Aeg-Electrolux L64857L Benutzerhandbuch

LAVAMAT 64857L

User manual Washing Machine

Benutzerinformation Waschmaschine

Thank you for choosing one of our high-quality products.

To ensure optimal and regular performance of your appliance please read this

instruction manual carefully. It will enable you to navigate all processes perfectly

and most efficiently. To refer to this manual any time you need to, we recommend

you to keep it in a safe place. And please pass it to any future owner of the appliance.

We wish you much joy with your new appliance.

CONTENTS

OPERATING INSTRUCTIONS 3

SAFETY INFORMATION 3

General safety 3

Installation 3

Use 4

Child Safety 4

PRODUCT DESCRIPTION 5

Detergent dispenser drawer 6

CONTROL PANEL 6

DISPLAY 7

Indicator pilot lights (10) 8

PERSONALIZATION 8

Acoustic signals 8

Child safety lock 8

DAILY USE 9

Load the laundry 9

Measure out the detergent and the fabric

softener 9

Select the required programme by means of

programme selector dial (1) 10

Select the desired TEMPERATURE (Button 2)

10

Select the SPIN speed or the RINSE HOLD

option (Button 3) 11

Programme option buttons 11

Select the STAIN option (Button 4) 11

SENSITIVE option (Button 5) 11

Select the TIME SAVING option (Button 6)

11

Select the START/PAUSE (Button 8) 12

Select the DELAY START (Button 9) 12

Select an additional rinse (EXTRA RINSE)

12

Altering an option or a running programme

13

Interrupting a programme 13

Cancelling a programme 13

Opening the door after the programme has

started 13

At the end of the programme 13

HELPFUL HINTS AND TIPS 14

Sorting out the laundry 14

Before loading the laundry 14

Removing stains 14

Detergents and additives 15

Quantity of detergent to be used 15

Degrees of water hardness 15

WASHING PROGRAMMES 16

CARE AND CLEANING 18

Descaling 18

After each wash 19

Maintenance wash 19

External cleaning 19

Detergent dispenser drawer 19

Washing drum 19

Door seal 20

Drain pump 20

Cleaning the water inlet filters 22

Emergency emptying out 23

Frost precautions 23

WHAT TO DO IF… 24

TECHNICAL DATA 27

CONSUMPTION VALUES 27

INSTALLATION INSTRUCTIONS 27

INSTALLATION 27

Unpacking 27

Positioning and levelling 30

Water inlet 30

Water-stop device 31

Water drainage 31

ELECTRICAL CONNECTION 32

ENVIRONMENT CONCERNS 33

2

Contents

Packaging materials 33 Ecological hints 33

Subject to change without notice

OPERATING INSTRUCTIONS

SAFETY INFORMATION

Read carefully & keep for future reference.

• The safety of Your appliance complies with the industry standards and with legal re-

quirements on the safety of appliances. However, as manufacturers, we feel it is our duty

to provide the following safety notes.

• It is most important that this instruction book should be retained with the appliance for

future reference. Should the appliance be sold or transferred to another owner, or should

you move house and leave the appliance, always ensure that the book is supplied with

the appliance in order that the new owner can get to know the functioning of the

appliance and the relevant warnings.

• You MUST read them carefully before installing or using the appliance.

• Before first starting up, check the appliance for any damage incurred during transport.

Never connect up a damaged appliance . If parts are damaged, contact your supplier.

• If the appliance is delivered in the winter months when there are minus temperatures.

Store it at room temperature for 24 hours before using for the first time.

General safety

• It is dangerous to alter the specifications or attempt to modify this product in any way.

• During high temperature wash programmes the door glass may get hot. Do not touch

it!

• Make sure that small pets and children do not climb into the drum. To avoid this, please

check into the drum before using.

• Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp

material can cause extensive damage and must not be placed into the machine.

• Only use the advised quantities of fabric softener and detergent. Damage to the fabric

can ensue if you over-fill. Refer to the manufacturer’s recommendations of quantities.

• Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case

as it is possible for such items to slip down between the tub and the inner drum.

• Do not use your washing machine to wash articles with whalebones, material without

hems or torn material.

• Always unplug the appliance and turn off the water supply after use, cleaning and

maintenance.

• Under no circumstances should you attempt to repair the machine yourself. Repairs

carried out by inexperienced people may cause injury or serious malfunctioning. Contact

your local Service Centre. Always insist on genuine spare parts.

Installation

• This appliance is heavy. Care should be taken when moving it.

Safety information

3

132945551-00-142010

• When unpacking the appliance, check that it is not damaged. If in doubt, do not use it

and contact the Service Centre.

• All packing and transit bolts must be removed before use. Serious damage can occur to

the product and to property if this is not adhered to. See relevant section in the user

manual.

• After having installed the appliance, check that it is not standing on the inlet and drain

hose and the worktop is not pressing the electrical supply cable against the wall.

• If the machine is situated on a carpeted floor, please adjust the feet in order to allow air

to circulate freely under the appliance.

• Always be sure, that there is no water leakage from hoses and their connections after

the installation.

• If the appliance is installed in a location subject to frost, please read the “dangers of

freezing” chapter.

• Any plumbing work required to install this appliance should be carried out by a qualified

plumber or competent person.

• Any electrical work required to install this appliance should be carried out by a qualified

electrician or competent person.

Use

• This appliance is designed for domestic use. It must not be used for purposes other than

those for which it was designed.

• Only wash fabrics which are designed to be machine washed. Follow the instructions on

each garment label.

• Do not overload the appliance. See the Washing Programme Table.

• Before washing, ensure that all pockets are empty and buttons and zips are fastened.

Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass

before washing. Underwired bras must NOT be machine washed.

• Garments which have been in contact with volatile petroleum products should not be

machine washed. If volatile cleaning fluids are used, care should be taken to ensure that

the fluid is removed from the garment before placing in the machine.

• Never pull the power supply cable to remove the plug from the socket; always take hold

of the plug itself.

• Never use the appliance if the power supply cable, the control panel, the working surface

or the base are damaged so that the inside of the washing machine is accessible.

Child Safety

• This appliance is not intended for use by person (including children) with reduced physical

sensory or mental capabilities or lack of experience and knowledge unless they have been

given supervision or instruction concerning use of the appliance by a person responsible

for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• The packaging components (e.g. plastic film, polystyrene) can be dangerous to children

- danger of suffocation! Keep them out of children's reach.

• Keep all detergents in a safe place out of children’s reach.

4

Safety information

• Make sure that children or pets do not climb

inside the drum. To prevent children or pets

becoming trapped inside the drum the ma-

chine incorporates a special feature. To ac-

tivate this device, rotate the button (without

pressing it) inside the door clockwise until

the groove is horizontal. If necessary use a

coin. To disable this device and restore the

possibility of closing the door, rotate the

button anticlockwise until the groove is ver-

tical.

PRODUCT DESCRIPTION

Your new appliance meets all modern requirements for effective treatment of laundry with

low water, energy and detergent consumption.

The ECO VALVE system allows total use of detergent and reduces water consumption so

saving energy.

1

6

3

4

5

2

1 Detergent dispenser drawer

2 Control panel

3 Door opening handle

4 Rating plate

Product description

5

5 Drain pump

6 Adjustable feet

Detergent dispenser drawer

Compartment for detergent used for pre-

wash . The prewash detergent is added at the be-

ginning of the wash programme.

Compartment for powder or liquid detergent

used for main wash .

Compartment for liquid additives (fabric soft-

ener, starch).

Compartment for stain remover used for main

wash with STAIN-option .

CONTROL PANEL

Below is a picture of the control panel. It shows the programme selector dial as well as the

buttons and the pilot lights. These are presented by relevant numbers on the following

pages.

