Simplicity MULTI-LANGUAGE OPERATOR'S MANUAL, YARD KING RIDING MOWER 17.5/22HP 46" Benutzerhandbuch

Kategorie
Rasenmäher
Typ
Benutzerhandbuch
7102894
Revision A
Operator’s Manual
Riding Mower
Model No. Description
7800415 EYK175460 Yard King Riding Mower, 17.5HP, 46"
7800416 EYK22460 Yard King Riding Mower, 22HP, 46"
en
Operator’s Manual – Riding mower
cs
Návod k použití – Malotraktor se sekačkou
da
Betjeningsvejledning – Plæneklipper
de
Bedienungsanleitung Rasenmähertraktor
et
Kasutajajuhend Muruniidutraktor
fi
Käyttöohje – Ajettava ruohonleikkuri
fr
Manuel d’utilisation – Tondeuse autoportée
hu
Használati útmutató – Fűnyíró traktor
it
Manuale per l’operatore – Motofalciatrice
lt
Operatoriaus vadovas – Vejos pjovimo traktorius
lv
Operātora rokasgrāmatā – Zāles pļāvējs – raiders
nl
Gebruikershandleiding Zitmaaier
no
Bruksanvisning – Plentraktor
pl
Instrukcja obsługi – Kosiarka traktorowa
sk
Návod na obsluhu – Pojazdná kosačka
Not for
Reproduction
Thank you
for purchasing this quality-built YARD KING mower. We are pleased that you’ve placed your confidence in the
YARD KING brand. When operated and maintained according to the instructions in this manual, your YARD KING mower will
provide many years of dependable service.
This manual contains
safety information to make you aware of the hazards and risks associated with mowers and how
to avoid them. Because Briggs & Stratton Power Products Group, LLC does not necessarily know all the applications this
mower could be used for, it is important that you read and understand these instructions. Save these original instructions for
future reference.
This mower requires final assembly before use.
Refer to the
Assembly
section of this manual for instructions on final
assembly procedures. Follow the instructions completely.
Where to Find Us
You never have to look far to find Briggs & Stratton support and service for your mower. There are over 30,000 Briggs &
Stratton authorized service dealers worldwide who provide quality service. You can also contact Briggs & Stratton Customer
Service by phone at (800) 528-5087, or on the Internet at www.murray.com.
Mower
Model Number _____________________________________
Serial Number _____________________________________
Engine
Model Number _____________________________________
Serial Number _____________________________________
Date Purchased
_____________________________________
Briggs & Stratton Power Products Group, LLC
P.O. Box 702
Milwaukee, WI 53201-0702
Copyright © 2010 All rights reserved. No part of this material may be reproduced
or transmitted in any form without the express written permission of
Briggs & Stratton Power Products Group, LLC.
YARD KING is a trademark of Briggs & Stratton Power Products Group, LLC
Not for
Reproduction
1
1
A B C D
E F G H
IJ K L
2
A B C D E F G H
J K L M N O
3
(#1) (#2) (#3)
(#5) (#6) (#7)
(#8)
(#4)
Not for
Reproduction
2 murray.com
4
A
D
E
(#6)
B
C
(#5)
8
B
A
7101936
D
A B C
10
6
D
D
(#1)
(#8)
F
E
C
B
G
A
(#2)
5
A
(#3)
(#4)
D
B
E
C
H
G
F
C
7101935
A B
9
7
C
F
E
B
G
A
D
Not for
Reproduction
3
English Cesky Dansk
Nederlands
Eesti Suomi FrançaisDeutsch Angol Italiano Latviešu
Lietuvių
Norsk Polski
Slovenščina
Table of Contents
Operator Safety .................................. 4
International Pictorials ...................................... 4
Responsibility of the Owner .................................. 4
Safe Operation Practices .................................... 5
Assembly ....................................... 7
Seat ..................................................... 7
Steering Wheel ............................................ 7
Maintenance Free Battery ................................... 7
Important! Before You Start Mowing ........................... 8
Features and Controls ............................ 9
Location of Controls ........................................ 9
Attachments .............................................. 9
Operation ....................................... 10
Safety Interlock System Tests ................................ 10
Using Controls ............................................ 10
Driving and Stopping the Unit ................................ 10
Mowing .................................................. 12
Before Starting the Engine ................................... 12
Mowing and Bagging Tips ................................... 13
Maintenance .................................... 14
Maintenance Chart ......................................... 14
Check Tire Pressure ........................................ 15
Maintenance Free Battery ................................... 15
Storage .................................................. 15
Order Replacement Parts ................................... 15
Troubleshooting ................................. 16
Warranty ........................................ 18
Specifications ................................... 19
WARNING
Battery posts, terminals and related accessories contain
lead and lead compounds, chemicals known to the State
of California to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.
WARNING
Engine exhaust, some of its constituents, and certain
vehicle components contain or emit chemicals known
to the State of California to cause cancer or other
reproductive harm.
Not for
Reproduction
4 murray.com
Operator Safety
International Pictorials
IMPORTANT:
The following pictorials are lo cated on
your unit or on literature supplied with the product. Before
you operate the unit, learn and understand the purpose for
each pictorial.
NOTE:
Illustrations and pictorials begin on page 1.
Safety Warning Pictorials (Figure 1)
A - WARNING.
B - IMPORTANT: Read Owner’s Manual Before Operating
This Machine.
C - WARNING: Thrown Objects. Keep Bystanders Away.
Read User Instructions Before Operating This Machine.
D - WARNING: Do Not Use This Machine On Slopes Greater
Than 10 Degrees.
