored

favourite programme.

4

Quick view

You can select a programme

number with the DD / EE or

NUMBER buttons.

2

Programme selection

Press the MUTE button. The

sound is switched off and

the display

W

appears.

You can cancel it by press-

ing the MUTE,

FF / GG, SSM,

I/II button.

5

Mute function

The menu can be displayed

on the screen in your

desired language. First

select your language.

Repeatedly press the

MENU button to select the

Special menu.

Press the

DD

/

EE

button to

select

Language.

Press the OK button.

Press the

DD

/

EE

button to

select your desired lan-

guage.

Press the OK button.

All the on screen displays

will appear in the selected

language.

Repeatedly press the

MENU button to return to

normal TV viewing.

6

On screen language

selection (option)

EN

13

The dialogue between you and your set takes place on screen with an operator menu.

The buttons required for the operating steps are also displayed.

Repeatedly press the MENU but-

ton to display each menu.

On screen menus

Menu selection

1

Press the

DD

/

EE

button to select a

menu item.

The selected menu item changes

from white to red.

2

Press the FF / GG button to change

the setting of a menu item or OK

button to display the sub menu.

3

Picture menu

()O}{OOKOMENUOEXIT

Station menu

()OOKOMENUOEXIT

Sound menu

()OOKOMENUOEXIT

Time menu

()O}{OOKOMENUOEXIT

Special menu

()O}{OMENUOEXIT

AutoOprogramme

ManualOprogramme

Program meOedit

FavouriteOprogramme

CSM Normal

Contrast 100

Brightness 95

Colour 85

Sharpness 80

Equalizer

Balance 0

AVL Off

Clock

-i-i:i-i-

AM

OffOtime

-i-i:i-i-

AM

Off

OnOtime

-i-i:i-i-

AM

Pr. 1

VOL. 30

Off

Input TV

ChildOlock Off

AutoOsleep Off

Language

1414

Up to 100 TV stations can be stored in this set by programme numbers (0 to 99). Once you have preset the stations, you will

be able to use the

DD

/

EE

or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using auto-

matic or manual modes.

All stations that can be received are stored by this method. It is recommended that you use auto programme during instal-

lation of this set.

Repeatedly press the

MENU button to

select the Station

menu.

Setting up TV stations

Auto programme tuning

1

Press the

DD

/

EE

button to select Auto pro-

gramme

.

Press the OK button to display the

Auto pro-

gramme

menu.

Press the

DD

/

EE

button to select System.

Select a TV system with the

FF / GG button;

L : SECAM L/L’ (France)

BG : PAL B/G, SECAM B/G (Europe/East

Europe)

I : PAL I/II (U.K./Ireland)

DK: PAL D/K, SECAM D/K (East Europe)

Press the

DD

/

EE

button to select Storage

from

.

Select the beginning programme number with

the

FF / GG button or NUMBER buttons. Any

number under 10 is entered with a numeric Ô

0Õ

in front of it, i.e. Ô

05Õ for 5.

Press the OK button.

2

Press the

DD

/

EE

button to select Start.

Press the OK button to begin auto program-

ming.

All receivable stations are stored. The station

name is stored for stations which broadcast

VPS (Video Programme Service), PDC

(Programme Delivery Control) or TELETEXT

data. If no station name can be assigned to a

station, the channel number is assigned and

stored as

C (V/UHF 01-69) or S (Cable 01-47),

followed by a number.

To stop auto programming, press the MENU

button.

When auto programming is completed, the

Programme edit menu appears on the

screen. See the ‘Programme edit’ section to

edit the stored programme.

Repeatedly press the MENU button to return

to normal TV viewing.

3

()O}{OMENUOEXIT

MENU

1

2%

System BG

Storage Ofrom 1

Start

System BG

Storage Ofrom 1

Start

System BG

StorageOfrom 1

Start CO002

EN

15

Manual programme lets you manually tune and arrange the stations in whatever order you desire.

Also you can assign a station name with five characters to each programme number.

