Aeg-Electrolux L82470BI Benutzerhandbuch

Marke: Aeg-Electrolux

Modell: L82470BI

Kategorie: Waschmaschinen

Typ: Benutzerhandbuch

USER

MANUAL

EN User Manual

Washing Machine

L 82470 BI

DE Benutzerinformation

Waschmaschine

CONTENTS

1. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3. TECHNICAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

4. PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

5. CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

6. WASHING PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

7. CONSUMPTION VALUES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

8. FIRST USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

9. DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

10. HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

11. CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

12. TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

13. INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

14. BUILDING IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable

performance for many years, with innovative technologies that help make life simpler –

features you might not find on ordinary appliances. Please spend a few minutes reading to get

the very best from it.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.aeg.com

www.aeg.com/productregistration

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

We recommend the use of original spare parts.

When contacting Service, ensure that you have the following data available.

The information can be found on the rating plate. Model, PNC, Serial Number.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

www.aeg.com

1. SAFETY INFORMATION

Before the installation and use of the appliance, careful-

ly read the supplied instructions. The manufacturer is

not responsible if an incorrect installation and use cau-

ses injuries and damages. Always keep the instructions

with the appliance for future reference.

1.1 Children and vulnerable people safety

WARNING!

Risk of suffocation, injury or permanent disability.

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved.

• Do not let children play with the appliance.

• Keep all packaging away from children.

• Keep all detergents away from children.

• Keep children and pets away from the appliance door

when it is open.

• If the appliance has a child safety device, we recom-

mend you activate it.

• Cleaning and user maintenance shall not be made by

children without supervision.

1.2 General Safety

• Before maintenance, deactivate the appliance and

disconnect the mains plug from the mains socket.

• Do not change the specification of this appliance.

• Obey the maximum load volume of 7 kg (refer to the

“Programme chart” chapter).

ENGLISH 3

• If the supply cord is damaged, it must be replaced by

the manufacturer, its service agent or similarly quali-

fied persons in order to avoid a hazard.

• The operating water pressure (minimum and maxi-

mum) must be between 0,5 bar (0,05 MPa) and 8 bar

(0,8 MPa)

• The ventilation openings in the base (if applicable)

must not be obstructed by a carpet.

• The appliance is to be connected to the water mains

using the new supplied hose-sets. Old hose sets must

not be reused.

SAFETY INSTRUCTIONS

2.1 Installation

• Remove all the packaging and the

transit bolts.

• Keep the transit bolts. When you

move the appliance again you must

block the drum.

• Do not install or use a damaged appli-

ance.

• Do not install or use the appliance

where the temperature is less than 0

°C or where it is exposed to the

weather.

• Obey the installation instruction sup-

plied with the appliance.

• Make sure that the floor where you in-

stall the appliance is flat, stable, heat

resistant and clean.

• Do not install the appliance where the

appliance door can not be fully

opened.

• Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

• Make sure that there is air circulation

between the appliance and the floor.

• Adjust the feet to have the necessary

space between the appliance and the

carpet.

Electrical connection

WARNING!

Risk of fire and electrical shock.

• The appliance must be earthed.

• Make sure that the electrical informa-

tion on the rating plate agrees with

the power supply. If not, contact an

electrician.

• Always use a correctly installed shock-

proof socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug and to the mains cable.

Should the appliance power supply

cable need to be replaced, this must

be carried out by our Service Centre.

• Connect the mains plug to the mains

socket only at the end of the installa-

tion. Make sure that there is access to

the mains plug after the installation.

• Do not pull the mains cable to discon-

nect the appliance. Always pull the

mains plug.

• Do not touch the mains cable or the

mains plug with wet hands.

• This appliance complies with the

E.E.C. Directives.

www.aeg.com

Water connection

• Make sure not to cause damage to the

water hoses.

• The appliance is to be connected to

the water mains using the new sup-

plied hose-sets. Old hose sets must

not be reused.

• Before you connect the appliance to

new pipes or pipes not used for a long

time, let the water flow until it is clean.