E - DANGER: No Step.
F - DANGER: Keep People, Especially Children, Away From
Unit.
G - DANGER: Keep Feet And Hands Away From Rotating
Blade.
H - WARNING: Hot Surface.
I - DANGER: Disconnect Spark Plug Wire Before Servicing
Unit.
J - WARNING: Use Caution When Connecting Or
Disconnecting Accessories.
K - WARNING: Crushed Fingers.
L - WARNING: Stay Clear Of Mower Blade As Long As
Engine Is Running.
Control and Operating Pictorials (Figure 2)
A - Engine Start
B - Lights
C - Engine Stop
D - Engine Run
E - Brake
F - Parking Brake
G - Clutch
H - Slow
J - Fast
K - Choke
L - Oil
M - Blade Rotation Control
N - Raise
O - Fuel
Responsibility Of The Owner
Know your product:
If you understand the unit and how
the unit operates, you will get the best performance. As you
read this manual, compare the illustrations to the unit. Learn
the location and the function of the controls. To help prevent
an accident, follow the operating instructions and the safety
rules. Keep this manual for future reference.
WARNING: Look for this symbol to indicate
important safety precautions. This symbol
indicates: “Attention! Become Alert! Your
Safety Is At Risk.”
WARNING: This cutting machine is capable
of amputating hands and feet and throwing
objects. Failure to observe the following
safety instructions could result in serious
injury or death to the operator
or bystanders.
It is important that you read and understand these
instructions thoroughly before attempting to start or
operate the equipment. Save these original instructions for
future reference.
Not for
Reproduction
5
Safe Operation Practices
For Ride-On (Riding) Rotary Mower Machines
Training
Read the instructions carefully. Be familiar with the controls
and the proper use of the equipment.
Never allow children or people unfamiliar with these 1. instructions to use the mower. Local regulations may
restrict the age of the operator.
Never mow while people, especially children, or pets 2. are nearby.
Keep in mind that the operator or user is responsible 3. for accidents or hazards occur ring to other people or
their property.
Do not carry passengers.4.
All drivers should seek and obtain pro fessional 5. and practical instruction. Such instruction
should emphasize:
the need for care and concentration when working a. with ride-on machines;
control of a ride-on machine sliding on a slope will a. not be regained by the application of the brake. The
main reasons for loss of control are:
insufficient wheel grip;
being driven too fast;
inadequate braking;
the type of machine is unsuitable for its task;
lack of awareness of the effect of ground conditions, especially slopes;
incorrect hitching and load dis tribution.
Preparation
While mowing, always wear substantial footwear and 1. long trousers. Do not operate the equipment when
barefoot or wearing open sandals.
Thoroughly inspect the area where the equipment is to 2. be used and remove all ob jects which may be thrown
by the machine.
WARNING – Petrol is highly flammable.
3.
Store fuel in containers specifically de signed for a. this purpose.
Refuel outdoors only and do not smoke b. while refuelling.
Add fuel before starting the engine. Never remove c. the cap of the fuel tank or add petrol while the
engine is run ning or when the engine is hot.
If petrol is spilled, do not attempt to start the engine d. but move the machine away from the area of
spillage and avoid creating any source of ignition
until petrol vapours have dissipated.
Replace all fuel tanks and container caps securely.e.
Replace faulty silencers.4.
Before using, always visually inspect to see that the 5. blades, blade bolts and cutter as sembly are not worn or
damaged. Replace worn or damaged blades and bolts
in sets to preserve balance.
On multi-blade machines, take care as ro tating one 6. blade can cause other blades to rotate.
Operation
Do not operate the engine in a confined space where 1. dangerous carbon monoxide fumes can collect.
Mow only in daylight or in good artificial light.2.
Before attempting to start the engine, dis engage all 3. blade attachment clutches and shift into neutral.
Do not use on slopes of more than 10 de grees.4.
Remember there is no such thing as a “safe” slope. 5. Travel on grass slopes re quires particular care. To
guard against overturning:
do not stop or start suddenly when going up a. or downhill;
engage clutch slowly, always keep machine in gear, b. especially when tra velling downhill;
machine speeds should be kept low on slopes and c. during tight turns;
stay alert for humps and hollows and other d. hidden hazards;
never mow across the face of the slope, unless the e. mower is designed for this purpose.
Not for
Reproduction
6 murray.com
Operation (Continued)
Use care when pulling loads or using heavy equipment.6.
Use only approved drawbar hitch points.a.
Limit loads to those you can safely control.b.
Do not turn sharply. Use care when reversing.c.
Use counterweight(s) or wheel weights when d. suggested in the In struction Book.
Watch out for traffic when crossing or near roadways.7.
Stop the blades rotating before crossing surfaces other 8. than grass.
When using any attachments, never direct discharge of 9. material toward bystanders nor allow anyone near the
machine while in operation.
Never operate the mower with defective guards or 10. shields, or without safety protec tive devices in place.
Do not change the engine governor set tings or 11. overspeed the engine. Operating an engine at
excessive speed may in crease the hazard of
personal injury.
Before leaving the operator’s position:12.
disengage the power take-off and lower a. the attachments;
change into neutral and set the park ing brake;b.
stop the engine and remove the key.c.
Disengage drive to attachments, stop the engine, 13. and disconnect the spark plug wire(s) or remove the
ignition key:
before cleaning blockages or unclog ging chute;a.
before checking, cleaning or working on the mower;b.
after striking a foreign object. Inspect the mower c. for damage and make re pairs before restarting and
operating the equipment;
if the machine starts to vibrate abnor mally d. (check immediately).
