Parkside PHSL 900 B4 Benutzerhandbuch

Marke: Parkside

Modell: PHSL 900 B4

Kategorie: Power Heckenscheren

Typ: Benutzerhandbuch

LONG-REACH HEDGE TRIMMER PHSL 900 B4

LONG-REACH HEDGE TRIMMER

Translation of the original instructions

LANGSTIEL-HECKENSCHERE

Originalbetriebsanleitung

IAN 374124_2104

ΜΠΟΡΝΤΟΥΡΟΨΑΛΙΔΟ

ΜΕ ΜΑΚΡΥ ΚΟΝΤΑΡΙ

Μετάφραση των αυθεντικών οδηγιών λειτουργίας

GB / IE / NI/CY Translation of the original instructions Page 1

GR / CY Μετάφραση των αυθεντικών οδηγιών λειτουργίας Σελίδα 15

DE / AT / CH Originalbetriebsanleitung Seite 31

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of

the device.

Πριν ξεκινήσετε την ανάγνωση, ανοίξτε τη σελίδα με τις εικόνες και εξοικειωθείτε με όλες τις λειτουργίες

της συσκευής.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen

Funktionen des Gerätes vertraut.

GB│IE│NI│CY │ 1 ■

PHSL 900 B4

Contents

Introduction ............................................................ 2

Intended use ........................................................................2

Equipment ..........................................................................2

Package contents ....................................................................3

Technical speciﬁcations ...............................................................3

General power tool safety warnings ....................................... 4

1. Work area safety ..................................................................4

2. Electrical safety ...................................................................4

3. Personal safety ....................................................................5

4. Power tool use and care ............................................................5

5. Service ..........................................................................6

Appliance-speciﬁc safety instructions for hedge trimmers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Supplementary safety instructions for hedge trimmers ........................................7

RESIDUAL RISKS ....................................................................8

Additional safety instructions ...........................................................8

Before use ............................................................. 9

Motor unit ..........................................................................9

Attaching the round handle ............................................................9

Fixing/attaching the shoulder strap ......................................................9

Fitting the hedge trimmer ..............................................................9

Mounting the boom ..................................................................9

Swivelling the hedge trimmer ...........................................................9

Setting up ............................................................. 9

Switching on/oﬀ .....................................................................9

Adjusting the handle ..................................................................9

Working with the hedge trimmer .......................................................10

Use of the machine ..................................................................10

Cutting techniques ..................................................................10

Transport .............................................................10

Maintenance and cleaning ...............................................10

Storage ..............................................................10

Troubleshooting: hedgetrimmer ..........................................11

Maintenance intervals: hedgetrimmer ....................................11

Disposal ..............................................................11

Replacement parts .....................................................11

Kompernass Handels GmbH warranty ....................................12

Service ...............................................................13

Importer .............................................................13

Original declaration of conformity ........................................14

■ 2 │ GB│IE│NI│CY PHSL 900 B4

LONG-REACH HEDGE TRIMMER

PHSL 900 B4

Introduction

Congratulations on the purchase of your new appli-

ance. You have selected a high-quality product.

The operating instructions are part of this product.

They contain important information about safety,

usage and disposal. Before using the product,

please familiarise yourself with all operating and

safety instructions. Use the product only as

described and for the speciﬁed range of applica-

tions. Please also pass these operating instructions

on to any future owner.

Intended use

This tool is intended for cutting and trimming

hedges, bushes and ﬂowering shrubs in the home

garden. This is a hand-held appliance with an

integrated engine unit with linear reciprocating

cutting blades.

The appliance may only be used as described and

for the speciﬁed application areas. The appliance

is not intended for commercial use.

The appliance is designed for use by adults. This

appliance is not intended for use by anyone

(including children) with reduced physical, sensory

or mental capabilities or lack of experience and/or

knowledge. The use of the appliance in rain or in

humid environments is prohibited.

