Zanussi ZWHB6160P Benutzerhandbuch

EN

User manual 2

DE

Benutzerinformation 28

Washing Machine

Waschmaschine

ZWHB 6140 P

ZWHB 6160 P

Contents

Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2

Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3

Frost precaution _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4

Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ 5

Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5

Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6

Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6

Special accessories _ _ _ _ _ _ _ _ _ _ _ _ _ 11

First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11

Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11

Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ 18

Consumption values _ _ _ _ _ _ _ _ _ _ _ _ _ 21

Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ 21

What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 23

Subject to change without notice.

Safety information

Before the installation and use of the appliance, carefully read the

supplied instructions. The manufacturer is not responsible if an incor-

rect installation and use causes injuries and damages. Always keep

the instructions with the appliance for future reference.

Children and vulnerable people safety

Warning! Risk of suffocation, injury or permanent disability.

• Do not let persons, children included, with reduced physical sen-

sory, reduced mental functions or lack of experience and knowl-

edge use the appliance. They must have supervision or instruction

for the operation of the appliance by a person who is responsible

for their safety.

• Do not let children play with the appliance.

• Keep all packaging away from children.

• Keep all detergents away from children.

• Keep children and pets away from the appliance door when it is

open.

• If the appliance has a child safety device, we recommend you acti-

vate it.

General Safety

• Before maintenance, deactivate the appliance and disconnect the

mains plug from the mains socket.

• Do not change the specification of this appliance.

2

www.zanussi.com

• Obey the maximum load volume of 7 kg (refer to the “Programme

chart” chapter).

• If the supply cord is damaged, it must be replaced by the manu-

facturer, its service agent or similarly qualified persons in order to

avoid a hazard.

•The operating water pressure (minimum and maximum) must be

between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa)

• The ventilation openings in the base (if applicable) must not be ob-

structed by a carpet.

• The appliance is to be connected to the water mains using the

new supplied hose-sets. Old hose sets must not be reused.

Safety instructions

Installation

• Remove all the packaging and the transit

bolts.

• Keep the transit bolts. When you move the

appliance again you must block the drum.

• Do not install or use a damaged appliance.

• Do not install or use the appliance where the

temperature is less than 0 °C or where it is

exposed to the weather.

• Obey the installation instruction supplied with

the appliance.

• Make sure that the floor where you install the

appliance is flat, stable, heat resistant and

clean.

• Do not install the appliance where the appli-

ance door can not be fully opened.

• Always be careful when you move the appli-

ance because it is heavy. Always wear safety

gloves.

• Make sure that there is air circulation be-

tween the appliance and the floor.

• Adjust the feet to have the necessary space

between the appliance and the carpet.

Electrical connection

Warning! Risk of fire and electrical shock.

• The appliance must be earthed.

• Make sure that the electrical information on

the rating plate agrees with the power supply.

If not, contact an electrician.

• Always use a correctly installed shockproof

socket.

• Do not use multi-plug adapters and extension

cables.

• Make sure not to cause damage to the mains

plug and to the mains cable. Contact the

Service or an electrician to change a dam-

aged mains cable.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure

that there is access to the mains plug after

the installation.

• Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug.

• Do not touch the mains cable or the mains

plug with wet hands.

• This appliance complies with the E.E.C. Di-

rectives.

Water connection

• Make sure not to cause damage to the water

hoses.

• The appliance is to be connected to the wa-

ter mains using the new supplied hose-sets.

Old hose sets must not be reused.

3

www.zanussi.com

• Before you connect the appliance to new

pipes or pipes not used for a long time, let

the water flow until it is clean.

• The first time you use the appliance, make

sure that there is no leakage.

Use

Warning! Risk of injury, electrical shock,

fire, burns or damage to the appliance.

• Use this appliance in a household environ-

ment.

• Obey the safety instructions on the detergent

packaging.

• Do not put flammable products or items that

are wet with flammable products in, near or

on the appliance.

• Do not touch the glass of the door while a

programme operates. The glass can be hot.

• Make sure that you remove all metal objects

from the laundry.

• Do not put a container to collect possible wa-

ter leakage under the appliance. Contact the

Service to ensure which accessories can be

used.

Care and Cleaning

Warning! Risk of injury or damage to the

appliance.

