Parkside 302330 Translation Of The Original Instructions

CORDLESS LED WORK LIGHT PLLA 12-Li A1

AKKU-LED-ARBEITSLICHT

Originalbetriebsanleitung

CORDLESS LED WORK LIGHT

Translation of the original instructions

IAN 302330

Before reading, unfold the page containing the illustrations and familiarise yourself with all

functions of the device.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich

anschließend mit allen Funktionen des Gerätes vertraut.

GB / IE / NI Translation of the original instructions Page 4

DE / AT / CH Originalbetriebsanleitung Seite 18

9

1

2 1110

12

3

4

5

6

14

7

13

78

4

GB IE NI

Introduction

Congratulations on the pur-

chase of your new device.

With it, you have chosen

a high quality product. Du-

ring production, this equip-

ment has been checked for

quality and subjected to a

nal inspection. The functio-

nality of your equipment is

therefore guaranteed.

The operating

instructions constitute

Content

Introduction ..................4

Intended purpose ..........5

General description .......5

Extent of the delivery ......... 5

Functional description ........ 5

Overview......................... 5

Technical data ............... 5

Safety instructions .........6

Symbols and icons ............ 6

Safety notices for

battery-powered lamps ........ 7

Use and treatment of this

battery-powered tool ......... 7

Charging the battery ...10

Inserting/removing

the battery ..................... 11

Recharging the battery .... 11

Used batteries ................ 12

Checking the battery

charge level ................... 12 Translation of the original

EC declaration of confor-

mity ............................ 35

Operation ...................12

Switching ON and OFF ... 12

Working instructions ...12

Hanger .......................... 12

Magnet ......................... 13

Swivelling the battery-

powered LED work light ... 13

Snap fastening ............... 13

Tripod mount .................. 13

Maintenance ...............13

Cleaning .....................13

Storage .......................14

Disposal and protection

of the environment......14

Accessories .................14

Guarantee ..................15

Repair Service ............. 17

Service-Center ............. 17

Importer .....................17

part of this product. They

contain important informa-

tion on safety, use and

disposal. Before using the

product, familiarise yourself

with all of the operating

and safety instructions.

Use the product only as

described and for the

applications specied. Keep

this manual safely and in the

event that the product is

passed on, hand over all

documents to the third party.

5

GB IE NI

Intended purpose

This vibration-proof batte-

ry-powered LED work light

is ideal for illuminating

dry, poorly lit interiors, for

example garages, cellars

or lofts.

The battery-powered LED

work light is not suitable for

lighting household rooms.

This battery-powered LED

work light is not intended

for commercial use.

General

description

The illustrations

can be found on

the fold-out page..

Extent of the delivery

Carefully unpack the

appliance and check that

it is complete. Dispose of

the packaging material

correctly.

- Cordless LED Work Light

- Rechargeable battery

- Charger

- Instruction Manual

Functional description

Refer to the following

descriptions for a functional

description of the controls.

Overview

1 Rechargeable battery

2 Battery release button

3 Appliance housing

4 Battery charge level

indicator

5 Base

6 Snap fastening

7 Hanger

8 On/off switch

9 LED lamp

10 Mains cable

11 Charger

12 Charger charge level

indicator

13 Magnet

14 1/4” inner thread

Technical data

Cordless LED

Work Light ... PLLA 12-Li A1

Nominal voltage U 12 V

Rated output Pmax .....5 W

Number of lamps (LED) . 10

Light output............ 350 lm

Protection class ..........III

III

Protection category ... IP20

Battery (Li-Ion) PAP 12-Li A1

Number of battery cells... 3

Nominal voltage ....12 V

Capacity ................2,0 Ah

Charging time .approx. 1 h

6

GB IE NI

Recharger ......PLG 12-Li A1

Nominal

consumption ............ 40 W

Uptake voltage/

Input ... 220-240 V~, 50 Hz

Voltage output/

Output .........12 V 2,4 A

Protection class .......... II

Protection category ... IPX0

Safety instructions

Symbols and icons

Symbols on the appliance:

Not to be used by

persons tted with

heart pacemakers or

implanted debrillators

Electrical appliances

must not be disposed

of with the domestic

waste.

III

Protection class

Direct voltage

Symbols on the battery:

Carefully read these

operating instruc-

tions.

Do not

dispose

of

batteries in household

waste, re or water.