Setting up TV stations

Manual programme tuning

Repeatedly press

the MENU button to

select the Station

menu.

Press the

DD

/

EE

button to select Manual pro-

gramme

.

Press the OK button to display the Manual pro-

gramme

menu.

Press the

DD

/

EE

button to select Storage.

Select the desired programme number (0 to 99)

with the FF / GG button or NUMBER buttons. Any

number under 10 is entered with a numeric Ô0Õ in

front of it, i.e. Ô05Õ for 5.

Press the OK button.

Press the

DD

/

EE

button to select System.

Select a TV system with the FF / GG button on the

System pull-down menu;

L : SECAM L/L’ (France)

BG : PAL B/G, SECAM B/G (Europe/East Europe)

I : PAL I/II (U.K./Ireland)

DK : PAL D/K, SECAM D/K (East Europe)

Press the OK button.

1

2

Press the

DD

/

EE

button to select Channel.

Press the FF / GG button to select V/UHF or

Cable on the Channel pull-down menu.

If possible, select the channel number

directly with the number buttons. Any num-

ber under 10 is entered with a numeric Ô0Õ

in front of it, i.e. Ô05Õ for 5.

Press the OK button.

Press the

DD

/

EE

button to select Search.

Press the FF / GG button to commence

searching on the Search pull-down menu.

If a station is found the search will stop.

Press the OK button to store it. The display

Stored will appear.

Repeatedly press the MENU button to

return to normal TV viewing.

3

()OOKOMENUOEXIT

()O}{O0

-

9OOKOMENUOEXIT

Stored

AutoOprogramme

ManualOprogramme

Program meOedit

FavouriteOprogramme

Storage 1

System BG

Channel V®UHF 1

Fine {{{

Search

Name CO01

Storage 1

System BG

Channel V®UHF 1

Fine {{{

Search

Name CO01

1616

Setting up TV stations

Manual programme tuning

Repeatedly press the MENU button to select the Station

menu.

Press the

DD

/

EE

button to select Manual programme.

Press the OK button to display the Manual programme

menu.

Press the

DD

/

EE

button to select Name.

Press the GG button and then

DD

/

EE

button to use a blank,

+, -, the numeric 0 to 9 and the alphabet A to Z.

Select the next position by pressing the FF / GG button and

then make your choice of the second character, and so on.

Press the OK button.

Repeatedly press the MENU button to return to normal TV

viewing.

4

Repeatedly press the MENU button to select the Station

menu.

Press the

DD

/

EE

button to select Manual programme.

Press the OK button to display the Manual pro-

gramme

menu.

Press the

DD

/

EE

button to select Fine.

Press the FF / GG button to fine tune for the best picture

and sound.

Press the OK button.

Repeatedly press the MENU button to return to normal

TV viewing.

The finely tuned programme will be indicated by a yellow

number during programme selection.

()O}{OOKOMENUOEXIT

()OOKOMENUOEXIT

Fine tuning

AutoOprogramme

ManualOprogramme

Program meOedit

FavouriteOprogramme

Storage 1

System BG

Channel V®UHF 1

Fine {{{

Search

Name CO01

EN

17

This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme

numbers or insert a blank station data into the selected programme number.

Setting up TV stations

Programme edit

Repeatedly press

the MENU button to

select the Station

menu.

Press the

DD

/

EE

but-

ton to select

Programme edit.

Press the OK button

to display the

Programme edit

menu.

1

Select a programme to be delet-

ed with the

DD

/

EE

or FF / GG but-

ton.

Press the RED button twice.

The selected programme is

deleted, all the following pro-

grammes are shifted up one

position.

2

3

4

Deleting a programme

Select a programme to be

copied with the

DD

/

EE

or FF / GG

button.

Press the GREEN button.

All the following programmes

are shifted down one position.