Disengage drive to attachments when transporting or 14. not in use.
Stop the engine and disengage drive to at tachment:15.
before refuelling;a.
before removing the grass catcher;b.
before making height adjustment un less adjustment c. can be made from the operator’s position.
Reduce the throttle setting during engine run-out and, if 16. the engine is provided with a shut-off valve, turn the fuel
off at the con clusion of mowing.
Before and when backing, look 17.
behind and down
for
small children.
Use extra care when approaching blind corners, shrubs, 18. trees or other objects that may obscure vision.
Maintenance And Storage
On multi-blade machines, take care as ro tating one 1. blade can cause other blades to rotate.
When machine is to be parked, stored or left 2. unattended, lower the cutting means unless a positive
mechanical lock is used.
Keep all nuts, bolts, and screws tight to be sure the 3. equipment is in safe working condition.
Never store the equipment with petrol in the tank inside 4. a building where fumes may reach an open flame
or spark.
Allow the engine to cool before storing in any enclosure.5.
To reduce the fire hazard, keep the engine, silencer, 6. battery compartment and petrol storage area free of
grass, leaves, or ex cessive grease.
Check the grass catcher frequently for wear 7. or deterioration.
Replace worn or damaged parts for safety.8.
If the fuel tank has to be drained, this should be 9. done outdoors.
Not for
Reproduction
7
Assembly
All fasteners are in the parts bag. Do not discard any parts or
material until the unit is assembled.
WARNING: Before doing any as sembly or
maintenance to the mower, remove the wire
from the spark plug.
NOTE:
In this instruction book, left and right describe the
location of a part with the oper ator on the seat.
NOTE:
Illustrations and pictorials begin on page 1.
NOTE:
To assemble the following loose parts, use the
fasteners shown at full size in Figure 3.
Seat
How To Install The Seat
(Figure 4) Carefully remove the plastic bag from the 1.
seat (A)
.
Align the holes in the 2.
seat hinge (B)
to the holes in
the
seat (A)
. Fasten the
seat (A)
to the
seat hinge
(B)
with the
fasteners (C)
and
(D)
.
Check the operating position of the 3.
seat (A)
. If the
seat (A)
needs to be adjusted, loosen the two
wing
bolts (C)
. Slide the
seat (A)
for ward or backward
along the
seat adjusting holes (E)
. Tighten the
wing bolts (C)
.
Steering Wheel
How To Assemble The Steering Wheel
Make sure the front wheels point forward.1.
(Figure 5) Slide the 2.
bellows (F)
over the
steering
post (G)
.
NOTE: Before attachment of the steering wheel,
make sure that the front wheels point forward and are
straight. For proper alignment of the steering wheel, see
Figure 5
(H).
Slide the 3.
steering wheel (E)
onto the
steering
post (G)
.
Use the 4.
screw (C)
and
washer (D)
to secure the
steering wheel. Tighten the screw until snug and then
add 1/4 turn. DO NOT over tighten.
Attach the 5.
cover (A)
to the
steering wheel (E)
.
Some models have an 6.
optional
decal (B)
in the
parts bag. Attach the
decal (B)
to the center of the
steering wheel (E)
as shown.
Maintenance Free Battery
IMPORTANT: Before you attach the battery cables
to the battery, check the battery date. The battery
date tells if the battery must be charged.
(Figure 6) Check the top and the side of the 1.
battery
(E)
for the location of the battery date.
If the 2.
battery (E)
is put into service before the battery
date, the battery cables can be attached with out
charging the
battery (E)
. See “How To Install The
Battery Cables”.
If the 3.
battery (E)
is put into service after the battery
date, the
battery (E)
must be charged. See “How To
Charge The Battery”.
How To Charge The Battery
WARNING: When you charge the battery, do
not smoke. Keep the bat tery away from any
sparks. The fumes from the battery can
cause an explosion.
(Figure 6) Remove the 1.
battery (E)
and
battery
tray (F)
.
Remove the protective cap from the battery terminal.2.
Use a 12 volt battery charger to charge the 3.
battery
(E)
. Charge at a rate of 6 amperes for one hour. If
you do not have a battery charger, have an authorized
service center charge the battery.
Install the 4.
battery (E)
and
battery tray (F)
. Make
sure the
positive (+) terminal (B)
is on the left side.
How To Install The Battery Cables
WARNING: To prevent sparks, fasten the
red cable to the positive (+) ter minal before
you connect the black cable.
Remove the protective cap from the battery terminals.1.
(Figure 6) Slide the 2.
terminal cover (G)
onto the
red
cable (C)
. Fasten the
red cable (C)
to the
positive
(+) terminal (B)
with the
fasteners (A)
and
(D)
.
Fasten the black cable to the negative (-) terminal with 3. the
fasteners (A)
and
(D)
.
Not for
Reproduction
8 murray.com
Important! Before You Start Mowing
Check the engine oil.
Fill the fuel tank with petrol.
Check the air pressure of the tires.
Check the level of the mower hous ing.
Attach the battery cables.
Check Tire Pressure
Check the air pressure in the tires. Tires with too much air
pressure will cause the unit to ride rough. Also, the wrong
air pressure will keep the mower housing from cutting level.
The correct air pressure is: Front Tires 0,97 BAR (14 PSI),
Rear Tires 0,69 BAR (10 PSI). The tires were over-inflated
for shipment.
How To Prepare The Engine
NOTE: The engine was shipped from the fac tory filled with
oil. Check the level of the oil. Add oil as needed.