• The first time you use the appliance,

make sure that there is no leakage.

2.2 Use

WARNING!

Risk of injury, electrical shock,

fire, burns or damage to the ap-

pliance.

• Use this appliance in a household en-

vironment.

• Do not change the specification of this

appliance.

• Obey the safety instructions on the

detergent packaging.

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

• Do not touch the glass of the door

while a programme operates. The

glass can be hot.

• Make sure that you remove all metal

objects from the laundry.

• Do not put a container to collect pos-

sible water leakage under the appli-

ance. Contact the Service to ensure

which accessories can be used.

2.3 Care and Cleaning

WARNING!

Risk of injury or damage to the

appliance.

• Before maintenance, deactivate the

appliance and disconnect the mains

plug from the mains socket.

• Do not use water spray and steam to

clean the appliance.

• Clean the appliance with a moist soft

cloth. Only use neutral detergents. Do

not use abrasive products, abrasive

cleaning pads, solvents or metal ob-

jects.

2.4 Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent

children and pets to get closed in the

appliance.

3. TECHNICAL INFORMATION

Dimensions Width / Height / Depth 596 / 820 / 544 mm

Total depth 560 mm

Electrical connection: Voltage

Overall power

Fuse

Frequency

220-230 V

2000 W

10 A

50 Hz

Level of protection against ingress of solid particles

and moisture ensured by the protective cover, ex-

cept where the low voltage equipment has no pro-

tection against moisture

IPX4

ENGLISH 5

Water supply pressure Minimum 0,5 bar (0,05 MPa)

Maximum 8 bar (0,8 MPa)

Water supply

Cold water

Maximum load Cotton 7 kg

Spin speed Maximum 1400 rpm

Connect the water inlet hose to a water tap with a 3/4'' thread.

4. PRODUCT DESCRIPTION

7 8 9

1 2

Detergent dispenser

Control panel

Door handle

Rating plate

Drain pump lter

Feet for the appliance level

Water drain hose

Mains cable

Water inlet hose

Feet for the appliance level

4.1 Accessories

1 2

Spanner

To remove the transit bolts.

Plastic caps

To close the holes on the rear side

of the cabinet after the removal of

the transit bolts.

Anti-flood inlet hose

To prevent possible leakage

Plastic hose guide

To connect the drain hose on the

edge of a sink.

www.aeg.com

4.2 Child safety device

• When you activate this device, you

cannot close the door. This prevents

children or pets to be closed in the

drum. To activate the device, turn it

clockwise, until the groove is horizon-

tal. To deactivate the device, turn it

counterclockwise, until the groove is

vertical.

5. CONTROL PANEL

1 2 3 4 5 6 7 8 9

Programme selector dial

TEMPERATURE button

SPIN button

OPTION button

Ok button

TIME SAVING button

Display

START/PAUSE button

DELAY START button

5.1 Display

I H G F E

A B D

Temperature indicator and COLD symbol.

ENGLISH 7

Spin Speed indicator, RINSE HOLD , NIGHT CYCLE - symbols.

Programme progress display: PREWASH , MAIN WASH , RINSE

, SPIN , DRAIN , OVERDOSAGE

• The programme progress display shows the different phases of the

selected programme.

• During washing, a black line blinks under the running phase sym-

bol. At the end of each phase, the line stops blinking and remains

If the symbol comes on, it indicates that too much deter-

gent has been used.

CHILD SAFETY LOCK - symbol.

DELAY START - symbol.

The display shows the following information:

• Duration of the selected programme

– After setting a programme, the duration is displayed in hours and

minutes (for example

– After the programme has started, the remaining time is updated

every minute.

• Delay start

– When setting a delay start, the display shows the delay time (20

hours max.) for about 3 seconds (for example

), and then it

shows again the programme duration.

– The delay time value decreases by one unit every hour and then,

one hour before the end of the programme, the time decreases

every minute.

• Incorrect option setting

– In case of wrong setting the display shows the message Err and

the yellow light of the button 8 starts blinking.