1 2 3 4 5 6 87 9 10

1 Programme selector dial

2 TEMPERATURE button

3 SPIN button

4 STAIN button

5 SENSITIVE button

6 TIME SAVING button

6

Control panel

7 DISPLAY

8 START/PAUSE button

9 DELAY START button

10 Indicator pilot lights

Symbols :

Rinse Hold, Cold

DISPLAY

7.2

7.3

7.1

Duration of selected programme (7.1) :

Duration of selected programme: After selecting a programme, the duration is displayed

in hours and minutes (for example 2.05 ). The duration is calculated automatically on the

basis of the maximum recommended load for each type of fabric. After the programme has

started, the time remaining is updated every minute.

Alarm codes

In the event of operating problems, some alarm codes can be displayed, for example

(see chapter «What to do if...»).

End of programme

When the programme has finished a blinking zero

is displayed, the DOOR pilot light

( 10.2 ), the WASHING pilot light ( 10.1 ) and the pilot light of button 8 go out. The door

can be opened.

Incorrect option selection

If an option which is not compatible with the set wash programme is selected, the message

Err is displayed for a few seconds and the yellow pilot light of button 8 light starts blinking.

Delay Start (7.2)

The selected delay (20 hours max) set by means of the relevant button appears on the

display for a few seconds, then the duration of the previously selected programme is dis-

played. The symbol 7.2 will appear on the display. The delay time value decreases by one

unit every hour. When only 1 hour remains, the time decreases every minute.

Display

7

Child safety lock (7.3)

Indicator pilot lights (10)

After having pressed the button 8 , the FUNC-

TIONING pilot light ( 10.1 ) comes on.

When the pilot light 10.1 comes on this means

that the machine is operating.

The DOOR pilot light ( 10.2 ) indicates if the door

can be opened:

• light on: the door cannot be opened

• light blinking: the door is opening

• light off: the door can be opened

When the appliance is performing additional rin-

ses the EXTRA RINSE pilot light ( 10.3 ) comes on.

To add an additional rinse, please see chapter «Se-

lect an additional rinse».

PERSONALIZATION

Acoustic signals

The machine is provided with an acoustic device, which sounds in the following cases:

• at the end of the cycle

• in the event of operating problems.

By pressing the 3 and 4 buttons simultaneously for about 6 seconds, the acoustic signal is

deactivated (except for the events of operating problems). By pressing these 2 buttons

again, the acoustic signal is reactivated.

Child safety lock

This device permits you to leave the appliance unsupervised and not to worry that children

might be injured by or cause damage to the appliance.

This function remains able also when the washing machine is not working.

There are two different ways to set this option:

•

Before pressing button 8 : it will be impossible to start the machine.

•

after pressing button 8 : it will be impossible to change any other programme or option.

To enable or disable this option press simultaneously for about 6 seconds buttons 4 and

5 until the symbol 7.3 appears or disappears on or from the display.

8

DAILY USE

Load the laundry

1. Open the door by carefully pulling the

door handle outwards. Place the laundry

in the drum, one item at a time, shaking

them out as much as possible.

2. Close firmly the door. You must hear a

click during closing.

WARNING!

Do not embed the laundry between the door

and the rubber joint.

Measure out the detergent and the fabric softener

Your new appliance was designed to reduce water, energy and detergent consumption.

1. Pull out the dispenser drawer until it

stops. Measure out the amount of deter-

gent required, pour it into the main wash

compartment

and, if you wish to carry

out the prewash phase, pour the deter-

gent into the compartment marked

.

If you wish to perform the stain function,

pour the stain remover into the compart-

ment marked with an arrow

.

Daily use

9

2. If required, pour fabric softener into the

compartment marked

(the amount

used must not exceed the MAX mark in

the drawer).

Close the drawer gently.

Select the required programme by means of programme selector dial (1)

You can choose the right programme for any type of laundry following the descriptions on

the washing programme tables (see «Washing Programmes»).

Turn the programme selector dial to the required programme. The programme selector

determines the type of washing cycle (e.g. water level, drum movement, number of rinses)

and the washing temperature according to the type of laundry.