See the engine manufacturer’s instructions for the type
of petrol and oil to use. Before you use the unit, read the
information on safety, oper ation, maintenance, and storage.
WARNING: Follow the
engine
manufacturer’s
instructions for the type of petrol and oil to
use. Always use a safety petrol container.
Do not smoke when adding petrol to the
engine. When inside an enclosure, do not
fill with petrol. Before you add petrol, stop
the engine. Let the engine cool for
several minutes.
Not for
Reproduction
9
Features and Controls
NOTE: Illustrations and pictorials begin on page 1.
Location of Controls (Figure 7, Figure 9)
Lift Lever (A)
— Use the lift lever to change the height
of cut.
Brake Pedal (B)
— Use the brake pedal to quickly stop.
Throttle Control Lever (C)
— Use the throttle control
lever to increase or decrease the speed of the engine.
Headlight Switch (D)
— The headlight switch is the first
part of the ignition switch. To use the lights with the engine
running, turn the key to the position for the lights.
Ignition Switch (D)
— Use the ignition switch to start and
stop the engine.
Parking Brake Lever (E)
— Use the parking brake lever
to engage the brake when you leave the unit.
Blade Rotation Control (F)
— Use the blade rota tion
control to start and stop the rotation of the blade.
Speed Control Pedal (G)
— Use the speed con trol
pedal to change the speed and the direction of the unit.
(Figure 9)
Automatic Drive Disconnect (C)
— Use the
automatic drive disconnect to disengage the transmission.
Attachments
This unit can use many different attachments. This unit
can pull attachments like a lawn sweeper, a lawn aerator,
or a hopper spreader. This unit can not use attachments
that engage the ground like a plough, a disk harrow, or
a cultivator.
For trailer and pull-behind attachments, the maximum weight
is 113 kg (250 lbs).
Not for
Reproduction
10 murray.com
Operation
Safety Interlock System Tests
WARNING: This unit is equipped with safety
interlock switches and other safety devices.
These safety systems are present for your
safety. Do not attempt to bypass safety
switches, and never tamper with
safety devices.
Test 1 — Engine should NOT start if:
Blade rotation control is in the ENGAGE position, OR
Brake pedal is NOT fully depressed (parking brake OFF).
Test 2 — Engine SHOULD start if:
Operator is sitting in seat, AND
Blade rotation control is in the DISENGAGE position, AND
Brake pedal is fully depressed (parking brake ON).
Test 3 — Engine should SHUT OFF if:
Operator rises off seat.
Test 4 — Check Blade Brake Stopping Time
Mower blades and mower drive belt should come to a
complete stop within five seconds after blade rotation control
is moved to DISENGAGE position. If the mower drive belt
does not stop within five seconds, see your dealer.
WARNING: If the unit does not pass a safety
test, do not operate it. See your
authorized dealer.
Using Controls
How To Use The Throttle Control
(Figure 7) Use the
throttle control (C)
to increase or
de crease the speed of the engine.
The FAST position is marked with a detent. For normal 1. operation and when using a grass bagger, move the
throttle control to the FAST position. For maximum
charging of the battery and for a cooler running engine,
oper ate the engine in the FAST position.
The engine governor is set at the factory for maximum 2. performance. Do not adjust the governor to increase the
speed of the en gine.
How To Use The Blade Rotation Control
(Figure 7) Use the
blade rotation control (F)
to engage
the blade(s).
Before you start the engine, make sure the 1.
blade
rotation control (F)
is in the DISEN GAGE position.
Move the 2.
blade rotation control (F)
to the
ENGAGE position (fully forward) to rotate the blade(s).
NOTE:
If the engine stops when you en gage the
blade(s), the seat switch is not activated. Make sure
you sit in the middle of the seat.
Move the 3.
blade rotation control (F)
to the
DISENGAGE position to stop the blade(s). Before you
leave the operator’s position, make sure the blade(s)
has stopped rotating.
Before you ride the unit across a sidewalk or a road, 4. move the
blade rotation control (F)
to the
DISENGAGE position.
WARNING: Always keep your hands and
feet away from the blade, deflector opening,
and the mower housing when the
engine runs.
How To Use The Speed Control Pedal
The drive system uses a Hydrostatic Automatic Drive
transmission. The Hydrostatic trans mission is very easy to
operate. This type of drive system does not require a shift
lever or a clutch pedal.
(Figure 7) The speed and direction of travel is controlled by a
single
speed control pedal (G)
operated with your right
foot. Do not use the brake pedal in normal operation. Only
use the brake pedal to quickly stop in an emergency.
Driving And Stopping The Unit
How To Drive Forward
(Figure 9) The 1.
automatic drive discon nect (C)
must be in the
DRIVE position (B)
.
Slowly release your left foot from the brake pedal.2.
Move the throttle control to the FAST posi tion.3.
(Figure 10) Slowly push the 4.
speed control pedal
(D)
forward (C)
to attain the desired speed.
To reduce forward speed, slowly 5.
release (B)
the
speed control pedal (D)
until the unit slows to the
desired speed.
Not for
Reproduction
11
How To Drive In Reverse
Look to the rear.1.
(Figure 10) Slowly push the 2.
speed control pedal
(D)
to the
REVERSE position (A)
.
How To Change Directions
CAUTION: To change directions, do not use the
brake pedal. Use only the speed con trol pedal.
(Figure 10) Slowly remove your foot from the 1.
speed
control pedal (D)
. The
speed control pedal
(D)
will automatically return to the
NEUTRAL
position (B)
.