• Alarm codes

– If an operating problems occur, the display can show some alarm

codes, for example

(see chapter «Troubleshooting»).

• End of the programme

–

At the end of the programme the display shows blinking zero

the symbol

disappears and the door can be opened.

G TIME SAVING - option symbol.

DOOR - symbol

• This symbol indicates if the door can be opened:

– The symbol is on: the door cannot be opened. The appliance is

performing a washing programme.

– The symbol is off: the door can be opened. The washing pro-

gramme is finished.

Available options: PREWASH , STAIN , SENSITIVE , EXTRA

RINSE

www.aeg.com

5.2 Acoustic signals

The machine is provided with an acous-

tic device, which sounds in the following

cases:

• at the end of the cycle

• in the event of operating problems.

By pressing the 3 and 4 buttons simulta-

neously for some seconds, the acoustic

signal is deactivated (except for the

events of operating problems). By press-

ing these two buttons again, the acous-

tic signal is reactivated.

5.3 Child safety lock

This device permits you to leave the ap-

pliance unsupervised and not to worry

that children might be injured by or

cause damage to the appliance.

This function remains able also when the

washing machine is not working.

There are two different ways to set this

option:

• Before pressing button 8: it will be im-

possible to start the machine.

• after pressing button 8: it will be im-

possible to change any other pro-

gramme or option.

To enable or disable this option press si-

multaneously for about 6 seconds but-

tons 4 and 5 until the symbol

comes

on or disappears from the display.

5.4 EXTRA RINSE option

With this function you can keep the extra

rinse function permanently on when you

set a new programme.

• To activate the function press button 2

and button 3 at the same time until

the display shows the symbol

• To deactivate the function press but-

ton 2 and button 3 at the same time

until the symbol

goes off.

6. WASHING PROGRAMMES

Programme

Maximum and Minimum Temperature

Type of Laundry

Maximum Load

Cycle De-

scription

Options

Cottons

95° - Cold

Max. load 7 kg - Reduced load 3 kg

White and coloured cotton (normally

soiled items).

Main wash

Rinses

Long spin

SPIN REDUCTION

NIGHT CYCLE

RINSE HOLD

PREWASH

STAIN

SENSITIVE

EXTRA RINSE

TIME SAVING

EXTRA RINSE

Synthetics

60° - Cold

Max. load 3 kg - Reduced load 2 kg

Synthetic or mixed fabrics: underwear,

coloured garments, non-shrink shirts, blou-

ses.

Main wash

Rinses

Short spin

SPIN REDUCTION

NIGHT CYCLE

RINSE HOLD

PREWASH

STAIN

TIME SAVING

EXTRA RINSE

ENGLISH 9

Programme

Maximum and Minimum Temperature

Type of Laundry

Maximum Load

Cycle De-

scription

Options

Easy Iron

60° - Cold

Max. load 1 kg

Synthetic fabrics to be gentle washed

and spun.

The laundry is gently washed and spun to

avoid any creasing. Furthermore the ma-

chine will perform additional rinses.

Main wash

Rinses

Short spin

SPIN REDUCTION

RINSE HOLD

PREWASH

EXTRA RINSE

Delicates

40° - Cold

Max. load kg 3 - Reduced load kg 2

Delicate fabrics: acrylics, viscose, polyest-

er.

Main wash

Rinses

Short spin

SPIN REDUCTION

NIGHT CYCLE

RINSE HOLD

PREWASH

STAIN

TIME SAVING

EXTRA RINSE

Wool / Silk

40° - Cold

Max. load 2 kg

Machine washable wool as well as for hand

washable woollens and delicate fabrics.

Note: A single or bulky item may cause im-

balance. If the appliance doesn’t perform

the final spin phase, add more items, redis-

tribute the load manually and then select

the spinning programme.

Main wash

Rinses

Short spin

SPIN REDUCTION

NIGHT CYCLE

RINSE HOLD

Sport Jackets

40° - Cold

Max. load 2.5 kg

Sport clothes. Do not use any additives.