Do not subject the

battery to strong

sunlight over long

periods and do not leave it

on a heater (max. 45°C).

Store the

battery in

charged condition

The battery

requires an

ambient tempera-

ture of +10°C to +40°C.

The battery should

never come into

contact with water.

Take batteries to an

old battery collection

point where they will

be recycled in an environ-

mentally friendly manner.

Symbols on the recharger:

Warning!

Carefully read these

operating instruc-

tions.

The recharger is for

indoor use only.

130°C

Miniature fuse

Protection class II

(double insulated)

T2A

7

GB IE NI

Electrical appliances

must not be disposed

of with the domestic

waste.

LED display while charging.

Symbols in the manual

Warning symbols

with information on

damage and injury

prevention.

Hazard symbol with

information on the

prevention of perso-

nal injury caused by

electric shock.

Instruction symbols

with information on

preventing damage

Help symbols with

information on impro-

ving tool handling.

~ Alternating voltage

Safety notices for

battery-powered lamps

• Do not cover the

battery-powered

LED work light when

in use. The battery-po-

wered LED work light

becomes hot during use

and can cause re.

• Do not look into the

light beam. Do not aim

the light beam at people

or animals.

• Do not allow chil-

dren to use the

battery-powered LED

work light. They could

inadvertently blind other

people or themselves.

• Keep the battery-po-

wered LED work light

away from magnet-

ically sensitive devices

and magnetic data

storage media. Due to

the magnet, there could be

irreversible data loss.

• Check that the batte-

ry powered LED work

light’s mounting is

solid. There is a risk of in-

jury if the battery-powered

LED work light falls down.

• The light source in this

lamp is not replacea-

ble; if the light source has

reached the end of its life,

then the whole lamp must

be replaced.

Use and treatment

of this battery-

powered tool

• Only recharge the

battery using char-

gers recommended

8

GB IE NI

by the manufacturer.

If a charger that has

been designed for

a particular type of

battery is used to

charge other batte-

ries, there is a risk

of re.

• Only use the battery

that is intended in

an electric tool. The

use of other batteries

may create a re

hazard and lead to

injury.

• When not in use,

keep batteries away

from paper clips,

coins, keys, nails,

screws or other

small metal objects

that could cause the

contacts to be brid-

ged. A short circuit

between battery

contacts can result in

burns or a re.

• When misused, uid

may leak from the

battery. Avoid any

contact with it. On

accidental contact,

wash in running

water. If the uid

comes into contact

with the eyes, seek

medical assistance

also. Leaking battery

uid can cause skin

irritation or burns.

Service

• Have your power

tool serviced by

a qualied repair

person using only

identical replace-

ment parts. This will

ensure that the safety

of the power tool is

maintained.

Special safety di-

rections for batte-

ry-operated tools

• Ensure that the de-

vice is switched off

before inserting the

battery. Inserting a

battery into a power tool

that is switched on may

result in accidents.

• bRecharge the bat-

teries indoors only

because the battery

charger is designed

for indoor use only.

• To reduce the elec-

tric shock hazard,

unplug the battery

charger from the

mains before clean-

ing the charger.

• Do not subject the

battery to strong

sunlight over long

periods and do not

leave it on a heater.

Heat damages the bat-

9

GB IE NI

tery and there is a risk of

explosion.

• Allow a hot battery to

cool before charging.

• Do not open up the

battery and avoid

mechanical damage

to the battery. Risk of

short circuit and fumes

may be emitted that irri-

tate the respiratory tract.

Ensure fresh air and seek

medical assistance in the

event of discomfort.

• Do not use non-re-

chargeable batteries!

Correct handling

of the battery

charger

• This appliance can

be used by children

aged from 8 years

and above and per-

sons with reduced

physical, sensory or

mental capabilities

or lack of experien-

ce and knowledge

if they have been

given supervision

or instruction con-

cerning use of the

appliance in a safe

way and understand

the hazards invol-

ved. Children shall

not play with the

appliance. Cleaning

and user maintenan-

ce shall not be made

by children without

supervision.

• Children should be

supervised to ensure

that they do not play

with the device.

• To charge the

battery, use only

the charger sup-

plied. Risk of re

and explosion. This

ensures that the safe-

ty of the device is

maintained.

• Before each use,

check the charg-

er, cable and plug

and have them

repaired by qual-

ied profession-

als and only with

original parts. Do

not use a defective

charger and do not

open it up yourself.