• Do not use water spray and steam to clean

the appliance.

• Clean the appliance with a moist soft cloth.

Only use neutral detergents. Do not use

abrasive products, abrasive cleaning pads,

solvents or metal objects.

Disposal

Warning! Risk of injury or suffocation.

• Disconnect the appliance from the mains

supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent children

and pets to get closed in the appliance.

Service

• Contact the Service to repair the appliance.

We recommend only the use of original spare

parts.

Frost precaution

If the appliance is installed in a place where the

temperature could drop below 0°C, proceed as

follows to remove any water remaining inside

the appliance:

1. unplug the appliance;

2. turn off the water tap;

3. unscrew the water inlet hose from the tap;

4. unscrew the drain hose from the rear sup-

port and unhook it from sink or spigot;

5. place a bowl on the floor;

6. let the drain hose run along the floor, place

the external extremities of the drain and in-

let hoses in the bowl placed on the floor

and let water drain out completely;

7. screw the water inlet hose to the tap and

the drain hose to the rear of the appliance

again;

When you intend to start the appliance up

again, make sure that the room temperature is

above 0°C.

4

www.zanussi.com

Environment concerns

Recycle the materials with the symbol . Put

the packaging in applicable containers to

recycle it.

Help protect the environment and human health

and to recycle waste of electrical and electronic

appliances. Do not dispose appliances marked

with the symbol

with the household waste.

Return the product to your local recycling facility

or contact your municipal office.

Packaging materials

The materials marked with the symbol

are re-

cyclable.

>PE<=polyethylene

>PS<=polystyrene

>PP<=polypropylene

This means that they can be recycled by dis-

posing of them properly in appropriate collec-

tion containers.

Ecological hints

To save water, energy and to help protect the

environment, we recommend that you follow

these tips:

• Normally soiled laundry may be washed with-

out prewashing in order to save detergent,

water and time (the environment is protected

too!).

• The machine works more economically if it is

fully loaded.

• With adequate pre-treatment, stains and limi-

ted soiling can be removed; the laundry can

then be washed at a lower temperature.

• Measure out detergent according to the wa-

ter hardness, the degree of soiling and the

quantity of laundry being washed.

Product description

1 2 3

4

5

6

11

9

10

9

8

7

12

5

www.zanussi.com

1

Detergent dispenser drawer

2

Worktop

3

Control panel

4

Door opening handle

5

Rating plate (on the inner edge)

6

Front adjustable feet

7

Water drain hose

8

Drain hose support

9

Hose holders

10

Water inlet hose

11

Mains cable

12

Back feet

Child safety device

To activate this device, rotate the button (with-

out pressing it) inside the door clockwise until

the groove is horizontal. If necessary use a coin.

To disable this device and restore the possibil-

ity of closing the door, rotate the button anti-

clockwise until the groove is vertical.

Technical data

Dimensions Width

Height

Depth

Depth (Overall dimensions)

60 cm

85 cm

50 cm

54 cm

Electrical connection

Voltage - Overall power - Fuse

Information on the electrical connection is given on the rating plate, on

the inner edge of the appliance door.

Water supply pressure Minimum

Maximum

0,05 MPa

0,8 MPa

Maximum Load Cotton 7 kg

Spin Speed Maximum 1400 rpm (ZWHB6140P)

1600 rpm (ZWHB6160P)

Installation

Unpacking

Warning!

• Read carefully the "Safety information"

chapter before installing the appliance.

6

www.zanussi.com

x 3

x 2

x 1

B

A

C

Warning! Remove and keep all trans-

it devices so that they can be refitted if

the appliance ever has to be transported

again.

Necessary tools

10 mm

30 mm

• Remove the exter-

nal film. Use a cut-

ter, if necessary.

• Remove the cardboard top.

• Remove the polystyrene packaging materi-

als.

2

1

• Spread the front

piece on the floor

behind the appli-

ance and then lay

the appliance care-

fully rear side down

on it. Make sure

that no hoses are

crushed in the

process.

• Remove the polystyrene base from the bot-

tom.

• Return appliance to

it's upright position.

• Open the door and

remove the plastic

hose guide, the

bag containing the

instruction booklet

and the plastic plug

caps from the

drum.