Main wash

Rinses

Short spin

SPIN REDUCTION

NIGHT CYCLE

RINSE HOLD

Anti-Allergy

60°

Max. load 7 kg

White cotton items.

This programme removes micro-organisms

thanks to the washing by 60° C and adds on

rinse. In this way the wash is more effective.

Put a special additive for hygiene in the

Stain compartment and set the Stain func-

tion.

Main wash

Rinses

Long spin

SPIN REDUCTION

RINSE HOLD

PREWASH

STAIN

www.aeg.com

Programme

Maximum and Minimum Temperature

Type of Laundry

Maximum Load

Cycle De-

scription

Options

Spin

Max. load 7 kg

Separate spin for hand washed cotton gar-

ments and after programmes with the Rinse

hold option set.

Turn the programme dial to

before set-

ting this programme.

Reduce the spin speed if needed.

Drain

Long spin

SPIN REDUCTION

Drain

Max. load 7 kg

For emptying out the water of the last rinse

in programmes with the Rinse hold option

set.

Draining of

water

Delicate rinses

Max. load 7 kg

Programme for rinsing and spinning items

which have been washed by hand. The ma-

chine performs some rinses, followed by a

final spin. The spin speed can be reduced.

Rinses

Long spin

SPIN REDUCTION

NIGHT CYCLE

RINSE HOLD

EXTRA RINSE

Jeans

60° - Cold

Max. load 3 kg

All items in jeans. Jersey made items with

hi-tech materials.

Main wash

Rinses

Short spin

SPIN REDUCTION

NIGHT CYCLE

RINSE HOLD

PREWASH

20 Min. - 3 kg

30°

Max. load 3 kg

Quick wash for sport items, or cotton and

synthetic items lightly soiled or worn once.

Main wash

Rinses

Short spin

SPIN REDUCTION

Mix 20°

20°

Max. load 3 kg

Special programme for cotton, synthetic

and mixed fabrics with light soil.

Set this programme to decrease the energy

consumption.

Make sure that the detergent is for low

temperature in order to have good washing

results.

Main wash

Rinses

Short spin

SPIN REDUCTION

RINSE HOLD

EXTRA RINSE

ENGLISH 11

Programme

Maximum and Minimum Temperature

Type of Laundry

Maximum Load

Cycle De-

scription

Options

ECO

Cottons Eco

60° - 40°

Max. load 7 kg

White and fast coloured cotton.

Normally soiled cotton items.

The appliance decreases the temperature

and extends the washing time to obtain a

good washing efficiency so saving energy.

Main wash

Rinses

Long spin

SPIN REDUCTION

NIGHT CYCLE

RINSE HOLD

PREWASH

STAIN

EXTRA RINSE

Off

For cancelling the running programme or to switch the machine off .

If using liquid detergents, you must set a programme without prewash

Stain option can be set only at the temperature of 40°C or higher.

If you set the Super Quick option ( button 6), we recommend that you reduce the

maximum load as indicated. Full loading is possible however with somewhat reduced

cleaning results.

The appliance performs the short heating phase if the water temperature is below 20°C.

The appliance can show the temperature setting as “cold”.

STANDARD PROGRAMMES for the Energy Label consumption values. According to

regulation 1061/2010, these programmes are respectively the «standard 60° C cotton

programme» and the «standard 40° C cotton programme». They are the most efficient

programmes in terms of combined energy and water consumption for washing normally

soiled cotton laundry.

Set this programme to have a good washing results and decrease the energy

consumption. The time of the washing programme is extended.

The washing temperature of the washing phase may differ from the temperature

declared for the selected programme.

7. CONSUMPTION VALUES

The data of this table are approximate. Different causes can change the da-

ta: the quantity and type of laundry, the water and ambient temperature.