Any other usage or modiﬁcation of the appliance

is deemed to be improper and carries a signiﬁcant

risk of accidents. The manufacturer accepts no

responsibility for damage(s) attributable to misuse.

WARNING!

► Hedge trimmers are not suitable for use by

children.

Equipment

Motor unit

1 Tommy screw

2 Nut

3 Boom

4 Screw

5 Round handle

6 Carrying lug

7 Swivel element

8 Release button

9 Safety lock-out

0 On/Oﬀ switch

q Mains cable

w Strain relief

Hedge trimmer attachment

e Cutter bar

r Gearbox casing

t Lock/release

z Base plate (hedge trimmer)

u Control lever

i Handle

o Front boom

p Locking pin

a Drive shaft

s Protective cap

Boom

d Tommy screw

f Boom

g Locking pin

h Drive shaft

j Protective cap

Accessories

k Shoulder strap

l Blade guard

y Safety goggles

x Hexagon spanner 4 mm

GB│IE│NI│CY │ 3 ■

PHSL 900 B4

Package contents

1 motor unit PHSL 900 B4

1 hedge trimmer attachment

(hereinafter referred to as hedge trimmer)

1 boom

1 shoulder strap

1 blade guard

1 pair of safety goggles

1 hexagon spanner 4 mm

1 set of operating instructions

Technical speciﬁcations

Rated voltage 230 V ∼, 50 Hz (AC)

Rated output 900 W

Protection class II / (double insulation)

Weight, without handle

and shoulder strap approx. 4.9 kg

Idle speed 1000 rpm

Working angle –90° to +90°

Cut length 410 mm

Tooth spacing 20 mm

Weight (ready for use) approx. 5.2 kg

Noise and vibration data

Noise measurement value determined in accord-

ance with EN62841. The A-rated noise

level of the power tool is typically:

Sound pressure level: LPA = 81 dB (A)

Uncertainty K = 3 dB

Sound power level LWA = 102 dB (A)

Guaranteed sound power level LWA = 105 dB (A)

Uncertainty K = 3 dB

Vibration values (vector total of three directions)

determined in accordance with EN 62841:

Vibration on the front handle

Vibration emission value ah,D = 6,362m/s2

Uncertainty K = 1.5 m/s2

Vibration on the rear handle

Vibration emission value ah,D = 6.138 m/s2

Uncertainty K = 1.5 m/s2

Wear hearing protection!

This mark conﬁrms that the product

complies with the product safety

requirements applicable in the UK.

NOTE

► The vibration emission values and the noise

emission values given in these instructions

have been measured in accordance with a

standardised test procedure and can be used

for comparison of the power tool with

another tool.

► The speciﬁed total vibration values and the

noise emission values can also be used to

make a provisional load estimate.

WARNING!

► Depending on the manner in which the

power tool is being used, and in particular

the kind of workpiece that is being worked,

the vibration and noise emission values can

deviate from the values given in these instruc-

tions during actual use of the power tool.

► Try to keep the load as low as possible.

Measures to reduce the vibration load are,

e.g. wearing gloves and limiting the working

time. Wherein all states of operation must be

included (e.g. times when the power tool is

switched oﬀ and times where the power tool

is switched on but running without load).

■ 4 │ GB│IE│NI│CY PHSL 900 B4

Explanation of the symbols on the appliance

Read the operating instructions

and safety advice before initial

operation!

Wear protective gloves!

Wear safety shoes!

Wear hearing protection!

Wear a hard hat!

Wear safety goggles!

Keep bystanders away from the

appliance!

Protect the tool from rain and

moisture!

Risk of fatal electrical shock! Keep

at least 10m away from overhead

power lines.

Important! Beware of falling

objects, especially when cutting

above head height.

Important! Risk of injury due to

running blades.

Unplug the appliance immediately

if the cable is damaged or has

been cut.

Sound power level LWA in dB.

ATTENTION! Hot surface.