The pilot light of button 8 starts blinking.

The selector dial can be turned either clockwise or anticlockwise. Position

to Reset

programme/ Switching OFF of the machine.

At the end of the programme the selector dial must be turned to position

, to

switch the machine off.

If you turn the programme selector dial to another programme when the machine is work-

ing, the yellow pilot light of button 8 will blink 3 times and the message Err is displayed

on the display to indicate a wrong selection. The machine will not perform the new selected

programme.

Select the desired TEMPERATURE (Button 2)

When selecting a programme, the appliance automatically proposes the default tempera-

ture provided for that programme.

Press this button repeatedly to increase or decrease the temperature, if you want your

laundry to be washed at a temperature different from the one proposed by the washing

machine.

By selecting position

(Cold) the machine will wash with cold water. To be used for

extremely delicate items, such as curtains.

For the maximum and the minimum available wash water temperature, see «Washing pro-

grammes».

10

Daily use

Select the SPIN speed or the RINSE HOLD option (Button 3)

When the required programme has been selected, your appliance automatically proposes

the maximum spin speed provided for that programme.

Press this button repeatedly to change the spin speed, if you want your laundry to be spun

at a speed different from the one proposed by the washing machine.

The relevant light will light up.

RINSE HOLD : by selecting this option the water of the last rinse is not emptied out to

prevent the fabrics from creasing. When the programme has finished the display shows a

blinking

, the pilot light 10.2 goes on, the pilot light of button 8 is off and the door is

blocked to indicate that the water must be emptied out.

To empty the water out please read chapter «At the end of the programme».

Programme option buttons

Depending on the programme, different functions can be combined. These must be selected

after choosing the desired programme and before pressing the button 8 .

When these buttons are pressed, the corresponding pilot lights come on. When they are

pressed again, the pilot lights go out.

If an incorrect option is selected, the in yellow pilot light of the button 8 blinks for 3 times

and the Err message appears on the display for some seconds.

For the compatibility among the washing programmes and the options see chapter «Wash-

ing Programmes».

Select the STAIN option (Button 4)

Select this option to treat heavily soiled or stained laundry with stain remover (extended

main wash with time optimized stain action phase). The relevant light will light up.

This option is not available with a temperature lower than 40°C.

If you wish to perform a programme with the stain option, pour stain remover into stain

compartment

marked with an arrow.

SENSITIVE option (Button 5)

By selecting this option the washing intensity will be reduced. The machine adds one rinse

in the programmes for COTTONS , 40-60 MIX , SYNTHETICS and ECONOMY . The relevant

symbol will appear on the display.

This option cannot be selected together with EXTRA RINSE option.

This option is recommended for non fast coloured items and for frequently washed items.

Select the TIME SAVING option (Button 6)

This option allows you to modify the washing time, automatically proposed by the appli-

ance.

DAILY : by pressing button 6 once, the relative pilot light comes on and the washing duration

will be reduced to wash daily soiled laundry.

SUPER QUICK : by pressing button 6 twice, the relative pilot light remains lit, the washing

duration will be reduced to wash lightly soiled laundry or items that have been used or

worn for a short time. On the display will be visualized the decreased washing time.

Daily use

11

Select the START/PAUSE (Button 8)

To start the selected programme, press the button 8 , the corresponding red pilot light stops

blinking.

The pilot light 10.1 is on to indicate that the appliance starts operating.

The pilot light 10.2 is on to indicate the door is locked.

To interrupt a programme which is running, press the button 8 : the corresponding red

pilot light starts blinking.

To restart the programme from the point at which it was interrupted, press the button 8

again. If you have chosen a delayed start with button 9 , the machine will begin the count-

down. If an incorrect option is selected, the yellow pilot light of the button 8 blinks for 3

times the message Err is displayed for about 2 seconds.

Select the DELAY START (Button 9)

Before you start the programme , if you wish to delay the start, press the button re-

peatedly, to select the desired delay.