• Remove the power supply cable and the

draining and inlet hose from the hose hold-

ers on the rear of the appliance.

7

www.zanussi.com

• Unscrew the three bolts and remove the

hose holders.

• Slide out the relevant plastic spacers.

Warning! Do

not remove the

drain hose from

the rear support.

Remove this hose

only if it is neces-

sary to drain the

water. Refer to

"Frost precaution"

and "What to do if".

• Plug the smaller upper hole and the two

large ones with the corresponding plastic

plug caps.

Positioning and levelling

x 4

Level the appliance by raising or lowering the

feet.

The appliance MUST be level and stable on a

flat hard floor. If necessary, check the setting

with a spirit level. Any necessary adjustment

can be made with a spanner.

8

www.zanussi.com

Accurate levelling prevents vibration, noise

and displacement of the appliance during op-

eration.

Repeat the levelling action, if the appliance is

not level and stable.

Warning! This appliance is free standing

only. Do not remove the worktop for any

reason.

Water inlet

Connect the hose to

a tap with a 3/4”

thread.

35°

45°

Loosen the ring nut to angle the hose to the

left or right depending on the position of your

water tap. Do not place the inlet hose

downwards. After positioning the inlet hose,

be sure to tighten the ring nut again to prevent

leaks.

Water drainage

Firstly form a hook in the end of the drain hose

using the plastic hose guide supplied with the

appliance .

The end of the drain hose can be positioned

in four ways:

• Hooked over the edge of a sink using

the plastic hose guide.

Tie the plastic hose guide to the tap with a

string to prevent that the drain hose unhooks

when the appliance is emptying.

• Onto a sink outlet spigot.

Push the drain hose onto the spigot and se-

cure with a clip, ensure a loop is formed in the

drain hose to prevent waste from the sink en-

tering the appliance.

If the outlet spigot has not been used before,

remove any blanking plug that may be in

place.

9

www.zanussi.com

• Directly into a drain pipe at a height of

not less than 60 cm and not more than 100

cm.

MAX 100cm

The end of the drain

hose must always be

ventilated, i.e. the in-

side diameter of the

drain pipe must be

larger than the out-

side diameter of the

drain hose. The drain

hose must not be

kinked.

• Directly to a built-in drain pipe in the

room wall.

The drain hose may be extended to a maxi-

mum of 4 metres. An additional drain hose

and joining piece is available from your Local

Centre.

Connections overview

~max.400 cm

min. 60 cm

max. 100 cm

0.5 bar (0.05 MPa)

8 bar (0.8 MPa)

min.

60 cm

max.

100 cm

Electrical connection

• The appliance must be earthed.

• Make sure that the electrical information on

the rating plate agree with your domestic

power supply.

• Always use a correctly installed shockproof

socket.

• Do not use multi-way plugs, connectors and

extension cables. There is a risk of fire.

• Do not replace or modify the mains cable

yourself. Contact the After Sales Service.

• Make sure that the mains plug and cable is

not squashed or damaged by the back of the

appliance.

• Make sure that the mains plug is accessible

after installation.

• Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug.

• This appliance complies with the E.E.C. Di-

rectives.

10

www.zanussi.com

Special accessories

Rubber feet kit (4055126249)

Available from your authorized dealer.

The rubber feet are particularly recommended

on floating, slippery and wooden floors.

Mount the rubber feet to prevent vibration,

noises and displacement of the appliance dur-

ing operation.

Read carefully the instructions supplied with the

kit.

First use

• Ensure that the electrical and water con-

nections comply with the installation in-

structions.

• Ensure that the drum is empty.

• Before the first wash, run a cotton cycle

at the highest temperature without any

laundry in the machine, to remove any

manufacturing residue from the drum

and tub. Pour 1/2 a measure of deter-

gent into the main wash compartment

and start the machine.

Daily use

Sort out the laundry

Follow the wash code symbols on each garment

label and the manufacturer’s washing instruc-

tions. Sort the laundry as follows: whites, col-

oureds, synthetics, delicates, woollens.

Before Loading The Laundry

Important! Make

sure that no metal ob-

jects are left in the

laundry (e.g. hair

clips, safety pins,

pins). Button up pil-

lowcases, close zip

fasteners, hooks and

poppers. Tie any belts

or long tapes. Re-

move any hooks (e.g

curtains).