Programmes Load

(Kg)

Energy

consump-

tion (kWh)

Water con-

sumption

(litre)

Approxi-

mate pro-

gramme

duration

(minutes)

Remain-

ing mois-

ture (%)

Cottons 60 °C 7 1.2 53 140 52

Cottons 40 °C 7 0.7 53 130 52

Synthetics 40

°C

3 0.5 40 80 35

www.aeg.com

Programmes Load

(Kg)

Energy

consump-

tion (kWh)

Water con-

sumption

(litre)

Approxi-

mate pro-

gramme

duration

(minutes)

Remain-

ing mois-

ture (%)

Delicates 40

°C

3 0.55 55 65 35

Wool/Hand

wash 30 °C

2 0.25 58 50 30

Standard cotton programmes

Standard 60

°C cotton

7 0.86 46 189 52

Standard 60

°C cotton

3.5 0.77 36 177 52

Standard 40

°C cotton

3.5 0.51 38 160 52

At the end of spin phase.

Off Mode (W) Left On Mode (W)

0.1 0.98

The information given in the charts above are in compliance with the EU Com-

mission regulation 1015/2010 implementing directive 2009/125/EC.

8. FIRST USE

To activate the drain system, put 2 li-

tre of water in the main wash com-

partment of the detergent dispens-

er.

Put a small quantity of detergent in

the main wash compartment of the

detergent dispenser. Set and start a

programme for cotton at the highest

temperature without laundry. This

removes all possible dirt from the

drum and the tub.

9. DAILY USE

9.1 Loading the laundry

Open the appliance door.

Put the laundry in the drum, one

item at a time. Shake the items be-

fore you put them in the appliance.

Make sure not to put too much laun-

dry in the drum.

Close the door.

ENGLISH 13

Make sure that no laundry stays between

the seal and the door. There is a risk of

water leakage or damage to the laundry.

9.2 Filling the detergent and additives

MAX

The detergent compartment for the prewash phase, the soak

programme and for the stain function.

Add the detergent for prewash, soak and stain remover before

the start of the programme.

The detergent compartment for the washing phase.

If you use a liquid detergent, put it immediately before you start

the programme.

Liquid additives compartment (fabric conditioner, starch).

Put the product in the compartment before you start the pro-

gramme.

This is the maximum level for the quantity of liquid additives.

Always obey the instructions that you find on the packaging of the de-

tergent products.

9.3 Setting the programme

(knob 1 )

Turn the programme selector dial to the

required programme.

The programme dial determines the

type of washing cycle (e.g. water level,

drum movement, number of rinses) and

the washing temperature according to

the type of laundry.

The pilot light of button 8 starts blinking.

The programme dial can be turned ei-

ther clockwise or anticlockwise.

= Reset programme / switching OFF

of the machine

www.aeg.com

If you turn the programme dial to

another programme when the

appliance is working, the yellow

pilot light of button 8 blinks 3

times. The display shows the

message Err to indicate a wrong

selection. The machine will not

perform the new set programme.

9.4 SETTING THE

TEMPERATURE (Button 2)

When setting a programme, the

appliance automatically propo-

ses the default temperature pro-

vided for that programme.

Press the button 2 repeatedly to in-

crease or decrease the temperature, if

you want your laundry to be washed at a

different temperature.

The cold wash is indicated with - - and

the symbol

For the maximum and the mini-

mum available wash water tem-

perature, see «Washing pro-

grammes».

9.5 SETTING THE SPIN SPEED

(button 3)

When setting a programme, the

appliance automatically propo-

ses the maximum spin speed

provided for that programme.

Press the button 3 repeatedly to change

the spin speed.

RINSE HOLD

If setting this option the water of the last

rinse is not emptied out to prevent the

fabrics from creasing. At the end of the

programme,

and the symbol ap-

pear on the display, the symbol

remains lit, the light of button 8 goes off

and the door is blocked to indicate that

the water must be emptied out.

NIGHT CYCLE

If setting this option, the appliance does

not drain the water of the last rinse and

the laundry is not wrinkled. All spinning

phases are suppressed so the washing

programme becomes noiseless and it

can be set in the night or during the

cheapest power rate hours. In some pro-

grammes the rinses are performed with

more water.