The selected delay time value (up to 20 hours) will appear on the display for about 3 seconds,

then the duration of the programme will appear again.

You must select this option after you have set the programme and before you press the

button 8 .

The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by

1 hour up to a maximum of 20 hours by means of this button.

If you wish to add laundry in the machine during the delay time you will press button 8 to

put the machine in pause. Add the laundry, close the door and press button 8 again.

Selecting the delayed start.

• Select the programme and the required options.

• Select the delay start.

•

Press button 8 : the appliance starts its hourly countdown. The programme will start

after the selected delay has expired.

Cancelling the delayed start

•

Set the washing machine to PAUSE by pressing the button 8 ;

•

Press button 9 once until the symbol

’ is displayed;

•

Press the button 8 again to start the programme.

• The selected delay can be changed only after selecting the washing programme again.

• The door will be locked throughout the delay time. If you need to open the door, you

must first set the washing machine to PAUSE by pressing the button 8 . After you have

closed the door, press the button 8 again.

The button 9 can not be selected with DRAIN programme.

Select an additional rinse ( EXTRA RINSE )

This appliance is designed for saving water. However, for people with a very delicate skin

(allergic to detergents) it may be necessary to rinse the laundry using an extra quantity of

water.

Press simultaneously buttons 2 and 3 for some seconds: the pilot light 10.3 comes on. This

function stays permanently on. To remove it press the same buttons again until the pilot

light 10.3 goes off.

12

Daily use

Altering an option or a running programme

It is possible to change any option before the programme carries it out. Before you make

any change, you must pause the washing machine by pressing the button 8 .

Changing a running programme is possible only by resetting it . Turn the programme

selector dial to

and then to the new programme position. Start the new programme by

pressing the 8 button again. The washing water in the tub will not emptied out.

Interrupting a programme

Press the button 8 to interrupt a programme which is running, the corresponding light

starts blinking. Press the button again to restart the programme.

Cancelling a programme

Turn the selector dial to to cancel a programme which is running. Now you can select

a new programme.

Opening the door after the programme has started

First set the machine to pause by pressing the button 8 . If the pilot light 10.2 goes off,

after some minutes the door can be opened.

If the door remains locked - the pilot light 10.2 is on, this means that the machine is already

heating, that the water level is above the bottom edge of the door. In this case the door

can not be opened. If you cannot open the door but you need to open it you have to switch

the machine off by turning the selector dial to

. After some minutes the door can be

opened (pay attention to the water level and temperature !) .

After closing the door, it is necessary to select the programme and options again and to

press button 8 .

At the end of the programme

The machine stops automatically, the pilot light of button 8 , the pilot lights 10.1 and

10.2 go off and a blinking

will appear on the display.

If a programme or an option that ends with water still in the tub has been selected, the

pilot light 10.2 illuminates, a blinking

will appear on the display, the pilot light of button

8 goes off and the door remains locked to indicate that the water must be emptied out

before opening the door.

Follow the below instructions to empty out the water:

• Turn the programme selector dial to

• Select the DRAIN or SPIN programme

• Reduce the spin speed if needed, by means of the relevant button

•

Press button 8

• When the programme has finished the display shows a blinking

. The pilot light

10.2 goes off and the door can be opened.

Turn the programme selector dial to

to switch the machine off. Remove the laundry

from the drum and carefully check that the drum is empty. If you do not intend to carry

out another wash, close the water tap. Leave the door open to prevent the formation of

mildew and unpleasant smells.

Daily use

13

Stand by : once the programme has finished after a few minutes the energy saving system

will be enabled. The brightness of the display is reduced. By pressing any button the ap-

pliance will come out of the energy saving status.

HELPFUL HINTS AND TIPS

Sorting out the laundry

Follow the wash code symbols on each garment label and the manufacturer’s washing

instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens.

Before loading the laundry

Never wash whites and coloureds together. Whites may lose their «whiteness» in the wash.