There is a risk of burns.

General power tool

safety warnings

WARNING!

►Read all safety warnings, instructions,

illustrations and speciﬁcations provided

with this power tool. Failure to follow all

instructions listed below may result in electric

shock, ﬁre and/or serious injury.

Save all warnings and instructions for future

reference.

The term „power tool“ in the warnings refers to

your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered

or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or

fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

2. Electrical safety

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded)

power tools. Unmodiﬁed plugs and matching

outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tric shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

GB│IE│NI│CY │ 5 ■

PHSL 900 B4

d) Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp

edges or moving parts. Damaged or entangled

cords increase the risk of electric shock.

e) When operating a power tool outdoors, use

an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces

the risk of electric shock.

f) If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD

reduces the risk of electric shock.

3. Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired

or under the inﬂuence of drugs, alcohol or

medication. A moment of inattention while

operating power tools may result in serious

personal injury.

b) Use personal protective equipment. Always

wear eye protection.

Protective equipment such

as a dust mask, non-slip safety shoes, hard hat or

hearing protection used for appropriate condi-

tions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the

switch is in the oﬀ-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools

with your ﬁnger on the switch or energising

power tools that have the switch on invites

accidents.

d) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key

left attached to a rotating part of the power tool

may result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away

from moving parts. Loose clothes, jewellery or

long hair can be caught in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use

of dust collection can reduce dust-related

hazards.

h) Do not let familiarity gained from frequent

use of tools allow you to become complacent

and ignore tool safety principles. A careless

action can cause severe injury within a fraction

of a second.

4. Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at

the rate for which it was designed.

b) Do not use the power tool if the switch does

not turn it on and oﬀ. Any power tool that

cannot be controlled with the switch is dangerous

and must be repaired.

c) Disconnect the plug from the power source

and/or remove the battery pack, if detach-

able, from the power tool before making any

adjustments, changing accessories, or storing

power tools. Such preventive safety measures

reduce the risk of starting the power tool acci-

dentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools and accessories. Check

for misalignment or binding of moving parts,

breakage of parts and any other condition

that may aﬀect the power tool’s operation. If

damaged, have the power tool repaired

before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

■ 6 │ GB│IE│NI│CY PHSL 900 B4

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions

and the work to be performed. Use of the

power tool for operations diﬀerent from those

intended could result in a hazardous situation.

h) Keep handles and grasping surfaces dry,

clean and free from oil and grease. Slippery

handles and grasping surfaces do not allow for

safe handling and control of the tool in unex-

pected situations.

5. Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replace-

ment parts. This will ensure that the safety of

the power tool is maintained.

Appliance-speciﬁc safety instructions

for hedge trimmers

■Keep your hands away from the cutting

blades. Do not attempt to clear clippings or

hold onto the material being cut while the

blades are still in motion. The blades keep

moving after the switch has been moved to

the Oﬀ position. A moment of inattention

while operating the hedge trimmer may result

in serious personal injury.

■Carry the hedge trimmer by the handle with

the blade at a standstill and be careful not

to activate the switch. Carrying the hedge

trimmer correctly will reduce the risk of acci-

dental activation and any resulting injury from

the blade.

■Hold the hedge trimmer only by the insulated

grips as the blade could come into contact

with hidden power lines or its own power

cable. Contact between the blade and a live

wire may make exposed metal parts of the

power tool live and could give the operator an

electric shock.

■Keep all mains cables away from the cutting

area. Cables can be hidden in hedges and

bushes and be cut accidentally by the blade.

■ When transporting or storing the hedge trimmer,

always pull the protective cover over the blades.

Proper handling of the hedge trimmer will

reduce the risk of injury from the blade.

■ Make sure that all switches are turned oﬀ and

the tool is unplugged when removing trapped

clippings or servicing the machine. Unexpected

activation of the hedge trimmer while removing

trapped material can cause serious injury.