5

Copying a programme

MENU

Delete

()OOKOMENUOEXIT

()O}{OOKOMENUOEXIT

AutoOprogramme

ManualOprogramme

Program meOedit

FavouriteOprogramme

00O CO 1DOO 05O SO 69

01O CO 03OO 06O SO 17

02O CO 12OO 07O SO 22

03O SO 66OO 08O CO 09

04O SO 67OO 09O CO 11

Delete Copy

Move Skip

00O CO 1DOO 05O SO 69

01O CO 03OO 06O SO 17

02O CO 12OO 07O SO 22

03O SO 66OO 08O CO 09

04O SO 67OO 09O CO 11

Select a programme to

be moved with the

DD

/

EE

or FF / GG button.

Press the YELLOW but-

ton.

Move the programme to

the desired programme

number with the

DD

/

EE

or FF / GG button.

Press the YELLOW but-

ton again to release this

function.

Moving a programme

Select a programme number to be

skipped with the

DD

/

EE

or FF / GG but-

ton.

Press the BLUE button. The

skipped programme turns to blue.

Press the BLUE button again to

release the skipped programme.

When a programme number is

skipped it means that you will be

unable to select it using the

DD

/

EE

button during normal TV viewing.

If you want to select the skipped

programme, directly enter the pro-

gramme number with the NUM-

BER buttons or select it in the pro-

gramme edit or table menu.

Repeatedly press the MENU but-

ton to return to normal TV viewing.

Skipping a programme number

()O}{OMENU

Move0Off

00O CO 1DOO 05O SO 69

01O CO 03OO 06O SO 17

02O CO 12OO 07O SO 22

03O SO 66OO 08O CO 09

04O SO 67OO 09O CO 11

18

Press the LIST button to display the Programme table menu.

The programme table appears on the screen. One programme table

contains ten programmes as below.

Note :

a. You may find some blue programmes. They have been set up to be

skipped by auto programming or in the programme edit mode.

b. Some programmes with the channel number shown in the pro-

gramme table indicate there is no station name assigned.

Displaying programme table

Select a programme with the

DD

/

EE

or FF / GG button.

Then press the OK button.

The set switches to the chosen programme number.

Selecting a programme in the programme table

There are 10 programme table pages in which contain 100 pro-

grammes.

Pressing the

DD

/

EE

or FF / GG button repeatedly turns the pages.

Repeatedly press the MENU button to return to normal TV viewing.

Paging through a programme table

You can check the programmes stored in the memory by displaying the

programme table.

()O}{OOKOMENU

18

Setting up TV stations

Programme edit

This function lets you select your favourite pro-

grammes directly.

Repeatedly press the MENU button to select

the

Station menu.

Press the

DD

/

EE

button to select Favourite

programme

.

Press the OK button to display the

Favourite

programme

menu.

Press the

FF / GG button to select On or Off.

Press the

DD

/

EE

button to select -- -----.

Select a desired programme with the

FF / GG but-

ton or NUMBER buttons. Any number under 10

is entered with a numeric Ô

0Õ in front of it, i.e. Ô05Õ

for 5.

You can store up to 5 programmes.

Repeatedly press the MENU button to return to

normal TV viewing.

Repeatedly press the Q.VIEW button to select

stored favourite programmes.

Favourite programme Calling the programme table

Press the LIST button to display the Programme table menu.

The programme table appears on the screen. One programme table

contains ten programmes as below.

Note :

a. You may find some blue programmes. They have been set up to be

skipped by auto programming or in the programme edit mode.

b. Some programmes with the channel number shown in the pro-

gramme table indicate there is no station name assigned.

Displaying programme table

Select a programme with the

DD

/

EE

or FF / GG button.

Then press the OK button.

The set switches to the chosen programme number.

Selecting a programme in the programme table

There are 10 programme table pages in which contain 100 pro-

grammes.

Pressing the

DD

/

EE

or FF / GG button repeatedly turns the pages.

Repeatedly press the MENU button to return to normal TV viewing.

Paging through a programme table

You can check the programmes stored in the memory by displaying the

programme table.

Calling the programme table

Press the LIST button to display the Programme table menu.

The programme table appears on the screen. One programme table

contains ten programmes as below.

Note :

a. You may find some blue programmes. They have been set up to be

skipped by auto programming or in the programme edit mode.

b. Some programmes with the channel number shown in the pro-

gramme table indicate there is no station name assigned.