New coloured items may run in the first wash; they should therefore be washed separately

the first time.

Button up pillowcases, close zip fasteners, hooks and poppers. Tie any belts or long tapes.

Remove persistent stains before washing.

Rub particularly soiled areas with a special detergent or detergent paste.

Treat curtains with special care. Remove hooks or tie them up in a bag or net.

Removing stains

Stubborn stains may not be removed by just water and detergent. It is therefore advisable

to treat them prior to washing.

Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a

special detergent then rub in the soap and water.

Oil based paint: moisten with benzine stain remover, lay the garment on a soft cloth and

dab the stain; treat several times.

Dried grease stains: moisten with turpentine, lay the garment on a soft surface and dab

the stain with the fingertips and a cotton cloth.

Rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be careful

with rust stains which are not recent since the cellulose structure will already have been

damaged and the fabric tends to hole.

Mould stains: treat with bleach, rinse well (whites and fast coloureds only).

Grass: soap lightly and treat with bleach (whites and fast coloureds only).

Ball point pen and glue: moisten with acetone

1)

, lay the garment on a soft cloth and dab

the stain.

Lipstick: moisten with acetone as above, then treat stains with methylated spirits. Treat

any residual marks with bleach.

Red wine: soak in water and detergent, rinse and treat with acetic or citric acid, then rinse.

Treat any residual marks with bleach.

Ink: depending on the type of ink, moisten the fabric first with acetone

1)

, then with acetic

acid; treat any residual marks on white fabrics with bleach and then rinse thoroughly.

Tar stains: first treat with stain remover, methylated spirits or benzine, then rub with

detergent paste.

1) do not use acetone on artificial silk

14

Detergents and additives

Good washing results also depend on the choice of detergent and use of the correct quan-

tities to avoid waste and protect the environment.

Although biodegradable, detergents contain substances which, in large quantities, can up-

set the delicate balance of nature.

The choice of detergent will depend on the type of fabric (delicates, woollens, cottons, etc.),

the colour, washing temperature and degree of soiling.

All commonly available washing machine detergents may be used in this appliance:

• powder detergents for all types of fabric

• powder detergents for delicate fabrics (60°C max) and woollens

• liquid detergents, preferably for low temperature wash programmes (60°C max) for all

types of fabric, or special for woollens only.

The detergent and any additives must be placed in the appropriate compartments of the

dispenser drawer before starting the wash programme.

If using liquid detergents, a programme without prewash must be selected.

Your appliance incorporates a recirculation system which allows an optimal use of the

concentrated detergent.

Follow the product manufacturer’s recommendations on quantities to use and do not

exceed the «MAX» mark in the detergent dispenser drawer .

Quantity of detergent to be used

The type and quantity of detergent will depend on the type of fabric, load size, degree of

soiling and hardness of the water used.

Follow the product manufacturers’ instructions on quantities to use.

Use less detergent if:

• you are washing a small load

• the laundry is lightly soiled

• large amounts of foam form during washing.

Degrees of water hardness

Water hardness is classified in so-called “degrees” of hardness. Information on hardness of

the water in your area can be obtained from the relevant water supply company, or from

your local authority. If the water hardness degree is medium or high we suggest you to

add a water softener following always the manufacturer’s instructions. When the degree

of hardness is soft, readjust the quantity of the detergent.

Helpful hints and tips

15

WASHING PROGRAMMES

Programme

Maximum and Minimum Temperature

Cycle Description

Maximum Fabrics Load

Type of Laundry

Options

Detergent

Compartment

COTTONS/LINEN

95°- Cold

Main wash - Rinses - Long spin

Max. load 7 kg - Reduced load 3,5 kg

For white and coloured cotton (normally soiled

items).

SPIN , RINSE HOLD ,

STAIN

1)

, SENSITIVE ,

TIME SAVING

2)

, EX-

TRA RINSE

COTTONS WITH PREWASH

95°- Cold

Prewash - Main wash - Rinses - Long spin

Max. load 7 kg - Reduced load 3,5 kg

For white or coloured cottons with prewash phase

(heavily soiled items).