This ensures that the

safety of the device

is maintained.

• Connect the

charger only to

a socket with an

earth. Ensure that

the mains volt-

age matches the

specications on

the charger rat-

ing plate. Risk of

electric shock.

10

GB IE NI

• Keep the charger

clean and away

from wet and

rain. Do not use

the charger out-

doors. Dirt and

the entry of water

increase the risk of

electric shock.

• Operate the

charger only with

the appropriate

original batteries.

Charging other batter-

ies may result in inju-

ries and risk of re.

• Avoid mechan-

ical damage to

the charger. This

can result in internal

short circuits.

• Do not operate

the charger on a

combustible sur-

face (e.g. paper,

textiles). Risk of

re due to heating

during charging.

• If the power cable

for this equipment is

damaged, it must be

replaced by the man-

ufacturer, a customer

service agent of the

same or a similarly

qualied person in

order to prevent haz-

ards.

• The battery of the

appliance is not fully

charged at the time of

delivery. It therefore

needs to be fully re-

charged before you

use it for the rst time.

Slot the battery into

the base and plug the

battery charger into a

mains outlet.

• Remove the mains

plug when the battery

is fully charged and

disconnect the battery

from the charger.

• Do not use the

charger to charge

non-rechargeable

batteries.

Charging the

battery

Do not expose the

battery to extreme

conditions such

as heat or impact.

Risk of injury from

escaping electrolytic

solution! After eye/

skin contact, rinse the

affected areas with

water or a neutraliser

and consult a doctor.

Charge the battery in

a dry room only.

Prior to attaching the

charger, check that the

battery‘s outer surface

is clean and dry.

11

GB IE NI

There is a risk of

injury due to electric

shock.

Only use the original

charger from the

package to charge

the battery.

Make sure that the

mains supply voltage

matches the voltage

rating indicated on

the device‘s type plate

• Charge the battery befo-

re the rst time of use.

• If a fully recharged batte-

ry lasts for considerably

shorter operating times,

the battery is used up and

needs to be replaced.

Only use an OEM spare

battery available from our

Customer Service.

Inserting/

removing the

battery

1. To insert the battery (1),

place it on the guide

track and push it back

into the appliance. It will

audibly snap in.

2. To remove the battery

(1) from the appliance,

press the release buttons

(2) on the battery and

pull out the battery.

Recharging the

battery

Charging time is

approximately one

hour

1. Remove the battery (1)

from the appliance i

necessary.

2. Insert the battery (1) in

the charging compart-

ment of the battery

charger (11).

3. Plug the battery charger

(11) into a mains outlet.

4. When the battery is

fully recharged unplug

the battery charger (11)

from the mains.

5. Pull the battery (1) out of

the battery charger (11).

Overview of the LED indica-

tors on the charger (12):

Green LED lights up without

battery inserted:

Charger ready.

Green LED lights up:

Battery such alleged char-

ged.

Red LED lights up:

Battery charging.

12

GB IE NI

Used batteries

• If a fully recharged batte-

ry lasts for considerably

shorter operating times,

the battery is used up

and needs to be repla-

ced. Only use an OEM

battery pack replacement

available from our Custo-

mer Service.

• Always take heed of

the applicable safety

instructions as well as the

environmental protection

regulations and informa-

tion (see “Cleaning and

Maintenance”).

Checking the

battery charge

level

The battery’s (1) charge level is

indicated by the charge state

indicator (4).

• The LEDs indicate the

battery’s charge level,

when the device is in

operation.

red-yellow-green =>

Battery fully charged

red and yellow =>

Battery half charged

red =>

Battery needs to be charged

Operation

Switching ON

and OFF

1. To start, press the on/off

switch (8). The LED lamp

illuminates with maxi-

mum brightness.

2. To reduce the brightness,

hold down the on/off

switch (8) for about 3

seconds. To return to

maximum brightness,

press the on/off switch

(8) again for about 3

seconds.

3. To switch off, briey press

the on/off switch (8).

Working

instructions

Do not stare into the

battery-powered LED

work light when it is

switched on

Do not place the

battery-powered LED

work light on top of

the battery!

Hanger

Using the hanger (7), you

can attach the battery-po-

wered LED work light to an

object (e.g. onto a hook or

a nail).

