SPYPOINT S-WiFi model Benutzerhandbuch

Marke: SPYPOINT

Modell: S-WiFi model

Kategorie: Action-Sportkameras

Typ: Benutzerhandbuch

Wifi Camera

Caméra Wifi

WiFi-Kamera

User manual / Manuel d'utilisation/

Bedienungsanleitung

www.spypoint.com

WiFi model

Modèle WiFi

WiFi modell

S-WiFi model

Modèle S-WiFi

S-WiFi modell

RC-1 Remote control (included)

Télécommande RC-1(incluse)

Fernbedienung RC-1 (mitgelieferten)

2 3

English

v.1.2

English

Thank you for choosing the SPYPOINT WiFi

monitoring system. This manual will help you get the most out of

your new device. For the latest version of the user manual or for

additional information, visit our website at www.spypoint.com.

If you need information or to subscribe to mySPYPOINT service,

go to www.myspypoint.com.

4 5

English

SPECIFICATIONS

Photo recording:

Photo resolution 8 MP

File format JPG

Multi-shot Up to 6 pictures per detection

Time Lapse Predefined intervals from 10 min

to 2h

Stamp Date, time, temperature and moon

phase printed on photo

Capture mode Color by day,

black and white by night

Video recording:

Video resolution 640 x 480

File format MP4

Sequence length Adjustable from 10 to 90 secs

Capture mode Color by day,

black and white by night

Sound recording: Automatically recorded

in video mode

Memory storage: SD/SDHC card up to 32 GB

(No internal memory)

Viewing:

Built-in screen 3.5" TFT-LCD

TV output Composite video (PAL/NTSC)

Computer output USB 2.0

Power supply: (accessories sold separately, see «Options»)

Alkaline or lithium

batteries

8x AA

Lithium battery pack Rechargeable battery pack

(LIT-09/LIT-C-8)

External (12V jack) 12-volt battery

(BATT-12, KIT-12V) /

12-volt adapter (AD-12V)

Solar panel (12V jack) Solar panel (SP-12V) combined

with rechargeable battery pack

(LIT-09/LIT-C-8)

Detection system:

Motion sensor PIR

Detection angle 30°

Detection range Adjustable from 5 to 50ft

Delay between each

detection

Adjustable from 1 to 30mins

*Additional 10 sec. setting

(see «DELAY»)

Electricity option

(Connected to a 12V DC

Main source only)

Instant trigger time

Night time illumination system:

LED 48 LEDs

Type Infrared LEDs

Exposure Automatic infrared level adjustment

Optical field of view: 50°

Wi-Fi transmission

system: • For «Hunting» mode, Wi-Fi

network is activated by the remote

control.

• For «Home Security» mode, an

existing Wi-Fi network is required.

• For «mySPYPOINT» mode,

an existing Wi-Fi network and

mySPYPOINT subscriptions are

required. For more information,

visit www.myspypoint.com

6 7

English

Configuration of the

camera: • For «Hunting» mode, the camera

can be configured remotely on the

website www.nameofthecamera.com

via the activation of Wifi camera

network with the remote control.

• For «Home Security» mode, can

only be configured from the camera.

• For «mySPYPOINT» mode,

the camera can be configured

from mySPYPOINT website

(subscription required).

Softwares: • The software « SPYPOINT Security

manager» and «SPYPOINT Hunting

photos downloader» are available on

www.spypoint.com

• These softwares are compatible with

Windows only.

Technology Remos:This camera is compatible with

Spypoint Remos Technology (see

«Remos Technology» section).

Recommendations:

Operating temperature (-20 °C to + 50 °C)

(-4 °F to +122 °F)

Storage temperature (-30 °C to + 75 °C)

(-22 °F to +167 °F)

CONTENTS

• SPYPOINT WiFi camera

• RC-1 Remote control

• Wi-Fi antenna 2.4 GHz

• Installation strap

• USB and audio-video cables

• User Manual

POWER SUPPLY

The battery level is shown in the upper left corner of the screen

when the camera is in « Test » mode. When a single line remains, the

camera will continue to take pictures but we strongly recommend

changing the batteries before they are empty (see figure below).

AA BATTERIES

This camera requires the use of 8 AA batteries (1.5V). The use of

alkaline or lithium batteries is strongly recommended. Also note

that the voltage of rechargeable AA batteries (1.2V) is insufficient

to power this camera. During the installation of AA batteries, place

the switch inside the battery case to «ALK» (i.e. alkaline). Insert

the batteries in the camera as indicated. Exact polarity must be

followed. We also recommend the use of new batteries to ensure

maximum performance of your camera.

LITHIUM BATTERY PACK

The camera can be powered by a rechargeable lithium battery pack

LIT-09/LIT-C-8 (sold separately, see «Options»). This type of

battery is less affected by cold temperatures and lasts up to 3 times

longer than alkaline batteries. During the installation of lithium

batteries, place the switch inside the battery case to «LIT-09». Insert

the batteries in the camera as indicated (see figure below).