At the end of the programme,

and the

symbol

appear on the display, the

symbol

remains lit, the light of

button 8 goes off and the door is

blocked to indicate that the water must

be emptied out.

To empty out the water, please read

chapter «At the end of the pro-

gramme».

9.6 SETTING THE OPTIONS

(BUTTON 4)

Depending on the programme, different

functions can be combined.

Not all the options are compati-

ble among themselves. The sym-

bols of the incompatible options

disappear.

Anyway, if an option, which is not

compatible with the set washing

programme or any other option,

is selected, the Err message is

displayed for few seconds and

the yellow pilot of button 8 light

starts blinking.

Set the options after you have set the

programme but before pressing the but-

ton 8. Press the button 4: all the option

symbols appear on the display.

To scroll all the available options, press

the button 4. The relative symbol ap-

pears on the display and starts blinking.

For the compatibility among the

options and the washing pro-

grammes see chapter «Washing

Programmes».

CONFIRM YOUR CHOICE

(BUTTON 5)

Press the button 5 to activate and con-

firm your choice. A black dash appears

under the selected symbol to indicate

that this option has been set. Press the

button 5 to deactivate the option.

After setting the options, wait about few

seconds until the display gets back to

the default status. The symbols of the

set options appear on the display.

ENGLISH 15

9.7 PREWASH option

Set the PREWASH option to prewash

your laundry at 30°C before the main

wash. The prewash ends with a short

spin in programmes for cotton and syn-

thetic fabrics, whereas in the pro-

grammes for delicate fabrics the water is

only drained.

The symbol

appears on the display.

The Prewash option is recommended for

heavily soiled laundry.

9.8 STAIN option

Set the STAIN option to treat heavily

soiled or stained laundry with stain re-

mover (extended main wash with time

optimized stain action phase). The sym-

bol

appears on the display.

This option is not available with a tem-

perature lower than 40°C.

If you wish to perform a programme with

the STAIN option, put the stain remover

in the compartment

The PREWASH option and the STAIN

option cannot be selected together.

9.9 SENSITIVE option

Set the SENSITIVE option to reduce the

washing intensity. The symbol

ap-

pears on the display. The appliance adds

one rinse.

The SENSITIVE option cannot be selec-

ted with the EXTRA RINSE option.

The SENSITIVE option is recommended

to wash non fast colored items and for

frequently washed items.

9.10 EXTRA RINSE option

This appliance is designed for saving wa-

ter. However, for people with a very deli-

cate skin (allergic to detergents) it may

be necessary to rinse the laundry using

an extra quantity of water. The symbol

appears on the display.

9.11 SETTING THE TIME

SAVING option (button 6)

This option allows you to modify the

washing time, automatically proposed

by the appliance.

Press the button 6 once

The symbol appears on the dis-

play. The washing duration will be

reduced to wash daily soiled laun-

dry.

Press the button 6 twice

The washing duration will be re-

duced to wash lightly soiled laundry

or items that have been used or

worn for a short time.

The display shows the decreased wash-

ing time.

9.12 STARTING THE

PROGRAMME (button 8)

Press the button 8 to start the pro-

gramme. The red light of the button 8

stops blinking.

The symbol

appears on the dis-

play to indicate that the appliance has

started operating and the door is

locked.

To interrupt a programme which is run-

ning, press the button 8: the red light of

the button 8 starts blinking.

To restart the programme from the point

at which it was interrupted, press the

button 8 again. If you have chosen a de-

layed start the machine will begin the

countdown.

If an incorrect option is selected, the yel-

low light of the button 8 blinks 3 times

and the message Err is displayed for a

few seconds.

9.13 SETTING THE DELAY

START

(button 9)

Before you start the programme, if you

wish to delay the start, press the button

9 repeatedly, to set the desired delay.

The symbol

appears on the display.

The wash programme can be delayed

from 30 min. - 60 min. - 90 min., 2 hours

and then by 1 hour up to a maximum of

20 hours.

The set delay time value appears on the

display for about 3 seconds, then the du-

ration of the programme appears again.