SPIN , RINSE HOLD ,

STAIN

1)

, SENSITIVE ,

TIME SAVING

2)

, EX-

TRA RINSE

3)

40 - 60 MIX

40°

Main wash - Rinses - Long spin

Max. load 7 kg

White and coloured cotton This programme can be

used for laundry, which should be washed at 40°C or

60°C separately. The maximum load capacity can be

put into the drum in order to save energy and water.

The same good washing result will be obtained as for

normal programme at 60°C.

SPIN , RINSE HOLD ,

STAIN , SENSITIVE ,

EXTRA RINSE

JEANS

60°- Cold

Main wash - Rinses - Long spin

Max. load 3,5 kg

Special programme for jeans, denim items. The Extra

Rinse option will be activated automatically.

SPIN , RINSE HOLD

SYNTHETICS

60°- Cold

Main wash - Rinses - Short spin

Max. load 3,5 kg - Reduced load 2 kg

Synthetic or mixed fabrics: underwear, coloured

garments, non-shrink shirts, blouses.

SPIN , RINSE HOLD ,

STAIN

1)

, SENSITIVE ,

TIME SAVING

2)

, EX-

TRA RINSE

SYNTHETICS WITH PREWASH

60°- Cold

Prewash - Main wash - Rinses - Short spin

Max. load 3,5 kg - Red. load 2 kg

Synthetic or mixed fabrics with prewash phase:

heavily soiled items. underwear, coloured garments,

non-shrink shirts, blouses.

SPIN , RINSE HOLD ,

STAIN

1)

, SENSITIVE ,

TIME SAVING

2)

, EX-

TRA RINSE

3)

16

Washing programmes

Programme

Maximum and Minimum Temperature

Cycle Description

Maximum Fabrics Load

Type of Laundry

Options

Detergent

Compartment

EASY IRON

60°- Cold

Main wash - Rinses - Short spin

Max. load 1 kg

Synthetic fabrics to be gentle washed and spun.

Selecting this programme the laundry is gently wash-

ed and spun to avoid any creasing. In this way ironing

is easier. Furthermore the machine will perform ad-

ditional rinses.

SPIN , RINSE HOLD ,

EXTRA RINSE

DELICATES

40°- Cold

Main wash - Rinses - Short spin

Max. load 3,5 kg- Reduced load 2 kg

Delicate fabrics: acrylics, viscose, polyester.

SPIN , RINSE HOLD ,

STAIN

1)

, TIME SAV-

ING

2)

, EXTRA RINSE

WOOL PLUS /HANDWASH / SILK

40°-Cold

Main wash - Rinses - Short spin

Wool/Handwash: Max. load 2 kg; Silk: Max. load 1 kg

Washing programme for machine washable wool as

well as for hand washable woollens and delicate fab-

rics. Note : A single or bulky item may cause imbal-

ance. If the appliance doesn’t perform the final spin

phase, add more items, redistribute the load manually

and then select the spinning programme.

SPIN , RINSE HOLD

DELICATE RINSES

Rinses - Short spin

Max. load 7 kg

With this programme it is possible to rinse and spin

cotton garments which have been washed by hand.

The machine performs some rinses, followed by a final

spin. The spin speed can be reduced by pressing the

relevant button.

SPIN , RINSE HOLD ,

EXTRA RINSE

DRAIN

Draining of water

For emptying out the water of the last rinse in pro-

grammes with the RINSE HOLD option selected.

Washing programmes

17

Programme

Maximum and Minimum Temperature

Cycle Description

Maximum Fabrics Load

Type of Laundry

Options

Detergent

Compartment

SPIN

Drain and long spin

Max. load 7 kg

Separate spin for hand washed cotton garments and

after programmes with the RINSE HOLD option se-

lected. Before selecting this programme the selector

dial must be turned to

. You can choose the spin

speed by pressing the relevant button to adapt it to

the fabrics to be spun.