RESET

ALK

LIT-09

8 9

English

EXTERNAL

The camera can be powered from an external 12-volt DC input

such as a 12-volt battery (BATT-12/KIT-12V, sold separately) or a

12-volt adapter (AD-12V, sold separately). When using a 12-volt

connection, we recommend removing the AA batteries to prevent

surcharges. During the installation of a 12-volt connection, place the

switch inside the battery case to «ALK» (i.e. alkaline). If combined

with a lithium battery pack, slide the switch to «LIT-09». To find the

accessories available for the 12-volt power supply, see «Options».

SOLAR PANEL

This model offers the possibility of a connection to a solar panel

SP-12V (sold separately, see «Options») to maintain the charge

of the lithium battery pack LIT-09/LIT-C-8 (sold separately, see

«Options»). During the installation of the rechargeable lithium

battery pack, slide the switch inside the wbattery case to «LIT-09»

to activate the charging system of the solar panel.

MEMORY STORAGE

Using a memory card (sold separately, see «Options») is required

to operate the camera. When the «Photo» or «Video» mode is

selected, the screen displays «No memory card» if no memory card

is present. The camera is compatible with SD/SDHC memory card,

up to 32 GB capacity. Before inserting or removing a memory card,

the camera must be turned off. Failing to do so may cause loss of

pictures or damage the pictures already recorded on the memory

card. When the SD card is full, the viewing screen indicates

«Memory card full» when the «Photo» or «Video» mode is selected.

The used space on the memory card is displayed as percentage in

the upper right corner of the screen when the camera is in «Test»

mode. The following data shows the approximate quantity of photos

or video length that can be taken by the camera depending on the

memory card capacity.

2.0 GB 4.0 GB 8.0 GB 32 GB

Photo

8 MP 1190 2380 4760 19040

Video

640 x 480 65 min 2h10 4h10 16h40

«BUSY» LED

The «BUSY» light, located next to the screen, lights up when

the camera is recording and flashes during the activation of a Wi-Fi

network.

MAIN MENU

Use the « ▲ » and « ▼ » button to navigate the interface or to

modify a selection, the « OK » button to select and the « BACK »

button to return to the previous menu.

The following information appears on the main menu screen:

1.Serial number

2.Software version

1. 2.

10 11

English

PHOTO

To take pictures. The «Photo» mode must be selected by

pressing «OK»; the test light in the front of the camera (see

below) will ﬂ ash for 60 seconds to allow the user to leave the area

without being photographed. A countdown is also displayed on the

screen during boot time.

VIDEO

To take videos. The «Video» mode must be selected by

pressing «OK»; the test light in the front of the camera (see

above) will ﬂ ash for 60 seconds to allow the operator to leave the

area without being videoed. A countdown is also displayed on the

screen during boot time.

SETTINGS

Sets the advanced options of the camera

(see «Settings Menu» for details).

TEST

Allows the user to test the detection system of the camera.

When the «Test» mode is selected, no photo or video

is recorded. Pass in front of the camera from left to right. When

the camera detects motion, the test light blinks to indicate that the

camera would normally have saved a photo or video. If the system

does not detect movement, increase the detection range using the

option «Sensitivity» in the Settings menu ( «Low», «Medium» or

«High»). Realign the system if necessary. Once you understand

how the device responds to detections, you can better adjust the

direction or the height of the camera.

Test light

How to properly install your camera

using the supplied installation strap:

(Recommended installation height: about 3 feet)

In «Test» mode, it is possible to take a picture by pressing the

«OK» button. The photo is saved and appears in «View» mode.

The «Test» mode also provides information on:

1. The battery level

2. The used space on the memory card (as a percentage)

1. 2.

12 13

English

VIEW

Allows the user to view photos or videos on the built-in

3.5" screen of the camera or on a TV set.

With 3.5" built-in screen:

When «View» mode is selected, the last recorded image or video

automatically appears on the screen. Press the « ◄ » or « ► »

button to view the previous or next file. Press «OK» to see the

different options available. Press «BACK» to return to the photo or

video. See different options available:

Play: Plays or pauses the video on the screen.

(This option is available only for videos)

Delete: Deletes the photo or video displayed on the screen.

Delete all: Deletes all photos and videos that were not

protected.

Format: Deletes the entire contents of the memory card,

including protected files.

Note: Press the « ▲ » to enlarge the image on the

screen or « ▼ » to return to the original size. When

the image is enlarged, use the navigation buttons to

video the part of the image wanted. Press «BACK»

to return to original size.

With a TV set:

Allows the user to view photos and videos directly on a TV set. Turn

the camera on and plug the yellow end of the composite audio-video

cable supplied with the camera to «VIDEO IN» input of the TV set

and the other end into the «TV OUT» output of the camera. The

camera screen turns black and the last recorded picture or video will

appear on the TV screen. To change the photos or videos, use the

« ◄ » and « ► » button. The options are the same as when viewing

on the built-in screen of the camera (see above).

SETTINGS MENU

Allows the user to set the advanced settings of the camera.