■ Do not use the hedge trimmer in bad weather,

especially if there is a risk of a thunderstorm.

This reduces the risk of being struck by lightning.

■ Reduce the risk of a fatal electric shock by never

using the extended hedge trimmer near elec-

trical wires. Contact with, or use near, power

lines can cause serious injuries and/or a fatal

electric shock.

■ Always operate the extended hedge trimmer

with both hands. Hold the extended hedge

trimmer with both hands to prevent any loss of

control.

■ Wear a hard hat when working overhead with

the extended hedge trimmer. Falling branches

can result in serious injury.

■ Inspect the surface to be cut carefully and

remove any wires or other obstructions.

■ We recommend using a residual current circuit

breaker with a tripping current of 30 mA or less.

NOTE

► The hedge trimmer is supplied completely

assembled.

► Graphical representations illustrating the

usage of the hedge trimmer and its control

elements can be found on the fold-out page.

► Notes and diagrams of the settings, mainte-

nance and lubrication by the user can be

found in these instructions.

► Notes on the working position (see fold-out

page).

► Notes on the control elements (see fold-out

page).

► Notes on exchange and repair (see section

Maintenance and cleaning/service).

GB│IE│NI│CY │ 7 ■

PHSL 900 B4

NOTE

► Explanation of all graphical symbols used on

the hedge trimmer and technical data can be

found in these instructions.

► The features of the hedge trimmer can be

found in the technical data.

► Blocked tool: remove the jammed material

from the cutter bare.

CAUTION!

► In the event of imminent danger or an emer-

gency switch oﬀ the motor immediately and

unplug the appliance.

Supplementary safety instructions

for hedge trimmers

Preparation

a) THIS HEDGE TRIMMER CAN CAUSE SERIOUS

INJURIES! Read the instructions on correct

handling, preparation, maintenance, starting

and stopping the hedge trimmer very carefully.

Familiarise yourself with all control elements

and the proper use of the hedge trimmer.

b) Children must never use the hedge trimmer.

c) Beware of overhead power lines.

d) Do not use the hedge trimmer while other

people, especially children, are in the vicinity.

e) Wear suitable clothing! Do not wear loose

clothing or jewellery that could get caught

in moving parts. We recommend wearing

heavy-duty gloves, non-slip footwear and

goggles.

f) If the cutting unit comes into contact with a

foreign object, the operating noise increases or

the hedge trimmer starts to vibrate abnormally,

stop the motor and allow the hedge trimmer

to come to a standstill.

Take the following measures:

– check for damage;

– check for loose parts and secure all the

loose parts;

– replace damaged parts with equivalent

parts or have them repaired.

g) Wear hearing protection!

h) Wear safety goggles!

i) To stop the hedge trimmer in an emergency,

pull the mains plug from the mains socket.

Operation

a) Remove the plug from the wall socket before:

– cleaning or removing blockage;

– inspection, maintenance or work on the

hedge trimmer;

– setting the working position of the cutting

unit;

– if the hedge trimmer is left unattended.

b) Always make sure that the hedge trimmer is

in the proper working position and the tool

head is properly engaged before the engine

is started.

c) While operating the hedge trimmer, always

ensure that you have ﬁrm footing, especially

when using steps or a ladder.

d) Do not use the hedge trimmer if it has a

defective or badly worn cutting unit.

e) Ensure that all supplied handles and safety

guards are mounted when operating the hedge

trimmer. Never attempt to operate an incom-

pletely assembled hedge trimmer or a hedge

trimmer with non-approved modiﬁcations.

f) Hold the hedge trimmer ﬁrmly with both hands

on the designated handles.

g) Always familiarise yourself with your surround-

ings and be aware of potential dangers that

you may not be able to hear because of the

noise of the hedge trimmer.