• Never wash whites and coloureds together.

Whites may lose their «whiteness» in the

wash.

• New coloured items may run in the first wash;

they should therefore be washed separately

the first time.

• Rub particularly soiled areas with a special

detergent or detergent paste.

• Treat curtains with special care.

• Wash the socks and the gloves inside the

bag or a net.

Remove stubborn stains before washing:

Blood: treat fresh stains with cold water. For

dried stains, soak overnight in water with a spe-

cial detergent then rub in the soap and water.

Oil based paint: moisten with benzine stain

remover, lay the garment on a soft cloth and dab

the stain; treat several times.

Dried grease stains: moisten with turpentine,

lay the garment on a soft surface and dab the

stain with the fingertips and a cotton cloth.

Rust: oxalic acid dissolved in hot water or a rust

removing product used cold. Be careful with

rust stains which are not recent since the cellu-

lose structure will already have been damaged

and the fabric tends to hole.

Mould stains: treat with bleach, rinse well

(whites and fast coloureds only).

Grass: soap lightly and treat with bleach

(whites and fast coloureds only).

Ball point pen and glue: moisten with ace-

tone

1)

, lay the garment on a soft cloth and dab

the stain.

1) do not use acetone on artificial silk.

11

www.zanussi.com

Lipstick: moisten with acetone as above, then

treat stains with methylated spirits. Treat any re-

sidual marks with bleach.

Red wine: soak in water and detergent, rinse

and treat with acetic or citric acid, then rinse.

Treat any residual marks with bleach.

Ink: depending on the type of ink, moisten the

fabric first with acetone

1)

, then with acetic acid;

treat any residual marks on white fabrics with

bleach and then rinse thoroughly.

Tar stains: first treat with stain remover, methy-

lated spirits or benzine, then rub with detergent

paste.

Open the door by carefully pulling the

door handle outwards

Load the laundry

Place the laundry in

the drum, one item at

a time, shaking them

out as much as possi-

ble.

Maximum Loads

Recommended loads are indicated in the

«Washing Programmes».

General rules:

• Cotton, linen: drum full but not too tightly

packed;

• Synthetics: drum no more than half full;

• Delicate fabrics and woollens: drum no

more than one third full.

Close the door gently

Warning! Make

sure that any

fabrics were not trap-

ped when closing the

door.

Detergents and additives

Good washing results also depend on the

choice of detergent and use of the correct

quantities to avoid waste and protect the envi-

ronment.

Although biodegradable, detergents contain

substances which, in large quantities, can upset

the delicate balance of nature.

Caution! Use only detergents for washing

machines. Obey the instructions that you

find on the packaging. Use specific detergents

depending on the water temperature, the type

of tissue, the colour and the level of soil of your

laundry.

All commonly available washing machine deter-

gents may be used in this appliance:

• powder detergents for all types of fabric,

• powder detergents for delicate fabrics (40°C

max) and woollens,

• liquid detergents, preferably for low tempera-

ture wash programmes (60°C max) for all

types of fabric, or special for woollens only.

Quantity of detergent to be used

The type and quantity of detergent will depend

on the type of fabric, load size, degree of soiling

and hardness of the water used.

For the quantity of detergent, refer always to

what is written on the product packing.

Use less detergent if:

• you are washing a small load,

• the laundry is lightly soiled,

• large amounts of foam form during washing.

12

www.zanussi.com

Degrees of water hardness

Water hardness is classified in so-called “de-

grees” of hardness. Information on hardness of

the water in your area can be obtained from the

relevant water supply company, or from your lo-

cal authority.

If the water hardness degree is medium or high

we suggest you to add a water softener follow-

ing always the manufacturer’s instructions.

When the degree of hardness is soft, readjust

the quantity of the detergent.

Open the detergent dispenser drawer

Compartment for

powder or liquid de-

tergent used for main

wash.

Compart-

ment for liquid addi-

tives (fabric softener,

starch).

Warning! If you wish to carry out the

prewash, pour the detergent for prewash

phase among washing items into the drum.

Warning! Depending on the type

detergent you use (powder of liquid),

ensure that the flap, placed in the main wash

compartment, is in the desired position.