To configure the system in another language, press the « ▼ »

button until the option «Language» is highlighted. Press «OK»

and modify the selection with « ▲ » or « ▼ » button. Confirm the

choice by pressing «OK». The system will change all the menus in

the selected language.

Navigating the menu:

• «

▲ » and « ▼ » button to change settings

• « ◄ » and « ► » button to change pages

When selected, some options affect the behaviour of other

options from the list of the settings menu. In this case, the

selected option is displayed in yellow and options affected are

shown in gray.

WiFi conf.:

(Hunting/

Home Security/

mySPYPOINT)

Allows to choose the configuration mode.

Note: When «Hunting» mode is selected, the

options «Synchronize» and «Synchronize

at» are disabled. The option «Remote » displays

«N/A», but will always be activated.

(See «Configuration modes» section for more

details on the different modes.)

Test WiFi: Allows to test the current configuration.

Date: Set the date as Year/Month/Day

Time: Set the time as Hour/Minute/Second

Note: The seconds are not printed on the pictures

when «Stamp» option is activated.

Time format:

(12h/24h)

Allows the user to choose between a 12 or

24 hour time period display on the photos.

(eg. 6:00 pm or 18:00)

14 15

English

Delay:

(10s/1min/3min/

5min/10min/

15min/30min)

Sets the time interval to wait between each

detection before the camera records the next

photo or video.

Additional setting: It is possible to decrease the

delay between detections to 10 seconds (instead

of 1 minute) by using the following procedure.

Note that the battery life will be affected.

Turn OFF the camera. Press and hold the

« ▲ » button and turn the camera ON . «10sec

enabled» appears on the screen meaning the

minimum delay is now 10 seconds. To reset

the camera to 1 minute delay, follow the same

procedure. «10sec disabled» appears on the

screen (see figure below)

Video length:

(10s/30s/60s/90s)

Sets the recording time of video in «VIDEO»

mode.

Multi-shot:

(1/2/3/4/5/6

consecutive shots)

Allows the camera to take several consecutive

shots at each detection with a 10 second delay

between each photo.

10s enabled 10s disabled

Délai de 1 min.Délai de 10 sec.

Time Lapse:

(Off/10min/

30min/1h/2h)

Allows the camera to take pictures at regular

preset intervals. This option may be useful to get

pictures of animals outside the detection range

of the camera.

When the option «Time Lapse» is enabled:

• The «Delay» option is disabled.

• The «Multi-shot» option is disabled.

• The picture size is reduced to 800x600 in local

recording on the memory card.

Note: The «Time Lapse» recording option only

applies in «PHOTO» mode, not in «VIDEO»

mode.

Work: Allows the user to set the period of operation of

the camera for each day of the week. The start

and stop time are the hours during which the

camera is in action and can record pictures or

videos.

Example: If the user selects a start time « 15h »

and a stop time « 19h», the camera will only

detect for that period of time and will stay

inactive for the remaining hours. Press «OK»

and use « ▲ » or « ▼ » to adjust the start time.

Press «OK» again to set the stop time. When the

time is properly set, press «OK» again to go back

to other settings. For an activation of 24 hours,

the same start and stop time must be entered

(example: 00h as start time and 00h as stop time.

These hours are the default configuration of

your camera).

To turn off the camera, enter « --h » as start time

or end time. The camera is inactive for that day.

Note: The hours can be recorded over a 12 or 24

hours period. Refer to the «Time format» option

(00h means midnight)

16 17

English

Stamp:

(Yes/No)

Select or cancel imprinting date, time,

temperature and moon phases on photos.

New moon:

Waxing Crescent:

First Quarter:

Waxing Gibbous:

Full moon:

Waning Gibbous:

Last Quarter:

Waning crescent:

Temp.

format:

(°F/°C)

Changes the temperature display.

Language:

(English/Français/

Deutsch)

Sets the display language of the camera’s menus.

Synchronize:

(Permanent/1/2/6/

12 times a day)

Sets the daily number of synchronizations

For «Home Security» mode, this option

changes the frequency at which the camera

communicates with the existing Wi-Fi network

to send photos in the folder selected during the

configuration of the system (with «SPYPOINT

Security manager» software).

For «mySPYPOINT» mode, this option

changes the frequency at which the camera

communicates with the mySPYPOINT server

in order to update its status or to send photos on

the user’s account.

Note: When this option is set to «Permanent», it

requires more energy.

Synchronize

at: For «Home Security» mode, defines at what

time of day the camera communicates with the

existing Wi-Fi network to send photos in the

folder selected during the configuration of the

system (with «SPYPOINT Security manager»

software).

Note: The computer must be running and the

software enabled for synchronization work.

For «mySPYPOINT» mode, defines at what

time of day the camera communicates with the

mySPYPOINT server in order to update its

status or to send photos on the user’s account.

(Over a period of 24 hours)

e.g.1: The option «Synchronize at» is set to 8:00

and the option «Synchronize» is set to 6/day.

The camera performs 6 synchronizations per day

and begins its first transfer at 4h, then at 8h, 12h,

16h, 20h and 24h.

e.g.2: The option «Synchronize at» is set to

13:00 and the option «Synchronize» is set to 2/

day.