Displaying programme table

Select a programme with the

DD

/

EE

or FF / GG button.

Then press the OK button.

The set switches to the chosen programme number.

Selecting a programme in the programme table

There are 10 programme table pages in which contain 100 pro-

grammes.

Pressing the

DD

/

EE

or FF / GG button repeatedly turns the pages.

Repeatedly press the MENU button to return to normal TV viewing.

Paging through a programme table

You can check the programmes stored in the memory by displaying the

programme table.

Calling the programme table

Press the LIST button to display the Programme table menu.

The programme table appears on the screen. One programme table

contains ten programmes as below.

Note :

a. You may find some blue programmes. They have been set up to be

skipped by auto programming or in the programme edit mode.

b. Some programmes with the channel number shown in the pro-

gramme table indicate there is no station name assigned.

Displaying programme table

Select a programme with the

DD

/

EE

or FF / GG button.

Then press the OK button.

The set switches to the chosen programme number.

Selecting a programme in the programme table

There are 10 programme table pages in which contain 100 pro-

grammes.

Pressing the

DD

/

EE

or FF / GG button repeatedly turns the pages.

Repeatedly press the MENU button to return to normal TV viewing.

Paging through a programme table

You can check the programmes stored in the memory by displaying the

programme table.

Calling the programme table

()O}{OOKOMENUOEXIT

000off

000

__0_____

000

__0_____

000

__0_____

000

__0_____

000

__0_____

00O CO 1DOO 05O SO 69

01O CO 03OO 06O SO 17

02O CO 12OO 07O SO 22

03O SO 66OO 08O CO 09

04O SO 67OO 09O CO 11

EN

19

Picture adjustment

Repeatedly press the MENU button to select the Picture

menu.

Press the

DD

/

EE

button to select the desired picture item.

Press the FF / GG button to make appropriate adjustments.

Press the OK button to store it for the picture User.

The display Stored appears.

Repeatedly press the MENU button to return to normal TV

viewing.

You can also recall a desired picture (Dynamic,

Standard, Mild, Game or User) with PSM button on the

remote control.

The picture Dynamic, Standard, Mild and Game are

programmed for optimum picture reproduction at the factory

and cannot be changed.

2

Picture adjustment

To initialize values (reset to default settings), select

the Normal option. When adjusting color tempera-

ture options (red, green or blue) manually, CSM is

automatically changed to User.

Press the MENU button and then

DD / EE

button to

select the PICTURE menu.

Press the GG button and then

DD / EE

button to select

CSM.

Press the GG button and then

DD / EE

button to select the

desired colour temperature.

Press the MENU button to save.

1

CSM (Colour Status Memory)

CSM Normal

Contrast 100

Brightness 95

Colour 85

Sharpness 80

()OOKOMENUOEXIT

CSM Normal

Contrast 100

Brightness 95

Colour 85

Sharpness 80

You can adjust picture contrast, brightness, colour intensity, sharpness and tint (NTSC AV only) to the levels you prefer.

2020

Picture adjustment

You can watch TV in various picture formats; 16:9, 14:9, 4:3, Zoom 1, Zoom 2, Auto.

Repeatedly press the ARC button to select your desired picture format.

1. Press the ARC button to select a desired picture format.

• Each press of ARC button changes the screen display as shown below.

• You can also select 16:9, 14:9, 4:3, Zoom 1, Zoom 2, Auto in the SCREEN menu.

Note :

a. 16:9

and

4:3

are available in PC mode only.

b. If 4:3 is on the screen for a long time, that fixed image may remain visible.

3

Picture format

16 : 9

Auto

14 : 9

4 : 3

Zoom 2 Zoom 1

16 : 9

Auto

14 : 9

4 : 3

Zoom 2 Zoom 1

Seite laden ...

Hyundai HLT-1711 Bedienungsanleitung

Hyundai HLT-1711 Bedienungsanleitung

in anderen Sprachen

Sonstige Unterlagen