■ 8 │ GB│IE│NI│CY PHSL 900 B4

Maintenance and storage

a) If the hedge trimmer is shut down for mainte-

nance, inspection or storage, switch oﬀ the

motor and make sure that all rotating parts have

come to a standstill. Allow the appliance to cool

down before carrying out an inspection, adjust-

ments, etc.

b) Store the hedge trimmer where the petrol

vapours cannot come into contact with ﬂames

or sparks. Always allow the hedge trimmer to

cool down before storage.

c) When transporting or storing the hedge trimmer,

cover the cutting unit with the protective cover

for the cutting unit.

RESIDUAL RISKS

Even if you operate this power tool properly, there

will still be residual risks. Due to the design and

construction of this power tool, the following

hazards may occur:

a) Cuts

b) Hearing damage, if no suitable hearing protec-

tion is worn.

c) Damage to health resulting from hand-arm

vibrations if the appliance is used for an

extended period of time or is not properly used

and maintained.

NOTE

► The hedge trimmer is supplied completely

assembled.

► Notes and diagrams of the settings, mainte-

nance and lubrication by the user can be

found in these instructions.

► Notes on exchange and repair (see section

Maintenance and cleaning/service).

► Explanation of all graphical symbols used on

the hedge trimmer and technical data can be

found in these instructions.

► The features of the hedge trimmer can be

found in the technical data.

► Blocked tool: remove the jammed material

from the cutter bar.

■ Use only the additional equipment and accesso-

ries speciﬁed in the operating instructions. Using

attachments or accessory tools other than those

recommended in the operating instructions can

lead to a risk of injury.

Additional safety instructions

■ Make sure that there are no bystanders or

animals within a radius of 15 metres when

using the tool. The operator is responsible for

third parties within the working area.

■ Keep the appliance, the cutting mechanism and

the blade guard in good condition to prevent

injury.

■ Children must be supervised to make sure that

they do not play with the appliance.

■ Do not use the tool until you have familiarised

yourself with its use.

■ Do not work with a damaged or incomplete

appliance or an appliance that has been modi-

ﬁed without the consent of the manufacturer.

Never use the tool with defective protective

equipment. Do not use the appliance if it has a

defective On/Oﬀ switch. Before use, check the

appliance's safety condition, especially the

blade and the saw chain. If the tool has been

dropped, check it for signiﬁcant damage or

defects.

■ Never start the tool before it is correctly assem-

bled.

■ When starting and operating the tool, ensure

that it does not come into contact with the

ground, stones, wire or other foreign material.

Switch oﬀ the appliance before you put it down.

■ The device is designed for two-handed opera-

tion. Never work with one hand.

■ Make sure that the appliance is switched oﬀ

when relocating the appliance and that you

cannot accidentally touch the On/Oﬀ switch.

Carry the appliance with the blade facing back-

wards. Fit the blade guard during transporta-

tion.

GB│IE│NI│CY │ 9 ■

PHSL 900 B4

Before use

WARNING! RISK OF INJURY!

► Pull out the mains plug before carrying out

any work on the tool.

Risk of electric shock!

Motor unit

Attaching the round handle

♦ Fit the round handle5 in the desired position

on the boom3.

♦ Tighten the screw4.

Fixing/attaching the shoulder strap

♦ Hook the shoulder strapk into the carrying

lug 6.

♦ Adjust the length of the shoulder strap k to

your size so that the carrying lug 6 is at hip

height when the strap is hooked in place.

Fitting the hedge trimmer

♦ Push the front boomo of the hedge trimmer

onto the boom3 of the motor unit.

♦ The locking pinp must engage.

♦ Screw the two booms3 o together with the

tommy screw1.

Mounting the boom

♦ Push the boomf onto the boom3 of the

motor unit.

♦ The locking ping must click into place.

♦ Screw the two booms3 f together with the

tommy screw1.

Swivelling the hedge trimmer

♦ Undo the lock/releaset.

♦ Press the control leveru and swivel the hedge

trimmer into the desired position.