SPIN

FRESH UP

30°

Main wash - Rinses - Short spin

Max. load 3 kg

This programme may be used for quick wash for sport

items, or cotton and synthetic items lightly soiled or

worn once.

SPIN

ECONOMY

60°

Main wash - Rinses - Long spin

Max. load 7 kg

White and fast coloured cotton .

This programme can be selected for slightly or nor-

mally soiled cotton items. The temperature will de-

crease and the washing time will be extended. This

allows to obtain a good washing efficiency so saving

energy.

SPIN , RINSE HOLD ,

STAIN , SENSITIVE ,

EXTRA RINSE

/OFF

For cancelling the programme which is running or to

switch the machine off .

1) STAIN option can be selected only at the temperature of 40°C or higher.

2) If you select the SUPER QUICK option by pressing button 6 , we recommend that you reduce the maximum

load as indicated. Full loading is possible however with somewhat reduced cleaning results.

3) If using liquid detergents, a programme without PREWASH must be selected.

CARE AND CLEANING

You must DISCONNECT the appliance from the electricity supply, before you can carry out

any cleaning or maintenance work.

Descaling

The water we use normally contains lime. It is a good idea to periodically use a water

softening powder in the machine. Do this separately from any laundry washing, and ac-

18

Care and cleaning

cording to the softening powder manufacturer's instructions. This will help to prevent the

formation of lime deposits.

After each wash

Leave the door open for a while. This helps to prevent mould and stagnant smells forming

inside the appliance. Keeping the door open after a wash will also help to preserve the door

seal.

Maintenance wash

With the use of low temperature washes it is possible to get a build up of residues inside

the drum.

We recommend that a maintenance wash be performed on a regular basis.

To run a maintenance wash:

• The drum should be empty of laundry.

• Select the hottest cotton wash programme.

• Use a normal measure of detergent, must be a powder with biological properties.

External cleaning

Clean the exterior cabinet of the appliance with soap and water only, and then dry thor-

oughly.

Do not use methylated spirits, solvents or similar products to clean the cabinet.

Detergent dispenser drawer

The detergent dispenser drawer should be cleaned regularly.

1. Remove the detergent dispenser drawer by pulling it firmly.

2. Remove the conditioner insert from the

middle compartment.

3. Clean all parts with water.

4. Put the conditioner insert in as far as it

will go, so that it is firmly in place.

5. Clean all parts of the washing machine,

especially the nozzles in the top of the

washing-in chamber, with a brush.

6. Insert the detergent dispenser drawer in

the guide rails and push it in.

Washing drum

Rust deposits in the drum may occur due to rusting foreign bodies in the washing or tap

water containing iron.

Care and cleaning

19

Do not clean the drum with acidic descaling agents, scouring agents containing chlorine

or iron or steel wool.

1. Remove any rust deposits on the drum with a cleaning agent for stainless steel.

2. Run a washing cycle without any washing to clean off any cleaning agent residues.

Programme: Short Cotton Programme at maximum temperature and add approx. 1/4

measuring cup of detergent.

Door seal

Check from time to time the door seal and objects

that could be trapped in the fold.

Drain pump

The pump should be inspected regularly and particularly if:

• the appliance does not empty and/or spin;

• the appliance makes an unusual noise during draining due to objects such as safety pins,

coins etc. blocking the pump;

• a problem with water draining is detected (see chapter “What to do if...” for more details).

WARNING!

Before opening the pump door, switch the appliance off remove the mains plug from the

socket.

Proceed as follows:

1. Unplug the appliance.

2. If necessary wait until the water has cooled down.

3. Open the pump door.

4. Pull flap forward to remove.

5. Place a container close to the pump to

collect any spillage.

20

Care and cleaning

Seite laden ...

Aeg-Electrolux L64857L Benutzerhandbuch

Aeg-Electrolux L64857L Benutzerhandbuch

in anderen Sprachen

Verwandte Papiere

Sonstige Unterlagen