When the unit stops, slowly move the 2.
speed control
pedal (D)
to the desired direction.
Speed Control Pedal Positions
(Figure 10) The forward speed is controlled by the
position of the
speed control pedal (D)
. The following
chart provides functions along with the pedal positions.
Always operate the engine with the throttle control in the
FAST position.
Function Pedal Positon Throttle Position
Trimming
Snow Thrower 1/3 Fast Throttle
Bagging Grass 1/3 to 1/2
Normal Mowing 1/2 to 2/3
Easy Mowing
Snow Blade 1/2 to 3/4
Transport FULL
Pull Behind
Attachments 1/3 to 1/2
How To Disconnect The Transmission
(Figure 9) To push the unit, use the
automatic drive
disconnect (C)
to release the transmission. The engine
must be off.
Move and latch the 1.
automatic drive dis connect
(C)
in the
PUSH position (B)
. The transmission is
now released and the unit can be pushed.
NOTE:
In cold weather, the heavy viscos ity oil in the
transmission will make the unit difficult to push.
To engage the transmission, unlatch the 2.
automatic
drive dis connect (C)
. The trans mission is now
connected and ready to operate.
How To Use The Parking Brake
(Figure 7) Push the 1.
brake pedal (B)
fully forward.
Lift the 2.
parking brake lever (E)
.
Remove your foot from the 3.
brake pedal (B)
and then
release the
parking brake lever (E)
. Make sure the
parking brake will hold the unit stationary.
To release the 4.
parking brake lever (E)
, push the
brake pedal (B)
fully forward. The park ing brake
lever will automatically release.
WARNING: Before you leave the operator’s
position, set the parking brake. Move the
blade rotation con trol to the DISENGAGE
position. Stop the engine and remove the
ignition key.
How To Change The Cutting Height
(Figure 7) To change the cutting height, raise or lower the
lift
lever (A)
as follows.
Move the 1.
lift lever (A)
forward to lower the mower
housing and back to raise the mower housing.
When you ride on a sidewalk or road, move the 2.
lift
lever (A)
fully back (to the highest position) and move
the blade rotation control to the
DIS ENGAGE
position.
Not for
Reproduction
12 murray.com
How To Stop The Unit
(Figure 7) Slowly remove your foot from the 1.
speed
control pedal (G)
. The
speed control pedal (G)
will automatically return to the NEUTRAL position and
the unit will stop.
Move the 2.
blade rotation control (F)
to the
DISENGAGE position.
Set the 3.
parking brake (E)
.
WARNING: Make sure the parking brake will
hold the unit stationary.
Move the 4.
throttle control (C)
to the SLOW position.
To stop the engine, turn the5.
ignition key (D)
to the
OFF position. Remove the key.
How To Transport The Unit
To transport the unit, follow the steps below.
(Figure 7) Move the 1.
blade rotation control (F
) to
the
DISENGAGE
position.
Raise the2.
lift lever (A)
to the highest position.
Move the 3.
throttle control (C)
to a position be tween
SLOW and FAST.
Slowly push the 4.
speed control pedal (G)
forward to
attain the desired speed.
Mowing
How To Operate With The Mower Housing
IMPORTANT: When you operate with the mower
housing, always operate with the throttle control
in the FAST position.
Start the engine.1.
Move the lift lever to a height of cut position. In high or 2. thick grass, cut the grass in the highest position first
and then lower the mower housing to a lower position.
Move the throttle control to the 3.
SLOW
posi tion.
Slowly move the blade rotation control to the 4.
ENGAGE
position.
Move the throttle control to the 5.
FAST
posi tion.
Slowly push the speed control pedal to the 6. desired speed.
NOTE:
When you mow in heavy grass or mow with a
bagger, use a slow forward speed.
Make sure the level of cut is still correct. After you mow 7. a short distance, look at the area that was cut. If the
mower housing does not cut level, see your dealer.
WARNING: For better control of the unit,
select a safe speed.
How To Operate On Hills
WARNING: Do not ride up or down slopes
that are too steep to back straight up. Never
ride the unit across a slope.
Control the speed only with the speed control pedal. Do 1. not use the brake pedal on a hill.
To help prevent an accident, slowly move the speed 2. control pedal. Avoid sudden turns or changes in speed.
To reduce forward speed when going down a hill, 3. slowly release the speed control pedal until the unit
slows to the desired speed.
How To Stop On A Hill
Avoid stopping on a hill. If you must quickly stop in 1. an emergency, remove your right foot from the speed
control pedal and quickly de press the left brake pedal.
Set the parking brake.2.
Before you dismount from the seat, move the throttle 3. control to the SLOW position, move the blade rotation
control attachment clutch to the DISENGAGED
position, turn off the en gine and set the parking brake.
How To Start Operation On A Hill
Start the engine.1.
Move the blade rotation control attachment clutch to the 2. ENGAGED position.
Move the throttle control to the FAST posi tion.3. Depress the brake pedal and release the parking brake. 4. As you release the parking brake, push the speed
control pedal to the desired speed.
Slowly push the speed control pedal as you
release the parking brake. The parking
brake must be disengaged before the speed
control pedal is able to engage
the transmission.
Before Starting The Engine
Check The Oil
NOTE
: The engine was shipped from the fac tory filled with
oil. Check the level of the oil. Add oil as needed. See the
engine manufac turer’s instructions for the type of petrol and
oil to use.
Make sure the unit is level.1.
NOTE:
Do not check the level of the oil while the
engine runs.
Check the oil. Follow the procedure in the engine 2. manufacturer’s instructions.