The camera performs 2 synchronizations per day

and begins its first transfer at 1h, then at 13h.

Sensitivity:

(Low/Medium/

High)

Sets the detection sensitivity of the camera.

Note: The system detects only heat sources in

motion. So it is important during installation to

avoid as much as possible, objects obstructing

the camera . This prevents the camera from

being triggered because of the sun reflecting on

these objects. (e.g. a tree branch)

18 19

English

Power:

(Batteries/

Electricity)

Allows the user to select the type of power

supply.

Choose «Electricity» if the camera is powered

of a main electric supply. (using a 12-volt DC

adapter AD-12V, sold separately). Main electric

supply is recommended for security purposes.

It provides an instant trigger time when a

movement is detected. The lithium battery pack

and the AA batteries can remain safely inside the

camera and it is ideal in case of a blackout. A

12-volt DC adapter that can provide a minimum

of 800 mA is required

(See «Options» for accessories).

When the option «Electricity» is enabled:

• The option «Delay» is reduced and locked to 2

seconds to speed up the photo shooting.

• The «Multi-shot» speed is improved with a 2

second delay between each take.

• The option «Time Lapse» is disabled.

• The option «Synchronize» is locked on

«Permanent» (for «Home Security» and

«mySPYPOINT» mode) to allow transmission

of pictures after each set of pictures recorded.

• The option «Synchronize at» is ignored.

• If the option «Multi-shot» is enabled, the

Wi-Fi transmission is performed once the

series of photos is recorded.

• The camera is synchronized with the server

every 10 mins. and uses an average of 1.4Mb

of data per day excluding the weight of

pictures transmitted during this period.

Continuous:

(Yes/No)

Allows the camera to operate in continuous

mode. When there is no more space available on

the memory card to save photos or videos, the

camera continues to save by erasing the oldest

files and by replacing them with newest ones.

Infrared:

(On/One LED/

Off)

Selects the desired infrared illumination mode.

ON: All LEDs illuminate when taking photos or

videos at night.

One LED: Only a single LED illuminates (see

figure). This option can be useful when using an

IR-Booster.

OFF: LEDs are deactivated so your night

photos or videos are pitch black.

Remote :

(REMOS)

(On/Off)

Allows use of the remote control. (see «Remote

control» section for details)

IR-Booster

(Remos)

(On/Off)

Allows the camera to trigger, up to a distance

of 50 ft, one or more remote IR-BOOSTER

infrared lighting devices without the use of an

additional transmitter.

MS-1:

(Remos)

(On/Off)

Allows the camera to be triggered wirelessly by

one or more MS-1 devices. (see «Options» for

details)

Info: Displays system information:

• Model name

• Serial number

• Software version

• MAC address

One LED

20 21

English

CONFIGURATION MODES

The SPYPOINT WiFi camera offers the possibility to choose

between 3 configuration modes: «Hunting», «Home Security» or

«mySPYPOINT».

«HUNTING» MODE

Features: The network of the WiFi camera can be enabled

or disabled using the remote control RC-1

and allows the hunter to access his camera

while staying away from his hunting spot.

Connection to the WiFi camera is possible

with a Smartphone, laptop or a tablet to view

pictures or to change settings.

When configuring:

(Follow the steps on the camera screen)

Name of the

camera

When entering the name of the camera, it is

possible to select up to 20 characters. Use but-

tons « ▲ » and « ▼ » to change letters or num-

bers and use buttons « ◄ » and « ► » to move

from right to left in the name. Press «OK» only

when the name is completed.

Test the

connection

• Select the existing Wi-Fi network with the

camera name on a Smartphone, laptop or a

tablet.

• Open a browser and type «www.cameraname.

com» and you should see the status page

• The connection test is completed, press

«OK» on the camera.

Note: After 2 minutes of inactivity on the Wi-Fi

network, the camera automatically returns to its

previous mode («PHOTO» or «VIDEO») and

the Wi-Fi network is disabled.

Camera setup/

Viewing photos: It is possible to view photos, see the status of

the camera and change its configuration via the

Wi-Fi network (The camera must be in

«PHOTO» or «VIDEO» mode ).

• Activate the camera Wi-Fi network with the

remote control. (see «Remote control» section)

• Select the existing Wi-Fi network with the

camera name on a Smartphone, laptop or a

tablet.

• Open a browser and type «www.cameraname.

com».

Note: After 2 minutes of inactivity on the Wi-Fi

network, the camera automatically returns to its

previous mode («PHOTO» or «VIDEO») and

the Wi-Fi network is disabled.

SPYPOINT

Hunting photos

downloader

software:

(Available on www.

spypoint.com)

Allows to transfer the new photos to a folder in

a single download from a Smartphone, laptop

or a tablet. (The camera must be in «PHOTO»

or «VIDEO» mode)

• Activate the camera Wi-Fi network with the

remote control. (see «Remote control» section)

• Select the existing Wi-Fi network with the

camera name on a Smartphone, laptop or a

tablet.