Set this option after you have set the

programme and before you press the

button 8.

www.aeg.com

You can modify or cancel the delay time

at any moment, before you press the

button 8.

The door will be locked throughout the

delay time. If you wish to add laundry in

the appliance during the delay time,

press the button 8 to set the machine to

pause. When the symbol

disap-

pears , the door can be opened. Add

the laundry, close the door and press the

button 8 again.

Setting the delayed start.

• Set the programme and the required

options.

• Set the delay start.

• Press button 8: the appliance starts its

hourly countdown. The programme

starts after the selected delay has ex-

pired.

Cancelling the delayed start

• Press the button 8 to set the appliance

to PAUSE;

•

Press button 9 until the symbol

’ is

displayed;

• Press the button 8 again to start the

programme.

The set delay can be changed

only after you have set the wash-

ing programme again.

The Delay Start cannot be set with Drain

programme.

9.14 Altering an option or a

running programme

It is possible to change some options

before the programme carries it out. Be-

fore you make any change, you must

press the button 8 to pause the appli-

ance.

Changing a running programme is possi-

ble only by resetting it.

Turn the programme dial to

and then

to the new programme position.

Press the 8 button again to start the new

programme. The washing water in the

tub will not emptied out.

9.15 Interrupting a

programme

Press the button 8 to interrupt a pro-

gramme which is running, the corre-

sponding light starts blinking. Press the

button again to restart the programme.

9.16 Cancelling a programme

Turn the selector dial to to cancel a

programme which is running. Now you

can select a new programme.

9.17 Opening the door after

the programme has started

First press the button 8 to set the appli-

ance to pause by .

•

If the symbol

disappears, the

door can be opened;

•

If the symbol

doesn’t go off, it

means that the appliance is already

heating or that the water level is too

high. In this case the door cannot be

opened;

• If you cannot open the door but you

need to open it, you have to switch

the appliance off by turning the selec-

tor dial to

/Off. After a few mi-

nutes the door can be opened (pay

attention to the water level and

temperature!);

After closing the door, it is necessary to

set the programme again and to press

the button 8.

9.18 At the end of the

programme

The appliance stops automatically, the

light of button 8 goes off. A blinking

appears on the display and the acoustic

signal sounds for some minutes. The

symbol

disappears.

If you have chosen a programme or an

option that ends with water in the tub,

follow the below instruction to empty

the water out. The drum continues to run

at regular intervals until the water drain-

ing.

To empty the water out

• Turn the programme selector dial to

/Off.

• Set the DRAIN or SPIN programme.

• If needed, press the button 3 to re-

duce the spin speed.

• Press the button 8.

ENGLISH 17

• When the programme has finished the

display shows a blinking

. The sym-

bols

disappears. The door can

be opened.

Turn the programme selector dial to

/Off to switch the appliance off. Remove

the laundry from the drum and carefully

check that the drum is empty.

If you do not intend to carry out another

wash, close the water tap. Leave the

door open to prevent the formation of

mildew and unpleasant smells.

Stand by : once the programme has fin-

ished after a few minutes the energy sav-

ing system will be enabled. The bright-

ness of the display is reduced. By press-

ing any button the appliance will come

out of the energy saving status.

10. HINTS AND TIPS

10.1 The laundry load

• Divide the laundry in: white, coloured,

synthetics, delicates and wool.

• Obey the washing instructions that are

on the laundry care labels.

• Do not wash together white and col-

oured items.

• Some coloured items can discolour

with the first wash. We recommend

that you wash them separately for the

first times.

• Button up pillowcases, close zippers,

hooks and poppers. Tie up belts.

• Empty the pockets and unfold the

items.

• Turn inside out multilayered fabrics,

wool and items with painted illustra-

tions.

• Remove hard stains.

• Wash with a special detergent heavy

soil stains.

• Be careful with the curtains. Remove

the hooks or put the curtains in a

washing bag or pillowcase.

• Do not wash in the appliance :

– Laundry without hems or with cuts

– Underwired bras.

– Use a washing bag to wash small

items.