Flap for powder or liquid detergent

UP- Flap position if

using POWDER de-

tergent

DOWN - Flap posi-

tion if using LIQ-

UID detergent dur-

ing main wash

PUSH

R

EM

O

V

E

TO

C

LEA

N

PUSH

R

E

M

O

VE

TO

C

LEA

N

If the flap is not in the desired position:

• Remove the drawer. Push the drawer edge

outwards where indicated by the arrow

(PUSH) to facilitate drawer removal.

The flap is down and you wish to use

powder detergent:

• Rotate the flap up-

wards. Ensure to fit

the flap completely

in.

• Carefully put the

drawer back.

• Measure out the

detergent.

• Pour the powder

detergent into the

main wash com-

partment

.

The flap is up and you wish to use liquid

detergent:

• Rotate the flap

downwards.

• Carefully put the

drawer back.

• Measure out the detergent.

For the quantity of detergent, refer al-

ways to what is written on the product

packing and ensure that the detergent can be

poured in the drawer.

13

www.zanussi.com

• Pour the liquid detergent in the compart-

ment

without exceeding the limit indica-

ted in the flap. The detergent must be

placed in the appropriate compartments of

the dispenser drawer before starting the

wash programme.

Warning! Do not use the flap in "DOWN"

position with:

• Gelatinous detergent or thick detergent.

• Powder detergent.

• With programmes with prewash.

• Do not use liquid detergent if the washing

programme doesn't start immediately.

In all above listed cases, use the flap in

"UP" position .

Measure out the fabric softener

Pour fabric softener

or any additives into

the compartment

marked

(do not

exceed the «MAX»

mark in the drawer).

Any additives must be

placed in the appro-

priate compartments

of the dispenser

drawer just before

starting the wash pro-

gramme.

Close the detergent dispenser drawer

Set your washing programme

The control panel permits to select a washing programmes and different options.

When an option button is selected, the corresponding pilot light is on. Otherwise it is off.

For compatibility among washing programmes and options, see the "Washing Programme

Chart". If an incorrect option is selected, the integrated red pilot light of the button 5 flashes

3 times.

1

7

54

2

3

6

14

www.zanussi.com

1

Programme selector

dial

Dekens

Couette

Mini 30’

Jeans

Centrifugeren

Essorage

Pompen

Vidange

Spoelen

Rinçage

Fijne was

Délicats

Wol/Laine

Handwas

Lavage à la main

Mix

20°

Synthetica

Synthétiques

+Voorwas

+Prélavage

Katoen

Coton

Speciaal

Spécial

Antikreuk

Repassage facile

Turn the programme selector dial to the required pro-

gramme. The selector dial can be turned either clock-

wise or counter-clockwise. The green pilot light of the but-

ton Start starts flashing: the appliance is now switched on.

If you turn the programme selector dial to another pro-

gramme when the appliance is working, the red pilot light

of the button Start will flash 3 times to indicate a wrong selec-

tion. The appliance will not perform the new selected pro-

gramme.

•To switch the appliance off, turn the programme selector

dial to the position

.

•To cancel or change a running programme, switch the ap-

pliance off by turning the programme selector dial to the po-

sition

. Select the new programme by turning the selector

to the desired programme. Start the new programme by

pressing the button 5 again. The water in the tub will be not

emptied out.

2

Temperature button

90°

60°

40°

30°

Temp.

Push the temperature button to select the most suita-

ble temperature for washing your laundry .

: Cold wash.

3

Automatic Spin reduc-

tion and Rinse Hold

Centrifugeren

Essorage

By selecting a programme, the appliance proposes automati-

cally the maximum spin speed provided for that programme.

By selecting Automatic Spin reduction the spin speed is re-

duced to a half, but not less than 400 rpm. The relevant light (

) illuminates.

Rinse Hold

By selecting this function the water of the last rinse is not emp-

tied out to prevent the fabrics from creasing. Before opening

the door it will be necessary to empty out the water.

To empty out the water, please read the paragraph «At

the end of the programme».

15

www.zanussi.com

4

Super Quick

Supersnel

Rapide

By pressing this button the corresponding pilot light illumi-

nates.