13

GB IE NI

Magnet

Take care, because

sliding the batte-

ry-powered LED work

light can cause the

magnetic surface to

become scratched!

Using the magnets (13),

you can x the battery-po-

wered LED work lamp to

magnetic surfaces

The appliance housing

(3) with LED lamp can be

installed on the base (5) in

8 positions

Swivelling the

battery-powered

LED work light

The appliance housing

(3) with LED lamp can be

installed on the base (5) in

8 positions.

If you put the battery-po-

wered LED work light on a

non-magnetic surface, make

sure that it is in a stable

position. The 90º angle

shown in illustration

must not be exceeded.

Snap fastening

You can secure the batte-

ry-powered LED work light

using the snap fastening

(6) on the base (5). For

example, onto a belt loop,

a rope or similar

Tripod mount

Using the 1/4" inner thread

(14) you can screw the

battery-powered LED work

lamp onto a tripod (not

included in this package).

Maintenance

The battery-powered LED

work lamp is maintenance-

free

Cleaning

Before cleaning, dis-

connect the charger

from the mains

and switch off the

battery-powered LED

lamp.

• Clean the battery-powe-

red LED work lamp with

a soft, dry cloth to avoid

scratching the cover of

the LED lamp.

• Clean the charger and

the battery with a dry

cloth or with a paint

14

GB IE NI

brush. Do not use water

or metal objects.

• Do not use any abrasi-

ve cleaning agents or

solvents. These could

damage the device irre-

parably.

• Do not use water or me-

tallic aids. There is a risk

of a short circuit.

Storage

Avoid extreme cold or heat

during storage, so that the

battery does not lose per-

formance.

Before prolonged storage,

remove the battery from the

device and charge it fully.

Disposal and

protection of the

environment

Remove the battery from the

device and take the device,

battery, accessories and

packaging for environmen-

tally friendly recycling.

Machines do not

belong with domestic

waste.

Do not dispose of

batteries in hou-

sehold waste, re

(risk of explosion) or

water. Damaged bat-

teries may damage

the environment and

your health if toxic

fumes or liquids leak

out.

• Return the unit to a recy-

cling centre. The plastics

and metals in the unit can

be sorted and appropria-

tely recycled. Ask our

Service Centre for details.

• Dispose of batteries in

discharged condition.

We recommend covering

the pole with adhesive

tape to prevent a short

circuit. Do not open up

the battery.

• Dispose of batteries in

accordance with the local

regulations. Take batteries

to an old battery collec-

tion point where they will

be recycled in an environ-

mentally friendly manner.

For information about

this, ask your local waste

management company or

our service centre.

• Defective units returned to

us will be disposed of for

free.

Accessories

Accessories can be

obtained at

www.grizzly-service.eu

15

GB IE NI

If you do not have internet

access, please contact the

Service Centre via telepho-

ne (see “Service-Center”

Page 17).

Guarantee

Dear Customer,

This equipment is provided

with a 3-year guarantee

from the date of purchase.

The guarantee on the batte-

ry is 6 months from date of

purchase.

In case of defects, you have

statutory rights against the

seller of the product. These

statutory rights are not re-

stricted by our guarantee

presented below.

Terms of Guarantee

The term of the guarantee

begins on the date of pur-

chase. Please retain the

original receipt. This docu-

ment is required as proof of

purchase.

If a material or manufac-

turing defect occurs within

three years of the date of

purchase of this product,

we will repair or replace –

at our choice – the product

for you free of charge.

This guarantee requires the

defective equipment and

proof of purchase to be pre-

sented within the three-year

period with a brief written

description of what consti-

tutes the defect and when it

occurred.

If the defect is covered by

our guarantee, you will

receive either the repaired

product or a new product.

No new guarantee period

begins on repair or replace-

ment of the product.

Guarantee Period and

Statutory Claims for

Defects

The guarantee period is not

extended by the guarantee

service. This also applies

for replaced or repaired

parts. Any damages and

defects already present at

the time of purchase must

be reported immediately

after unpacking. Repairs

arising after expiry of

the guarantee period are

chargeable.

Guarantee Cover

The equipment has been

carefully produced in ac-

cordance with strict quality

guidelines and conscien-

tiously checked prior to

delivery.

The guarantee applies for

all material and manufac-

turing defects. This guar-

antee does not extend to

16

GB IE NI

cover product parts that are

subject to normal wear and

may therefore be consid-

ered as wearing parts or to

cover damage to breakable

parts.