If necessary, add oil until the oil reaches the FULL mark 3. on the dipstick. The quantity of oil needed from ADD to
FULL is shown on the dipstick. Do not add too much oil.
Not for
Reproduction
13
Add Petrol
WARNING: Always use a safety petrol
container. Do not smoke when adding
petrol to the fuel tank. Do not add petrol
when you are inside an enclosure. Before
you add petrol, stop the engine and let the
engine cool for several minutes.
(Figure 8) Fill the
fuel tank (A)
to the
FULL (B
) position
with regular unleaded petrol. Do not use premium unleaded
petrol. Make sure the petrol is fresh and clean. Leaded petrol
will increase deposits and shorten the life of the valves.
How To Start The Engine
WARNING: The electrical system has an
operator presence system that includes a
sensor switch for the seat. These
components tell the electrical system if the
operator is sitting on the seat. This system
will stop the engine when the operator
leaves the seat. For your protection, always
make sure this system operates correctly.
NOTE: The engine will not start unless you fully depress
the brake pedal and move the blade rotation control to the
DISENGAGE
position.
Push the brake pedal fully forward. Keep your foot on 1. the pedal.
Make sure the blade rotation control is in the 2.
DISENGAGE
position.
Move the throttle control to the CHOKE or FAST 3. position. Some mo dels have a separate choke knob.
Pull the choke knob to the full CHOKE position. See the
engine manual.
Turn the ignition key to the START position.4.
NOTE:
If the engine does not start after four or five
tries, move the throttle control to the FAST position.
Again try to start the engine. If the engine will not start,
see the
Troubleshooting
section.
Slowly move the throttle control to the SLOW position.5.
To start a hot engine, move the throttle con trol to a 6. position between FAST and SLOW.
Mowing And Bagging Tips
For a lawn to look better, check the cutting level of the 1. mower housing. See authorized dealer.
For the mower housing to cut level, make sure the tires 2. have the correct amount of air pressure.
Every time you use the unit, check the blade. If the 3. blade is bent or damaged, immediately replace the
blade. Also, make sure the nut for the blade is tight.
Keep the blade(s) sharpened. Worn blades will cause 4. the ends of the grass to turn brown.
Do not cut or bag grass that is wet. Wet grass will not 5. discharge correctly. Let the grass dry before cutting.
Use the left side of the mower housing to trim near 6. an object.
Discharge the cut grass onto the mowed area. The 7. result is a more even discharge of cut grass.
When you mow large areas, start by turning to the right 8. so that the cut grass will dis charge away from shrubs,
fences, driveways, etc. After one or two rounds, mow in
the op posite direction making left turns until fin ished.
If the grass is very high, cut two times to de crease the 9. load on the engine. First cut with the mower housing in
the highest position and then lower the mower housing
for the second cut.
For better engine performance and an even discharge 10. of the cut grass, always operate the engine with the
throttle in FAST position.
When you use a bagger, operate the engine with the 11. throttle in FAST position and the speed control pedal
pushed 1/3 to 1/2 for ward.
After each use, clean the bottom and top of the mower 12. housing for better performance. Also, a clean mower
housing will help pre vent a fire.
Not for
Reproduction
14 murray.com
Maintenance
Maintenance Chart
TRACTOR AND MOWER
Every 8 Hours or Daily
Check safety interlock system
Clean debris off tractor and mower deck
Clean debris from engine compartment
Every 25 Hours or Annually *
Check tire pressure
Check mower blade stopping time
Check tractor and mower for loose hardware
Every 50 Hours or Annually *
Clean battery and cables
Check tractor brakes
See Dealer Annually to
Lubricate tractor and mower
Check mower blades **
ENGINE
First 5 Hours
Change engine oil
Every 8 Hours or Daily
Check engine oil level
Every 25 Hours or Annually *
Clean engine air filter and pre-cleaner **
Every 50 Hours or Annually *
Change engine oil
Replace oil filter
Annually
Replace air filter
Replace pre-cleaner
See Dealer Annually to
Inspect muffler and spark arrester
Replace spark plug
Replace fuel filter
Clean engine air cooling system
* Whichever comes first
** Check blades more often in regions with sandy soils or
high dust conditions.
* Whichever comes first
** Clean more often in dusty conditions or when airborne
debris is present.
Not for
Reproduction
15
Check Tire Pressure
Check the air pressure in the tires. Tires with too much air
pressure will cause the unit to ride rough. Also, the wrong air
pressure will keep the mower housing from cutting level. The
correct air pressure is: Front Tires 0,97 BAR (14 PSI), Rear
Tires 0,69 BAR (10 PSI).
Maintenance Free Battery
How To Remove The Battery
(Figure 6) To charge or clean the
battery (E)
, remove the
battery (E)
from the unit as follows.
WARNING: To prevent sparks, dis connect
the black battery cable from the negative (-)
terminal be fore you disconnect the red
cable (C).
WARNING: The battery contains sulphuric
acid which is harmful to the skin, eyes and
clothing. If the acid gets on the body or
clothing, wash with water.
Disconnect the black cable from the negative 1. (-) terminal.
Disconnect the 2.
red cable (C)
from the
posi tive (+)
terminal (B)
.
Lift the 3.
battery tray (F)
and the
battery (E)
out of
the unit.
How To Charge The Battery
WARNING: When you charge the battery, do
not smoke. Keep the battery away from any
sparks. The fumes from the battery acid can
cause an explosion.
(Figure 6) Before you charge the 1.
battery (E)
, remove
the
battery (E)
.