Short cycle for lightly soiled items or for laundry which needs

only freshening up.

With this option, a reduced load of laundry is recommended:

• Cottons 3,5 kg

• Synthetics and delicates 2 kg

3

+

4

Extra Rinse

Supersnel

Rapide

This appliance is designed for saving water. However, for peo-

ple with very delicate skin (allergic to detergents) it may be

necessary to rinse the laundry using an extra quantity of water.

Press simultaneously the buttons 3 and 4 for some seconds:

the pilot light 7.2 comes on. This function stays permanently

on. To remove it press the same buttons again until the pilot

light 7.2 goes off.

5

Start/Pause

Start/Pauze

Départ/Pause

Start the programme by pressing the button 5

• To start the selected programme, press the button Start,

the corresponding green pilot light stops flashing. The pilot

light 7.1 illuminates to indicate that the appliance starts op-

erating and the door is locked. If you have chosen a delayed

start, the appliance will begin the countdown.

• To interrupt a programme which is running, press the but-

ton Start: the corresponding green pilot light starts flashing.

It is possible to change some options of a running pro-

gramme before the programme carries them out.

• To restart the programme from the point at which it was in-

terrupted, press the button Start.

• After the programme has started the door is locked. If, for

any reason, you need to open the door, set firstly the appli-

ance to PAUSE by pressing the button Start. After a few mi-

nutes it will be possible to open the door.

If the door remains locked, this means that the appliance is al-

ready heating or that the water level is too high. In any case, do

not try to force the door open!

If you cannot open the door but you need to open it you have

to switch the appliance off by turning the selector dial to

.

After a few minutes the door can be opened (pay attention to

the water level and temperature!). After closing the door, it

is necessary to select the programme and options again and to

press the button Start.

16

www.zanussi.com

6

Delay Start

Startuitstel

Départ différé

The start of the programme can be delayed by 9, 6 or 3 hours

by means of this button. The relevant light illuminates.

You must select this option after you have set the programme

and before you start the programme.

Select a delayed start:

• select the programme and the required options;

• select the delay start by pressing the button 6;

• press the button Start:

– the appliance starts its hourly countdown.

– The programme will start after the selected delay has ex-

pired.

Cancelling the delayed start after having started the

programme:

• set the appliance to PAUSE by pressing the button Start;

• press the button 6 once, the light relevant to the selected

delay goes off;

• press the button Start again to start the programme.

The DELAY START cannot be selected with the drain pro-

gramme.

Important! The selected delay can be changed only after se-

lecting the washing programme again. The door will be locked

throughout the delay time. If you need to open the door, you

must set the appliance to PAUSE (by pressing the button

Start) and then wait a few minutes. After you have closed the

door, press the button Start again.

.

7.1

7.2

7.3

Indicator pilot lights • When you start the programme by pressing the button

Start, the washing phase pilot light (7.1) illuminates. This

means that the appliance is operating.

• The additional rinses pilot light (7.2) illuminates when the ap-

pliance performs an extra rinse.

• When the programme has finished the end cycle pilot light

(7.3) comes on.

At the end of the programme

The appliance stops automatically. The pilot

light of the button 5 and the pilot light corre-

sponding to the just finished washing phase go

off. The light 7.3 illuminates.

If a programme or an option that ends with wa-

ter left in the tub has been selected and the

door remains locked to indicate that the water

must be emptied out before opening the door.

Follow the below instructions to empty out the

water:

•

Turn the programme selector dial to

.

• Select the draining or spinning programme.

• Reduce the spin speed if needed, by press-

ing the relevant button.

• Press the button 5.

At the end of the programme, the door can be

now opened. Turn the programme selector dial

to

to switch the appliance off.

17

www.zanussi.com

Remove the laundry from the drum and carefully

check that the drum is empty. If you do not in-

tend to carry out another wash, close the water

tap. Leave the door open to prevent the forma-

tion of mildew and unpleasant smells.

Warning! If there are children or pets in

the house, activate the child safety de-

vice in the inner side of the door frame (for

more details read " Child safety" in the chapter

"Product description").

Stand by: during programme setting up

and once the programme has finished, if

the programme selector dial and any button are

not touched, after a few minutes the energy sav-

ing system is enabled. The pilot lights go off.