• Open the software and select the folder

where you want to save the images and they

will be automatically transferred.

Note: The names of the images downloaded by

the software starts by SPLG.

Note: After 2 minutes of inactivity on the Wi-Fi

network, the camera automatically returns to its

previous mode («PHOTO» or «VIDEO») and

the Wi-Fi network is disabled.

22 23

English

«HOME SECURITY» MODE

Features: The Wi-Fi camera can be connected to an

existing Wifi network. This mode enables

monitoring when using a computer connected

to this same network.

When configuring:

(Follow the steps on the camera screen)

Name of the

camera

When entering the name of the camera, it is

possible to select up to 20 characters. Use but-

tons « ▲ » and « ▼ » to change letters or num-

bers and use buttons « ◄ » and « ► » to move

from right to left in the name. Press «OK» only

when the name is completed.

Test the

connection

For testing the connection, it is important

that the SD card from the camera has been

configured with «SPYPOINT Security

manager» software and this software must be

active. (See «SPYPOINT Security manager

software» section)

• Select an existing Wi-Fi network in the

screen of the camera.

• Enter the password of the network; it is

possible to select up to 20 characters. Use

buttons « ▲ » and « ▼ » to change letters or

numbers and use buttons « ◄ » and « ► »

to move from right to left in the name. Press

«OK» only when the name is completed.

• Verify that all configuration settings are

correct.

• Confirm the configuration and test the

connection. When the connection test is

completed, press «OK» on the camera.

Viewing photos: It is possible to view pictures from a computer.

Open the folder where you chose to save your

photos during the system configuration (with the

«SPYPOINT Security manager» software)

(See next section)

SPYPOINT

Security

manager

software:

(Available on www.

spypoint.com)

Allows to view photos from a computer.

Using the software:

Follow the steps on the camera screen.

-The «Start new configuration» option is

selected when the software must be used for

the first time on a computer or during the

configuration of the system before the use a

new SD card or a new camera.

-The «Use actual configuration» option is

selected to reactivate the software following

the shut down of the computer.

To view on your computer the new photos

taken by the camera, open the software and start

a synchronization with the remote control (See

«Remote control» section) or just wait the next

synchronization of the camera. (The camera

must be in «PHOTO» or «VIDEO» mode ).

The new photos will be transferred to the folder

where you chose to save your photos during the

system configuration.

Note: The name of the images downloaded by

the software starts by SPLG.

24 25

English

«MY

PYP

T» M

es:

hen the

iFi camera is connected to an

existing network, it can use mySPYPOINT

ervice to host picture

Therefore you can

quickly and easily access your photos from

anywhere using a Smartphone, a computer o

a tablet. Online configuration of the camera

s also possible via mySPYPOINT website

(subscription required)

hen configuring

(Follow the steps on the camera screen)

f th

hen entering the name of the camera, it is

possible to select up to 20 characters. Use but-

▲

» an

▼

» to change letters or num-

use

◄

» an

►

» t

ove

from right to left in the name. Press «OK» only

when the name is completed

t th

•

Select an existing Wi-Fi network in the

f th

•

Enter the password of the network

;

it is

possible to select up to 20 characters. Use

▲

» an

▼

» to change letters o

use

◄

» an

►

o move from right to left in the name. Press

«OK» only when the name is completed

•

erify that all configuration settings are

•

onfirm the configuration and test the

hen

n t

t i

ompleted, press «

n th

amera setup/

iewing photo

It is possible to view photos, see the status of

he camera and change its configuration via the

website www.m

PYP

com

(

subscription

equired)

REMOS TECHNOLOGY

This Remos compatible camera benefits from wireless capabilities

and can be combined with:

• RC-1 ― Remote control (control of the camera remotely)

• MS-1 ― Motion sensor (trigger of the camera remotely)

• IRB-W ― Infrared Booster (increases the lighting power)

Refer to the section «Settings» for details

Note: The optional steel security box (SB-92) affects wireless

functionalities of products compatible with Remos technology.

REMOTE CONTROL

Synchronize

Remote control:

Turn on the camera and leave the screen open

to the main menu. To synchronize the remote

control to the camera, press simultaneously

the «ON» and «FN» buttons. The red and

green lights will flash a few moments before

turning on and after, turning off. If the lights

are flashing constantly, it means that the

synchronization did not work. Try again.

Note: It is important that the «Remote» option

in the «Settings menu» is enabled.

Using the remote control:

Light features The red light flashes when the remote control

sends a signal. When the camera has received

this signal, the green light.

26 27

English

«ON»/«OFF»

buttons

Allows to enable or disable remotely the

detection of the camera.

«CAMERA»

button

Allows to take photos or videos (up to 500ft)

«FN» button Allows to enable or disable the Wi-Fi

network («Hunting» mode only) or to start

a synchronization («Home Security» and

«mySPYPOINT» modes).

Note: To start a synchronization, the camera

must be in «PHOTO» or «VIDEO» mode.

Note: When the Wi-Fi network is enabled, the

detection of the camera is disabled.