• A very small load can cause balance

problems with the spin phase. If this

occurs, adjust manually the items in

the tub and start the spin phase again.

10.2 Stubborn stains

For some stains, water and detergent is

not sufficient.

We recommend that you remove these

stains before you put the items in the

appliance.

Special stain removers are available. Use

the special stain remover that is applica-

ble to the type of stain and fabric.

10.3 Detergents and additives

• Only use detergents and additives

specially made for washing machines.

• Do not mix different types of deter-

gents.

• To help the environment, do not use

more than the correct quantity of de-

tergent.

• Obey the instructions that you find on

the on packaging of these products.

• Use the correct products for the type

and colour of the fabric, the pro-

gramme temperature and the level of

soil.

• If you use liquid detergents, do not set

the prewash phase.

• If your appliance has not the deter-

gent dispenser with the flap device,

add the liquid detergents with a dos-

ing ball.

10.4 Water hardness

If the water hardness in your area is high

or moderate, we recommend that you

use a water softener for washing ma-

chines. In areas where the water hard-

www.aeg.com

ness is soft it is not necessary to use a

water softener.

To know the water hardness in your area,

contact your local water authority.

Obey the instructions that you find on

the packaging of the products.

Equivalent scales measure the water

hardness:

• German degrees (°dH).

• French degrees (°TH).

• mmol/l (millimol for each litre - inter-

national unit for the hardness of wa-

ter).

• Clarke degrees.

Water hardness table

Level Type

Water hardness

°dH °T.H. mmol/l Clarke

1 soft 0-7 0-15 0-1.5 0-9

2 medium 8-14 16-25 1.6-2.5 10-16

3 hard 15-21 26-37 2.6-3.7 17-25

4 very hard > 21 > 37 >3.7 >25

11. CARE AND CLEANING

WARNING!

Disconnect the appliance from the mains

supply before you clean it.

11.1 Descaling

The water we use contains limescale. If it

becomes necessary, use a water softener

to remove limescales.

Use a special product made for washing

machines. Obey the instructions that you

find on the packaging of the manufactur-

er.

Do this separately from the laundry

wash.

11.2 External cleaning

Clean the appliance only with soap and

warm water. Fully dry all the surfaces.

CAUTION!

Do not use alcohol, solvents or

chemical products.

11.3 Door seal

Regularly examine the seal and remove

all objects from the inner part.

11.4 Drum

Regularly examine the drum to prevent

limescale and rust particles.

Only use special products to remove rust

particles from the drum.

To do this:

• Clean the drum with special product

for stainless steel.

• Start a short programme for cotton at

the maximum temperature with a

small quantity of detergent.

ENGLISH 19

11.5 Detergent dispenser

To clean the dispenser:

MAX

Press the lever.

Pull the dispenser out.

MAX

Remove the top part of the liquid

additive compartment.

Clean all the parts with water.

Clean the dispenser recess with a

brush.

Put back the dispenser in the recess.

11.6 Drain pump

The pump should be inspected regularly

and particularly if:

• the appliance does not empty and/or

spin;

• the appliance makes an unusual noise

during draining due to objects such as

safety pins, coins etc. blocking the

pump;

• a problem with water draining is de-

tected (see chapter “Troubleshoot-

ing” for more details).

WARNING!

Before unscrewing the pump

cover, switch the appliance off

and remove the mains plug from

the socket.

Proceed as follows:

Unplug the appliance.

If it is necessary, wait until the water

has cooled down.

www.aeg.com

Seite laden ...

Aeg-Electrolux L82470BI Benutzerhandbuch

Marke: Aeg-Electrolux

Modell: L82470BI

Kategorie: Waschmaschinen

Typ: Benutzerhandbuch

PDF Herunterladen

Bericht

in anderen Sprachen

English: Aeg-Electrolux L82470BI User manual

Aeg-Electrolux L82470BI Benutzerhandbuch

Aeg-Electrolux L82470BI Benutzerhandbuch

in anderen Sprachen

Verwandte Papiere

Sonstige Unterlagen