The green pilot light of the button 5 flashes with

a low frequency. By pressing any button the ap-

pliance will come out of the energy saving sta-

tus.

Door seal

At the end of every

cycle, check from the

door seal and remove

objects that could be

trapped in the fold.

Washing programmes

Programme - Maximum and Minimum Temperature -

Cycle Description - Maximum Spin Speed - Maximum

Fabrics Load - Type of Laundry

Options

Detergent

Compartment

KATOEN/COTON

90°C- Cold

Main wash - Rinses - Maximum spin speed at 1400 rpm for

ZWHB6140P - 1600 rpm for ZWHB6160P

Max. load 7 kg - Reduced load 3,5 kg

White, coloured cotton and linen. Normally soiled items.

AUTOMATIC SPIN RE-

DUCTION

RINSE HOLD

SUPERSNEL/RAPIDE

1)

EXTRA RINSE

STARTUITSTEL/DÉ-

PART DIFFÉRE

+VOORWAS/+PRÉLAVAGE

90°C - Cold

Prewash - Main wash - Rinses - Maximum spin speed at 1400

rpm for ZWHB6140P - 1600 rpm for ZWHB6160P

Max. load 7 kg - Reduced load 3,5 kg

White, coloured cotton and linen. Heavy soiled items.

AUTOMATIC SPIN RE-

DUCTION

RINSE HOLD

SUPERSNEL/RAPIDE

1)

EXTRA RINSE

STARTUITSTEL/DÉ-

PART DIFFÉRE

ECO

2)

60°C and 40°C

Main wash - Rinses - Maximum spin speed at 1400 rpm for

ZWHB6140P - 1600 rpm for ZWHB6160P

Max. load 7 kg

White and coloured cotton. This programme can be selec-

ted for slightly or normally soiled cotton items. The temperature

will decrease and the washing time will be extended. This al-

lows to obtain a good washing efficiency by saving energy.

AUTOMATIC SPIN RE-

DUCTION

RINSE HOLD

EXTRA RINSE

STARTUITSTEL/DÉ-

PART DIFFÉRE

18

www.zanussi.com

Programme - Maximum and Minimum Temperature -

Cycle Description - Maximum Spin Speed - Maximum

Fabrics Load - Type of Laundry

Options

Detergent

Compartment

SYNTHETICA/SYNTHÉTIQUES

60°C - Cold

Main wash - Rinses - Maximum spin speed at 1200 rpm

Max. load 3,5 kg - Reduced load 1,5 kg

Synthetic or mixed fabrics: underwear, coloured garments,

non-shrink shirts, blouses . Normally soiled items.

AUTOMATIC SPIN RE-

DUCTION

RINSE HOLD

SUPERSNEL/RAPIDE

1)

EXTRA RINSE

STARTUITSTEL/DÉ-

PART DIFFÉRE

MIX 20°

20°

3)

Main wash - Rinses - Maximum spin speed at 1200 rpm

Max. load 3,5 kg

Highly energy efficient cold wash programme for lightly soiled

laundry. This programme requires a detergent which is active in

cold water.

AUTOMATIC SPIN RE-

DUCTION

RINSE HOLD

EXTRA RINSE

STARTUITSTEL/DÉ-

PART DIFFÉRE

FIJNE WAS/DÉLICATS

40°C- Cold

Main wash - Rinses - Maximum spin speed 700 rpm

Max. load kg 3,5 - Reduced load 1,5 kg

Delicate fabrics: acrylics, viscose, polyester . Normally soiled

items.

AUTOMATIC SPIN RE-

DUCTION

RINSE HOLD

SUPERSNEL/RAPIDE

1)

EXTRA RINSE

STARTUITSTEL/DÉ-

PART DIFFÉRE

WOL-LAINE/HANDWAS-LAVAGE À LA MAIN

40°C- Cold

Main wash - Rinses - Maximum spin speed at: 1200 rpm for

model ZWHB6140P; 1200 rpm for model ZWHB6160P

Max. load 2 kg

Machine washable wool, hand washable woollens and

delicate fabrics with «hand washing» care symbol. Note:

A single or bulky item may cause imbalance. If the appliance

doesn’t perform the final spin phase, add more items, redistrib-

ute the load manually and then select the spinning programme.