SOUND RECORDING

The SPYPOINT WiFi offers the possibility of recording the sound

in «VIDEO» mode. When the «VIDEO» mode is selected, the

camera automatically records the sound. The microphone is located

under the camera. (See figure below).

DOWNLOADING TO A COMPUTER

To transfer or view pictures and videos using a computer, the camera

must be powered and set to the main menu before connecting the

USB cable (supplied) to the computer. Once the cable is plugged,

the computer recognizes the camera and installs the driver

automatically. Click on «My Computer» and select «Removable

Disk». Then click «DCIM» and «100SPYPT» to find the photos

and videos stored on the memory card.

The folder named «TRANSMIT» is a systems folder used by the

cellular transmission protocol, ignore this folder.

Note: Videos in .MP4 format require the use of a compatible

video player software such as VLC or QuickTime.

Taking the memory card out of the camera and inserting it into the

computer port will achieve the same results. If no SD card slot is

built into the computer, use a multi-card reader RD25-1

(sold separately, see « Options »).

TROUBLESHOOTING

No person or no animal on photos:

1. Rising sun or sunset can trigger the motion sensor. Camera must

be reoriented.

2. At night, motion sensor may detect beyond range of the IR

illumination. Reduce the detection range of the camera («Settings

menu» / «Sensitivity»).

3. Small animals may cause unwanted detections. Reduce the

detection range and/or raise the camera.

4. Motion sensor may detect animals through foliage.

5. If a person/animal moves quickly, it may move out of the

camera’s field of view before the photo is taken. Move camera

further back or redirect camera.

6. Camera must be set on a stable and immovable object. e.g. large

tree.

28 29

English

SD Memory card, SD-8GB

Allows the user to record photos and videos.

Multi-card reader RD25-1

Allows the user to download photos and

videos directly into a personal computer,

without using the SPYPOINT camera. This

reader works with 25 different types of

memory cards and is compatible with SD/

SDHC cards.

Rechargeable lithium battery pack

including charger, LIT-C-8

Rechargeable lithium battery pack for

camera, to replace alkaline batteries. This

type of battery is less affected by cold

temperatures and lasts up to 3 times longer

than alkaline batteries.

Additional lithium battery pack, LIT-09

An additional lithium battery pack is a handy

spare.

Blinking red light in front of the camera:

Camera is set in «Photo» or «Video» mode. The red light on the

front of the camera flashes for 60 seconds to allow the user to leave

without being photographed or filmed. The camera can also be set

in «Test» mode.

The camera screen turns off:

The camera is set to «PHOTO» or «VIDEO» mode and the

screen turns off after a period of 2 minutes in order to preserve

battery life.

OPTIONS

See your local dealer or visit www.spypoint.com to find out

available products. The following products are popular options that

can be added to the SPYPOINT WiFi camera.

Water-Resistant battery box, KIT-12V

Water-resistant battery box. Includes a 12-

volt rechargeable battery, charger, 12 feet

power cable and carrying strap.

12ft power cable, PW-12FT

Spare 12 ft power cable, fits with KIT-12V.

12-volt rechargeable battery and charger,

BATT-12V

External 12-volt rechargeable battery to

power the camera.

12-volt power cable, CB-12FT

A 12 ft. cable allowing the user to connect the

camera into an external 12-volt DC power.

Water resistant battery box,

KIT6V-12V

Universal kit with two 6V rechargeable

batteries (2.8Ah), with 6V (5.6Ah) and 12V

(2.8Ah) output configuration, AC charger

with water resistant ABS plastic case. 12ft

power cable and strap included. Camo

pattern.

12-volt adapter, AD-12V

12-volt adapter for wall outlets, fits all

SPYPOINT cameras.

Solar Panel, SP-12V

Solar panel with adjustable steel mounting

kit. Can be used to maintain recharged

lithium battery directly into compatible

devices. Can also be combined with any

12-volt battery.

IR-Booster, IRB-W

100 LED wireless infrared module that

allows the user to amplify their infrared

lights at night for clearer shots.

30 31

English

Black LEDs IR-Booster, IRB-W-B

100 invisible LED (completely invisible to

the naked eye) wireless infrared module that

allows the user to amplify their infrared lights

at night for clearer shots.

Motion sensor, MS-1

Wireless motion sensor that allows to trigger

the camera remotely, up to 500ft away. Works

with all cameras compatible with Remos

technology. Requires 1 alkaline 9V battery or

a 12V power supply (not included).

Remote control, RC-1

Four button wireless remote control. Works

with all cameras compatible with Remos

technology (up to 500ft).

Security Metal Box, SB-92

Metal Box to secure the camera against theft.

It also protects it from damages that can be

caused by bears or other animals.

Cable lock, CL-6ft

6 feet long locking cable with key for

maximum theft protection.

Aluminum Tripod, TP-CAM

Lightweight tripod, aluminum, black

color, with unique anchor system. Max

height: 4.9ft (1.5m), Min height: 1.7ft

(0.5m). Max load weight: 5kg (11lbs).

With removable quick release plate. Fits

with most Spypoint products.