This guarantee shall be

invalid if the product has

been damaged, used incor-

rectly or not maintained.

Precise adherence to all of

the instructions specied in

the operating manual is re-

quired for proper use of the

product. Intended uses and

actions against which the

operating manual advises

or warns must be categori-

cally avoided.

The product is designed

only for private and not

commercial use. The guar-

antee will be invalidated in

case of misuse or improper

handling, use of force, or

interventions not undertak-

en by our authorised ser-

vice branch.

Processing in Case of

Guarantee

To ensure efcient handling

of your query, please fol-

low the directions below:

• Please have the re-

ceipt and item number

(IAN302330) ready as

proof of purchase for all

enquiries.

• Please nd the item num-

ber on the rating plate.

• Should functional errors

or other defects occur,

please initially contact the

service department spec-

ied below by telephone

or by e-mail. You will

then receive further infor-

mation on the processing

of your complaint.

• After consultation with

our customer service, a

product recorded as de-

fective can be sent post-

age paid to the service

address communicated

to you, with the proof of

purchase (receipt) and

specication of what

constitutes the defect and

when it occurred. In or-

der to avoid acceptance

problems and additional

costs, please be sure

to use only the address

communicated to you.

Ensure that the consign-

ment is not sent carriage

forward or by bulky

goods, express or other

special freight. Please

send the equipment inc.

all accessories supplied

at the time of purchase

and ensure adequate,

safe transport packaging.

17

GB IE NI

Repair Service

For a charge, repairs

not covered by the

guarantee can be carried

out by our service branch,

which will be happy to is-

sue a cost estimate for you.

We can handle only equip-

ment that has been sent

with adequate packaging

and postage.

Attention: Please send your

equipment to our service

branch in clean condition

and with an indication of

the defect.

Equipment sent carriage

forward or by bulky goods,

express or other special

freight will not be accepted.

We will dispose of your

defective devices free of

charge when you send

them to us.

Service-Center

GB

Service

Great Britain

Tel.: 0800 404 7657

E-Mail:

[email protected]

IAN 302330

IE

NI

Service Ireland

Service

Northern Ireland

Tel.: 1890 930 034

(0,08 EUR/Min.,

(peak))

(0,06 EUR/Min.,

(off peak))

E-Mail: [email protected]

IAN 302330

Importer

Please note that the follow-

ing address is not a service

address. Please initially

contact the service centre

specied above.

Grizzly Tools

GmbH & Co. KG

Stockstädter Straße 20

63762 Großostheim

Germany

www.grizzly-service.eu

18

DE AT CH

Einleitung

Herzlichen Glückwunsch

zum Kauf Ihres neuen

Gerätes.

Sie haben sich damit für

ein hochwertiges Gerät

entschieden. Dieses Gerät

wurde während der Produk-

tion auf Qualität geprüft

und einer Endkontrolle

unterzogen. Die Funktions-

fähigkeit Ihres Gerätes ist

somit sichergestellt.

Inhalt

Einleitung ....................18

Bestimmungs ge mäße

Verwendung ................ 19

Allgemeine

Beschreibung ..............19

Lieferumfang .................. 19

Funktionsbeschreibung ..... 19

Übersicht ....................... 19

Technische Daten .........19

Sicherheits hinweise .....20

Symbole und Bildzeichen . 20

Sicherheitshinweise für

Akku-Lampen .................. 21

Verwendung und Behandlung

des Akkuwerkzeugs ........ 22

Ladevorgang ..............25

Akku entnehmen /

einsetzen ....................... 26

Akku auaden ................ 26

Verbrauchte Akkus .......... 26

Ladezustand

des Akkus prüfen ............ 27

Original EG-Konformi-

tätserklärung .............. 37

Betrieb ........................27

Ein-/Ausschalten ............. 27

Arbeitshinweise ..........27

Aufhänger ..................... 27

Magnet ......................... 27

Akku-LED-Arbeitslicht

schwenken ..................... 28

Schnapp verschluss .......... 28

Stativ-Gewinde ............... 28

Wartung .....................28

Reinigung ...................28

Lagerung ....................29

Entsorgung /

Umweltschutz .............29

Zubehör ......................29

Garantie .....................30

Reparatur-Service .......32

Service-Center ............. 32

Importeur ...................32

Die Betriebsanleitung

ist Bestandteil dieses

Gerätes. Sie enthält

wichtige Hinweise für

Sicherheit, Gebrauch und

Entsorgung. Machen Sie

sich vor der Benutzung des

Gerätes mit allen Bedien-

und Sicherheitshinweisen

vertraut. Benutzen Sie das

Gerät nur wie beschrieben

und für die angegebenen

Einsatzbereiche. Bewahren

Sie die Betriebsanleitung

gut auf und händigen Sie

19

CHATDE

alle Unterlagen bei

Weitergabe des Gerätes

an Dritte mit aus.