♦ Allow the control leveru and the lock/

releaset to click into the recess in the base

plate (hedge trimmer)z.

Setting up

NOTE

► Comply with regulations regarding noise

protection and local rules. Using the appli-

ance on certain days (e.g. on Sundays and

public holidays), during certain times

(midday, night time) or in certain locations

(e.g. health resorts, clinics, etc.) may be

restricted or prohibited.

Switching on/oﬀ

Switching on

♦ Connect the mains cableq to the extension

cable.

♦ Form a loop at the end of the extension cable

and hang it in the strain reliefw.

♦ Press the safety lock-out9 and keep it pressed;

then press the On/Oﬀ switch0. You can now

release the switch-on lock 9 again.

Switching oﬀ

♦ Release the On/Oﬀ switch0.

♦ Remove the extension cable from the strain

reliefw.

♦ Disconnect the mains cableq from the exten-

sion cable.

Adjusting the handle

♦ Press the release button8. Turn the swivel

element7 to the desired position. Let go of the

release button8; it must click into place.

■ 10 │ GB│IE│NI│CY PHSL 900 B4

Working with the hedge trimmer

Use of the machine

NOTE

► Please note that legal restrictions in your

country may limit your use of the hedge

trimmer.

► Inspect the hedge trimmer daily before every

use. Also check the appliance after knocks

and drops to identify any signiﬁcant damage

or defects.

► Wear sturdy shoes and snug-ﬁtting clothing to

reduce the risk of accidents. Stand ﬁrmly on

the ground, pay attention to your balance

and always use the supplied shoulder strap!

► For the sake of your health, take regular

breaks while working. Physical fatigue

increases the risk of injury!

WARNING!

► Never use the appliance when you are tired

or ill or under the inﬂuence of alcohol or

other drugs or medications.

Cutting techniques

■ See fold-out page (Figure A).

NOTE

► Remove thicker branches with a branch

cutter.

Transport

■ Use the blade guardl when transporting

the appliance.

■ Ensure that the appliance cannot switch on

during transport.

WARNING! RISK OF INJURY!

■ Risk of injury! This folded position is only for

transport and storage; working in this position

is prohibited!

Maintenance and cleaning

WARNING! If the mains cable needs

to be replaced, it must be carried out

by the manufacturer or an authorised

representative in order to prevent

safety hazards.

■ The motor unit must always be kept clean, dry

and free from oil or grease.

■ The hedge trimmer must be cleaned of sawdust

at regular intervals.

♦ Use a dry cloth to clean the housing.

♦ Check the hedge trimmer for loose screws on

the cutter bare and tighten them, if necessary.

♦ Remove stuck cuttings.

♦ Maintain the cutter bare using an oil spray or

an oil can.

Storage

■ Always clean the appliance thoroughly before

storage.

■ Store the appliance in the supplied blade

guardl in a dry place and out of the reach

of children.

■ Store the appliance horizontally or secured

against falling.

GB│IE│NI│CY │ 11 ■

PHSL 900 B4

Troubleshooting:

hedgetrimmer

Problem Possible cause Trouble-

shooting

Motor is

running,

blades do

not move

Hedge trimmer attachment

or pole pruner attachment

is not connected properly

to the motor unit

Check

assembly

Maintenance intervals:

hedgetrimmer

The ﬁgures given here are based on normal oper-

ating conditions. In diﬃcult conditions, e.g. heavy

dust formation and longer daily working hours, the

speciﬁed intervals must be shortened accordingly.

Before starting work

After completion of work

As required

Tool part Action

Cutting blade Visual inspection X

Cleaning X X

Disposal

The packaging is made from environ-

mentally friendly material and can be

disposed of at your local recycling

plant. The tool and its accessories are

made from various materials, such as metal and

plastic.

Your local community or municipal authorities can

provide information on how to dispose of the

worn-out appliance.