LIMITED WARRANTY

This SPYPOINT WiFi monitoring system, designed by

GG Telecom, is covered by a one (1) year warranty on material

and workmanship starting on the date of original purchase. The

sales receipt is your proof of purchase and must be presented if

warranty service is needed.

This warranty does not cover any GG Telecom product which

has been subjected to misuse, neglect and accidents or has been

improperly used or maintained. Any modification or tampering of

the product will affect its operation, performance, durability and

void this warranty.

REPAIR SERVICE

Repairs for damages not covered by the warranty will be

subject to a reasonable charge. For technical assistance, write

to [email protected]. Give a description of the problem with

a phone number where you can be reached.

IMPORTANT: Under no circumstances will GG Telecom

accept returned products without a Return Material

Authorization number (RMA).

WWW.SPYPOINT.COM

Note: For the latest update of the user manual, refer to our website.

The version number of this manual is on page 2.

32 33

Français

Merci d’avoir choisi le système de surveillance

SPYPOINT WiFi. Ce manuel d’utilisation vous permettra d’utiliser

votre nouvel appareil de façon optimal. Pour la plus récente

version du manuel d’utilisateur ou pour toutes informations

additionnelles, consultez notre site web au www.spypoint.com.

Si vous désirez obtenir de l’information ou vous abonner au service

mySPYPOINT, rendez-vous au www.myspypoint.com.

34 35

Français

SPÉCIFICATIONS

Enregistrement Photo:

Résolution photo 8 MP

Format de fichier photo JPG

Option Multi-photos Jusqu’à 6 photos par détection

Option Time Lapse Intervalles prédéfinis

de 10 min à 2h

Information imprimée sur

photo

Date, heure, température

et phase de lune

Mode de capture Couleur de jour,

noir et blanc de nuit

Enregistrement Vidéo:

Résolution vidéo 640 x 480

Format de fichier vidéo MP4

Durée des séquences Réglable de 10 à 90 secondes

Mode de capture Couleur de jour, noir et blanc

de nuit

Enregistrement du son: Automatiquement enregistré

en mode vidéo

Mémoire de stockage: Carte SD/SDHC jusqu’à 32Go

(Pas de mémoire interne)

Visionnement:

Écran intégré TFT-LCD de 3.5" (8.9cm)

Sortie TV Vidéo Composite (PAL/NTSC)

Sortie Ordinateur USB 2.0

Alimentation: (accessoires vendus séparément,

voir section «Options disponibles»)

Piles alcalines ou au lithium 8x AA

Bloc pile lithium Bloc pile rechargeable

(LIT-09/LIT-C-8)

Externe (Prise 12V) Batterie 12 volts

(BATT-12/KIT-12V) /

Adaptateur 12 volts (AD-12V)

Panneau solaire

(Prise 12V)

Panneau solaire (SP-12V)

combiné avec bloc pile lithium

(LIT-09/LIT-C-8)

Système de détection:

Détecteur de mouvement PIR

Angle de détection 30°

Distance de détection Réglable de 2 à 15 mètres

Délai entre chaque

détection

Réglable de 1 à 30 minutes

*Réglage additionnel de 10 sec.

(voir section «Menu de

configuration»)

Option Électricité

(Branchement à une prise

électrique seulement)

Délai de détection instantané

Système d’éclairage de nuit:

DEL 48 DEL

Type DEL infrarouges

Exposition Ajustement automatique

de la puissance de

l’éclairage infrarouge

Angle de champ de vision

optique: 50°

Système de transmission

Wi-Fi: • Pour le mode «Chasse», le

réseau Wi-Fi de la caméra est

activé par la télécommande.

• Pour le mode «Sécurité», un

réseau domestique sans fil est

nécessaire.

• Pour le mode «mySPYPOINT»,

un réseau domestique sans

fil est nécessaire ainsi qu'un

abonnement mySPYPOINT.

Pour plus d’informations,

consultez le www.myspypoint.

com

36 37

Français

Configuration de la

caméra: • Pour le mode «Chasse», la

caméra peut être configurée

à distance sur le site

www."nomdelacaméra".com via

l'activation du réseau Wi-Fi de la

caméra avec la télécommande.

• Pour le mode «Sécurité»,

configurable seulement à partir de

la caméra.

• Pour le mode «mySPYPOINT»,

la caméra peut être configurée

à distance à partir du site web

mySPYPOINT (abonnement

requis).

Logiciels: • Les logiciels «SPYPOINT

Security manager» et «SPYPOINT

Hunting photos downloader» sont

disponibles sur

www.spypoint.com

• Ces logiciels sont compatibles

avec Windows seulement.

Technologie Remos: Cette caméra est compatible avec

la technologie Remos (voir section

«Technologie Remos»).