AUTOMATIC SPIN RE-

DUCTION

RINSE HOLD

STARTUITSTEL/DÉ-

PART DIFFÉRE

SPOELEN/RINÇAGE

Rinse - Short spin speed at 700 rpm. If a spin speed higher

than 700 rpm is selected, by pressing the relevant button, the

appliance performs a long spin. (Maximum spin speed: 1400

rpm for ZWHB6140P - 1600 rpm for ZWHB6160P)

Max. load 7 kg

To rinse and spin cotton garments which have been washed by

hand. Select the EXTRA RINSE option to intensify the rinsing

action. The appliance adds additional rinses.

AUTOMATIC SPIN RE-

DUCTION

RINSE HOLD

EXTRA RINSE

STARTUITSTEL/DÉ-

PART DIFFÉRE

POMPEN/VIDANGE

Draining of water

For emptying out the water left in the drum.

19

www.zanussi.com

Programme - Maximum and Minimum Temperature -

Cycle Description - Maximum Spin Speed - Maximum

Fabrics Load - Type of Laundry

Options

Detergent

Compartment

CENTRIFUGEREN/ESSORAGE

Drain and long spin at maximum spin speed: 1400 rpm for

ZWHB6140P - 1600 rpm for ZWHB6160P

Max. load 7 kg

Separate spin for hand washed garments. You can reduce the

spin speed by pressing the relevant button to adapt it to the

fabrics to be spun.

If a lower speed is selected, by pressing the relevant button,

the appliance performs a short spin.

AUTOMATIC SPIN RE-

DUCTION

STARTUITSTEL/DÉ-

PART DIFFÉRE

ANTIKREUK/REPASSAGE FACILE

60°C- Cold

Main wash - Rinses - Maximum spin speed at 900 rpm

In order to obtain the best anti-creasing result, reduce the load

of synthetic items. (Recommended load 1 kg)

Synthetic or mixed fabrics. Gentle wash and spin to avoid

any creasing. The appliance performs additional rinses.

AUTOMATIC SPIN RE-

DUCTION

RINSE HOLD

EXTRA RINSE

STARTUITSTEL/DÉ-

PART DIFFÉRE

DEKENS/COUETTE

30°C

Main wash - Rinses - Maximum spin speed at 700 rpm

Special programme for a single synthetic blanket, duvet, bed-

spread and so on. The Extra Rinse option is activated automat-

ically.

AUTOMATIC SPIN RE-

DUCTION

STARTUITSTEL/DÉ-

PART DIFFÉRE

MINI 30’

30°C

Main wash - Rinses - Maximum spin speed at 700 rpm

Max. load 3 kg

Synthetics and delicates. Lightly soiled items or which only

needs freshening up.

AUTOMATIC SPIN RE-

DUCTION

STARTUITSTEL/DÉ-

PART DIFFÉRE

JEANS

60°C- Cold

Main wash - Rinses - Maximum spin speed at 1200 rpm

Max. load 3 kg

Trousers, shirts or jackets in denim and jersey realized with hi-

tech materials. The Extra Rinse option is activated automatical-

ly.

AUTOMATIC SPIN RE-

DUCTION

RINSE HOLD

STARTUITSTEL/DÉ-

PART DIFFÉRE

1) If you select the SUPERSNEL/RAPIDE option by pressing button 4, we recommend that you reduce the

maximum load as indicated. Full loading is possible however with somewhat reduced cleaning results.

2) Standard programmes for the Energy Label consumption values.

According to regulation 1061/2010, these programmes are respectively the «Standard 60 °C cotton

programme» and the «Standard 40 °C cotton programme». They are the most efficient programmes in terms of

combined energy and water consumptions for washing normally soiled cotton laundry.

The water temperature of the washing phase may differ from the temperature declared for the selected

programme.

3) The appliance performs the short heating phase if the water temperature is below 20 °C. The appliance

shows the temperature setting as “Cold”.

20

www.zanussi.com

Seite wird geladen ...

Zanussi ZWHB6160P Benutzerhandbuch

Dieses Handbuch eignet sich auch für

Zanussi ZWHB6160P Benutzerhandbuch

in anderen Sprachen

Verwandte Artikel