To charge the 2.
battery (E)
, use a 12 volt bat tery
charger. Charge at a rate of 6 amperes for 1 hour.
Install the 3.
battery (E)
.
WARNING: To prevent sparks, fasten the
red cable to the positive (+) terminal before
you connect the black cable.
Fasten the 4.
red cable (C)
to the
positive (+)
terminal (B)
with the fasteners as shown.
Fasten the black cable to the negative (-) terminal with 5. the fasteners as shown.
Storage
WARNING: Never store the unit (with fuel)
in an enclosed, ventilated structure. Fuel
vapors can travel to an ignition source
(such as a furnace, water heater, etc.) and
cause an explosion. Fuel vapor is also toxic
to humans and animals.
When Storing Fuel Or Equipment With Fuel In Tank
Store away from furnaces, stoves, water heaters or appliances that have pilot lights or other ignition
sources because they can ignite fuel vapors.
Equipment
Battery life will be increased if it is removed. Put in a cool, dry
place and fully charged about once a month. If the battery is
left in the unit, disconnect the negative cable.
Fuel System
Fuel can become stale when stored over 30 days. Stale fuel
causes acid and gum deposits to form in the fuel system or
on essential carburetor parts. To keep fuel fresh, use Briggs
& Stratton FUEL FIT® fuel stabilizer, available as a liquid
additive or a drip concentrate cartridge.
There is no need to drain gasoline from the engine if a
fuel stabilizer is added according to instructions. Run the
engine for 2 minutes to circulate the stabilizer throughout the
fuel system. The engine and fuel can then be stored up to
24 months.
If gasoline in the engine has not been treated with a fuel
stabilizer, it must be drained into an approved container.
Run the engine until it stops from lack of fuel. The use of a
fuel stabilizer in the storage container is recommended to
maintain freshness.
Engine Oil
While the engine is still warm, change the engine oil. See the
engine manual.
Before starting the unit after it has been stored:
Check all fluid levels. Check all maintenance items.
Perform all recommended checks and procedures found in this manual.
Allow the engine to warm up for several minutes before use.
Order Replacement Parts
Warranty service is available only through Autho rized Service
Dealers. Locate your nearest dealer in our locator map at
www.murray.com
.
Not for
Reproduction
16 murray.com
Troubleshooting
PROBLEM LOOK FOR REMEDY
Engine will not turnover
or start.
Brake pedal not depressed. Fully depress brake pedal.
PTO (electric clutch) switch
is in ON position.
Place in OFF position.
Cruise control engaged. Move knob to NEUTRAL/OFF position.
Out of fuel. If engine is hot, allow it to cool, then refill the fuel tank.
Engine flooded. Disengage the choke.
Fuse is blown. See authorized dealer.
Battery terminals require
cleaning.
See Maintenance Free Battery section.
Battery discharged or dead. Recharge or replace battery.
Wiring loose or broken. Visually check wiring. If wires are frayed or broken, see
authorized dealer.
Solenoid or starter motor
faulty.
See authorized dealer.
Safety interlock switch faulty. See authorized dealer.
Water in fuel. See authorized dealer.
Gas is old or stale. See authorized dealer.
Engine starts hard or runs
poorly.
Fuel mixture too rich. Clean air filter.
Engine has other problem. See authorized dealer.
Engine knocks. Low oil level. Check/add oil as required.
Using wrong grade oil. See engine manual.
Excessive oil
consumption.
Engine running too hot. See authorized dealer.
Using wrong grade oil. See engine manual.
Too much oil in crankcase. Drain excess oil.
Engine exhaust is black. Dirty air filter. See engine manual.
Choke closed. Open choke.
Engine runs, but tractor
will not drive.
Ground speed control
pedals not depressed.
Depress pedals.
Transmission release lever in
PUSH position.
Move into DRIVE position.
Mower drive belt is broken. See authorized dealer.
Parking brake is engaged. Disengage parking brake.
Traction drive belt is broken
or slipping.
See authorized dealer.
Troubleshooting the Tractor
Not for
Reproduction
17
PROBLEM LOOK FOR REMEDY
Mower will not raise. Lift linkage not properly
attached or damaged.
See authorized dealer.
Mower cut is uneven.
Mower not leveled properly. See authorized dealer.
Tractor tires not properly
inflated.
See Check Tire Pressure section.
Mower cut is rough
looking.
Engine speed too slow. Set to full throttle.
Ground speed too fast. Slow down.
Mower has other problem. See authorized dealer.
Engine stalls easily with
mower engaged.
Engine speed too slow. Set to full throttle.
Ground speed to fast. Slow down.
Dirty or clogged air filter. See engine manual.
Cutting height set too low. Cut tall grass at maximum cutting height during first pass.
Discharge chute jamming. Cut grass with discharge pointing toward previously cut area.
Engine not up to operating
temperature.
Run engine for several minutes to warm-up.
Starting mower in tall grass. Start the mower in a cleared area.
Excessive mower
vibration.
Mower has other problem. See authorized dealer.
Engine runs and tractor
drives, but mower will not
drive.
Blade rotation control not
engaged.
Engage blade rotation control.
Mower has other problem. See authorized dealer.
Troubleshooting the Mower
PROBLEM LOOK FOR REMEDY
Brake will not hold. Internal brake worn. See authorized dealer.
Tractor steers hard or
handles poorly.
Steering linkage is loose. See authorized dealer.
Improper tire inflation. See Check Tire Pressure section.
Front wheel spindle bearings
dry.
See authorized dealer.