Recommandations:

Température de

fonctionnement

(-20 °C à + 50 °C) (-4 °F à +122 °F)

Température de remisage (-30 °C à + 75 °C) (-22 °F à +167 °F)

CONTENU DE L’EMBALLAGE

• Caméra modèle SPYPOINT WiFi

• Télécommande RC-1

• Antenne Wi-Fi 2.4 GHz

• Courroie d'installation

• Câbles USB/Audio-vidéo

• Manuel d'utilisation

ALIMENTATION

Le niveau des piles est indiqué dans le coin supérieur gauche, lorsque

la caméra est en mode «Test». Lorsqu’il ne reste qu’une seule ligne,

la caméra continue de prendre des photos, mais nous suggérons

fortement de changer les piles avant qu’elles ne soient vides

(voir figure plus bas).

PILES AA

La caméra requiert l’utilisation de 8 piles AA (1.5V). L’emploi de

piles alcalines ou au lithium est fortement recommandé. À noter

que la tension des piles AA rechargeables (1.2V) est insuffisante

pour alimenter la caméra. Lors de l’installation de piles AA,

glisser le commutateur du compartiment des piles à «ALK»

(c.-à-d. alcaline). Insérer les piles dans le sens indiqué, la polarité

des piles doit être respectée. Nous recommandons d’utiliser des

piles neuves pour assurer le rendement maximal de la caméra.

BLOC PILE LITHIUM

La caméra peut être alimentée au moyen d’un bloc pile lithium

rechargeable LIT-09/LIT-C-8 (vendu séparément, voir section

«Options disponibles»). Ce type de pile est moins affecté par

le froid et offre un rendement jusqu’à 3 fois supérieur aux piles

alcalines. Lors de l’installation d’un bloc pile lithium, glisser le

commutateur du compartiment des piles à «LIT-09 ». Insérer la pile

lithium dans le sens indiqué (voir figure plus bas).

RESET

ALK

LIT-09

38 39

Français

EXTERNE

La caméra peut être alimentée au moyen d’une source externe de

12 volts telle qu'une batterie 12 volts (BATT-12/KIT-12V, vendu

séparément) ou un adaptateur 12 volts (AD-12V, vendu séparément).

Lors d’un branchement 12 volts, il est suggéré de retirer les piles

AA pour éviter une surcharge. Lors d’un branchement 12 volts,

glisser le commutateur du compartiment des piles à «ALK»

(c.-à-d. alcaline). Si ce branchement est combiné à un

bloc pile lithium, glisser le commutateur à «LIT-09». Pour

connaître les accessoires disponibles pour l’alimentation

12 volts, voir section «Options disponibles».

PANNEAU SOLAIRE

Ce modèle offre la possibilité d’un branchement à un panneau

solaire SP-12V (vendu séparément, voir section «Options

disponibles») permettant de maintenir la charge du bloc pile lithium.

Lors de l’installation du bloc pile lithium rechargeable, glisser le

commutateur à l’intérieur du compartiment des piles à «LIT-09»

pour activer le système de recharge avec le panneau solaire.

MÉMOIRE DE STOCKAGE

L’utilisation d’une carte mémoire (vendue séparément, voir section

«Options disponibles») est nécessaire au fonctionnement de la

caméra. Lorsque le mode «Photo» ou «Vidéo» est sélectionné,

l’écran affiche «Pas de carte mémoire» si la carte SD est absente. La

caméra accepte les cartes mémoires de type SD ou SDHC jusqu’à

une capacité de 32Go. Avant d’insérer ou de retirer une carte

mémoire, éteindre la caméra pour éviter tout dommage aux fichiers.

Si la carte mémoire est pleine, l’écran affiche «Carte mémoire

pleine» lorsque le mode «Photo», «Vidéo» est sélectionné. L'espace

utilisé sur la carte mémoire est exprimé en pourcentage dans le coin

supérieur droit de l'écran lorsque la caméra est en mode «Test».

Voici un tableau de la quantité approximative de photos et de la

durée vidéo pouvant être enregistrées avec différentes capacités de

cartes mémoire.

2.0Go 4.0Go 8.0Go 32Go

Photo

8 MP 1190 2380 4760 19040

Vidéo

640 x 480 65 min 2h10 4h10 16h40

DEL «BUSY»

La lumière «BUSY» située à la droite de l’écran, s’allume lorsque

la caméra enregistre un fichier et clignote lors de l'activation du

réseau Wi-Fi.

MENU PRINCIPAL

Utilisez les boutons « ▲ » et « ▼ » pour naviguer sur l’interface

ou modifier une sélection, le bouton «OK» pour sélectionner et le

bouton «BACK» pour retourner au menu précédent.

Les informations suivantes sont affichées sur l'écran du menu

principal:

1.Numéro de série

2.Version du logiciel

1. 2.

Seite laden ...

SPYPOINT S-WiFi model Benutzerhandbuch

Marke: SPYPOINT

Modell: S-WiFi model

Kategorie: Action-Sportkameras

Typ: Benutzerhandbuch

PDF Herunterladen

Bericht

in anderen Sprachen

English: SPYPOINT S-WiFi model User manual
français: SPYPOINT S-WiFi model Manuel utilisateur

SPYPOINT S-WiFi model Benutzerhandbuch

SPYPOINT S-WiFi model Benutzerhandbuch

in anderen Sprachen

Verwandte Papiere

Sonstige Unterlagen