Environmental protection

■ Dispose of contaminated maintenance material

and consumables at a collection point provided

for this purpose.

Do not dispose of power tools

in the normal domestic waste!

According to the European Directive

2012/19/EU, used power tools must

be collected separately and recycled in an environ-

mentally sound manner.

Dispose of the packaging in an en viron-

mentally friendly manner. Note the

labelling on the packaging and sepa-

rate the packaging material compo-

nents for disposal, if necessary. The packaging

material is labelled with abbreviations (a) and

numbers (b) with the following meanings:

1–7: plastics, 20–22: paper and cardboard,

80–98: composites.

Your local community or municipal

authorities can provide information on

how to dispose of the worn-out product.

Replacement parts

Replacement parts can be ordered directly from

the service centre. Please provide the machine type

and part number when making an order.

■ 12 │ GB│IE│NI│CY PHSL 900 B4

Kompernass Handels GmbH

warranty

Dear Customer,

This appliance has a 3-year warranty valid from

the date of purchase. If this product has any faults,

you, the buyer, have certain statutory rights. Your

statutory rights are not restricted in any way by the

warranty described below.

Warranty conditions

The warranty period starts on the date of purchase.

Please keep your receipt in a safe place. This will

be required as proof of purchase.

If any material or manufacturing fault occurs within

three years of the date of purchase of the product,

we will either repair or replace the product for you

or refund the purchase price (at our discretion).

This warranty service requires that you present the

defective appliance and the proof of purchase

(receipt) within the three-year warranty period,

along with a brief written description of the fault

and of when it occurred.

If the defect is covered by the warranty, your

product will either be repaired or replaced by us.

The repair or replacement of a product does not

signify the beginning of a new warranty period.

Warranty period and statutory claims

for defects

The warranty period is not prolonged by repairs

eﬀected under the warranty. This also applies to

replaced and repaired components. Any damage

and defects present at the time of purchase must

be reported immediately after unpacking. Repairs

carried out after expiry of the warranty period shall

be subject to a fee.

Scope of the warranty

This appliance has been manufactured in accord-

ance with strict quality guidelines and inspected

meticulously prior to delivery.

The warranty covers material faults or production

faults. The warranty does not extend to product

parts subject to normal wear and tear or to fragile

parts which could be considered as consumable

parts such as switches or parts made of glass.

The warranty does not apply if the product has

been damaged, improperly used or improperly

maintained. The directions in the operating

instructions for the product regarding proper use

of the product are to be strictly followed. Uses

and actions that are discouraged in the operating

instructions or which are warned against must be

avoided.

This product is intended solely for private use and

not for commercial purposes. The warranty shall

be deemed void in cases of misuse or improper

handling, use of force and modiﬁcations / repairs

which have not been carried out by one of our

authorised Service centres.

The warranty period does not apply to

■ Normal reduction of the battery capacity

over time

■ Commercial use of the product

■ Damage to or alteration of the product by the

customer

■ Non-compliance with safety and maintenance

instructions, operating errors

■ Damage caused by natural hazards

GB│IE│NI│CY │ 13 ■

PHSL 900 B4

Warranty claim procedure

To ensure quick processing of your case, please

observe the following instructions:

■ Please have the till receipt and the item number

(IAN) 374124_2104 available as proof of

purchase.

■ You will ﬁnd the item number on the type plate

on the product, an engraving on the product,

on the front page of the operating instructions

(below left) or on the sticker on the rear or

bottom of the product.

■ If functional or other defects occur, please

contact the service department listed either by

telephone or by e-mail.

■ You can return a defective product to us free

of charge to the service address that will be

provided to you. Ensure that you enclose the

proof of purchase (till receipt) and information

about what the defect is and when it occurred.

You can download these instructions

along with many other manuals,

product videos and installation

software at www.lidl-service.com.

This QR code will take you directly to the Lidl

service page (www.lidl-service.com) where you

can open your operating instructions by entering

the item number (IAN) 374124_2104.