Bestimmungs ge-

mäße Verwendung

Das rüttelfeste Akku-LED-Ar-

beitslicht eignet sich zum

Ausleuchten trockener,

schlecht beleuchteter Innen-

bereiche, wie zum Beispiel

Garagen, Keller oder Dach-

böden.

Das Akku-LED-Arbeitslicht ist

nicht zur Raumbeleuchtung

im Haushalt geeignet.

Das Akku-LED-Arbeitslicht ist

nicht für den kommerziellen

Gebrauch geeignet.

Allgemeine

Beschreibung

Die Abbildun-

gen nden Sie

auf der Ausklappseite.

Lieferumfang

Packen Sie das Gerät aus

und kontrollieren Sie, ob es

vollständig ist. Entsorgen

Sie das Verpackungsmate-

rial ordnungsgemäß.

- Akku-LED-Arbeitslicht

- Akku

- Ladegerät

- Betriebsanleitung

Funktionsbeschreibung

Die Funktion der Bedienteile

entnehmen Sie bitte den

nachfolgenden Beschrei-

bungen.

Übersicht

1 Akku

2 Entriegelungstasten

Akku

3 Gerätegehäuse

4 Ladezustandsanzeige

Akku

5 Standfuß

6 Schnappverschluss

7 Aufhänger

8 Ein-/Ausschalter

9 LED-Licht

10 Netzkabel

11 Ladegerät

12 Ladezustandsanzeige

Ladegerät

13 Magnet

14 1/4"-Innengewinde

Technische Daten

Akku-LED-

Arbeitslicht ... PLLA 12-Li A1

Nennspannung U .. 12 V

Bemessungs-

leistung P

max

...............5 W

Anzahl der

Lampen (LED) ............... 10

Lichtstrom .............. 350 lm

Schutzklasse .............. III

III

Schutzart ................. IP20

20

DE AT CH

Akku (Li-Ion) ...PAP 12-Li A1

Anzahl der Batteriezellen 3

Nennspannung ......12 V

Kapazität ...............2,0 Ah

Ladezeit ................ ca. 1 h

Ladegerät .......PLG 12-Li A1

Nennaufnahme ........40 W

Eingangsspannung/

Input ... 220-240 V~, 50 Hz

Ausgangsspannung/

Output .........12 V 2,4 A

Schutzklasse .............. II

Schutzart.................. IPX0

Sicherheits hinweise

Symbole und

Bildzeichen

Bildzeichen auf dem Gerät:

Nicht zu verwenden

von Personen mit

Herzschrittmachern

oder implantierten

Debrillatoren

Elektrogeräte ge-

hören nicht in den

Hausmüll.

III

Schutzklasse III

Gleichspannung

Bildzeichen auf dem Akku:

Betriebsanleitung

lesen!

Werfen

Sie den

Akku

nicht in den Hausmüll, ins

Feuer oder ins Wasser.

Setzen Sie den Akku

nicht über längere

Zeit starker Sonnen-

einstrahlung aus und legen

Sie ihn nicht auf Heizkör-

pern ab (max. 45 °C).

Lagern Sie den

Akku in

gelade nem Zustand

Der Akku benötigt

eine Umgebungs-

temperatur von

+10°C bis +40°C.

Der Akku darf nicht

mit Wasser in Be-

rührung kommen.

Geben Sie Akkus an

einer Altbatteriesam-

melstelle ab, wo sie

einer umweltgerechten

Wiederverwertung

zugeführt werden.

Bildzeichen auf dem

Ladegerät:

Achtung!

Seite wird geladen ...

Parkside 302330 Translation Of The Original Instructions

Dieses Handbuch eignet sich auch für

Parkside 302330 Translation Of The Original Instructions

in anderen Sprachen

Verwandte Artikel