Troubleshooting the Tractor (Continued)
Not for
Reproduction
18 murray.com
1737660 Rev B
BRIGGS & STRATTON POWER PRODUCTS GROUP, L.L.C. OWNER WARRANTY POLICY
LIMITED WARRANTY
Briggs & Stratton Power Products Group, LLC will repair and/or replace, free of charge, any part(s) of the equipment that is
defective in material or workmanship or both. Briggs & Stratton Corporation will repair and/or replace, free of charge, any
part(s) of the Briggs and Stratton engine* (if equipped) that is defective in material or workmanship or both. Transportation
charges on product submitted for repair or replacement under this warranty must be borne by purchaser. This warranty is
effective for the time periods and subject to the conditions stated below. For warranty service, find the nearest Authorized
Service Dealer using our dealer locator at www.murray.com.
There is no other express warranty. Implied warranties, including those of merchantability and fitness for a particular
purpose, are limited to one year from purchase or to the extent permitted by law. Liability for incidental or consequential
damages are excluded to the extent exclusion is permitted by law.
Some states or countries do not allow limitations on how long an implied warranty lasts, and some states or countries do
not allow the exclusion or limitation of incidental or consequential damages, so the above limitation and exclusion may not
apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state
or country to country.
WARRANTY PERIOD
The warranty period begins on the date of purchase by the first retail consumer or commercial end user, and continues for the
period of time stated above. “Consumer use” means personal residential household use by a retail consumer. “Commercial
use” means all other uses, including use for commercial, income producing or rental purposes. Once product has experienced
commercial use, it shall thereafter be considered as commercial use for purposes of this warranty.
No warranty registration is necessary to obtain warranty on Briggs & Stratton products. Save your proof of purchase receipt. If you
do not provide proof of the initial purchase date at the time warranty service is requested, the manufacturing date of the product will
be used to determine warranty eligibility.
ABOUT YOUR WARRANTY
We welcome warranty repair and apologize to you for being inconvenienced. Warranty service is available only through servicing
dealers authorized by Briggs & Stratton or BSPPG, LLC.
Most warranty repairs are handled routinely, but sometimes requests for warranty service may not be appropriate. This warranty
only covers defects in materials or workmanship. It does not cover damage caused by improper use or abuse, improper
maintenance or repair, normal wear and tear, or stale or unapproved fuel.
Improper Use and Abuse - The proper, intended use of this product is described in the Operator’s Manual. Using the product in
a way not described in the Operator’s Manual or using the product after it has been damaged will void your warranty. Warranty is
not allowed if the serial number on the product has been removed or the product has been altered or modified in any way, or if the
product has evidence of abuse such as impact damage, or water/chemical corrosion damage.
Improper Maintenance or Repair - This product must be maintained according to the procedures and schedules provided in the
Operator’s Manual, and serviced or repaired using genuine Briggs & Stratton parts. Damage caused by lack of maintenance or use
of non-original parts is not covered by warranty.
Normal Wear - Like all mechanical devices, your unit is subject to wear even when properly maintained. This warranty does not
cover repairs when normal use has exhausted the life of a part or the equipment. Maintenance and wear items such as filters,
belts, cutting blades, and brake pads (engine brake pads are covered) are not covered by warranty due to wear characteristics
alone, unless the cause is due to defects in material or workmanship.
Stale Fuel - In order to function correctly, this product requires fresh fuel that conforms to the criteria specified in the Operator’s
Manual. Damage caused by stale fuel (carburetor leaks, clogged fuel tubes, sticking valves, etc) is not covered by warranty.
* Applies to Briggs and Stratton engines only. Warranty coverage of non-Briggs and Stratton engines is provided by the engine manufacturer.
Item Consumer Use Commercial Use:
Equipment 2 Years 90 Days
Engine* 2 Years 90 Days
Battery 1 Year 1 Year
EN
Not for
Reproduction
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208
  • Page 209 209
  • Page 210 210
  • Page 211 211
  • Page 212 212
  • Page 213 213
  • Page 214 214
  • Page 215 215
  • Page 216 216
  • Page 217 217
  • Page 218 218
  • Page 219 219
  • Page 220 220
  • Page 221 221
  • Page 222 222
  • Page 223 223
  • Page 224 224
  • Page 225 225
  • Page 226 226
  • Page 227 227
  • Page 228 228
  • Page 229 229
  • Page 230 230
  • Page 231 231
  • Page 232 232
  • Page 233 233
  • Page 234 234
  • Page 235 235
  • Page 236 236
  • Page 237 237
  • Page 238 238
  • Page 239 239
  • Page 240 240
  • Page 241 241
  • Page 242 242
  • Page 243 243
  • Page 244 244
  • Page 245 245
  • Page 246 246
  • Page 247 247
  • Page 248 248
  • Page 249 249
  • Page 250 250
  • Page 251 251
  • Page 252 252
  • Page 253 253
  • Page 254 254
  • Page 255 255
  • Page 256 256
  • Page 257 257
  • Page 258 258
  • Page 259 259
  • Page 260 260
  • Page 261 261
  • Page 262 262
  • Page 263 263
  • Page 264 264
  • Page 265 265
  • Page 266 266
  • Page 267 267
  • Page 268 268
  • Page 269 269
  • Page 270 270
  • Page 271 271
  • Page 272 272
  • Page 273 273
  • Page 274 274
  • Page 275 275
  • Page 276 276

Simplicity MULTI-LANGUAGE OPERATOR'S MANUAL, YARD KING RIDING MOWER 17.5/22HP 46" Benutzerhandbuch

Kategorie
Rasenmäher
Typ
Benutzerhandbuch