NOTE

► For Parkside tools, please send us only the

defective item without the accessories (e.g.

battery, storage case, assembly tools, etc.).

WARNING!

►Have your tools repaired by the Service

Centre or a qualiﬁed electrician and only

using genuine replacement parts. This will

ensure that the safety of the tool is main-

tained.

►Always ensure that the power plug and

power cord are replaced only by the manu-

facturer of the appliance or the company

customer service. This will ensure that the

safety of the tool is maintained.

Service

Service Great Britain

Tel.: 0800 404 7657

E-Mail: [email protected]

Service Ireland

Tel.: 1890 930 034

(0,08EUR / Min.,(peak))

(0,06EUR / Min.,(oﬀ peak))

E-Mail: [email protected]

CY Service Cyprus

Tel.: 8009 4409

E-Mail: [email protected]

IAN 374124_2104

Importer

Please note that the following address is not the

service address. Please use the service address

provided in the operating instructions.

For EU market

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

For GB market

Lidl Great Britain Ltd

Lidl House 14 Kingston Road

Surbiton

KT5 9NU

■ 14 │ GB│IE│NI│CY PHSL 900 B4

Original declaration of conformity

We, KOMPERNASS HANDELS GMBH, document oﬃcer: Mr Semi Uguzlu, BURGSTR. 21,

44867 BOCHUM, GERMANY, hereby declare that this product complies with the following standards,

normative documents and EC directives:

Machinery Directive (2006/42/EC)

EMC (Electromagnetic Compatibility) (2014/30/EU)

Directives on noise emission 2000/14/EC, 2005/88/EC

Notiﬁed body no. 0036

TÜV SÜD Industrie Service GmbH, Westendstrasse 199, 80686 Munich, Germany

Evaluation procedure for conformity as per appendix V.

Sound power level LWA: measured 102 dB (A), guaranteed 105 dB (A)

RoHS Directive (2011/65/EU)*

* The manufacturer bears the full responsibility for compliance with this conformity declaration. The subject of the

declaration described above meets the requirements of Directive 2011/65/EU of the European Parliament and

Council of 8 June 2011 on the limitations of use of certain dangerous substances in electrical and electronic

appliances.

Applied harmonised standards

EN 62841-1:2015

EN 62841-4-2:2019

EN 55014-1:2017/A11:2020

EN 55014-2:1997/A2:2008

EN 55014-2:2015

EN 61000-3-2:2014

EN IEC 61000-3-2:2019

EN 61000-3-3:2013

EN 61000-3-3:2013/A1:2019

EN IEC 63000:2018

Type/appliance designation: Long-Reach Hedge Trimmer PHSL 900 B4

Year of manufacture: 10–2021

Serial number: IAN 374124_2104

Bochum, 17/08/2021

Semi Uguzlu

- Quality Manager -

We reserve the right to make technical changes in the context of further product development.

GR│CY │ 15 ■

PHSL 900 B4

Περιεχόμενα

Εισαγωγή .............................................................16

Προβλεπόμενη χρήση ...............................................................16

Εξοπλισμός .......................................................................16

Παραδοτέος εξοπλισμός .............................................................17

Τεχνικά χαρακτηριστικά ..............................................................17

Γενικές υποδείξεις ασφαλείας για ηλεκτρικά εργαλεία .........................18

1. Ασφάλεια στο χώρο εργασίας .......................................................18

2. Ηλεκτρική ασφάλεια ...............................................................19

3. Ασφάλεια ατόμων ................................................................19

4. Χρήση και χειρισμός του ηλεκτρικού εργαλείου .........................................20

5. Σέρβις .........................................................................20

Συγκεκριμένες υποδείξεις ασφαλείας για ψαλίδια μπορντούρας ..............................20

Συμπληρωματικές υποδείξεις ασφαλείας για τα ψαλίδια μπορντούρας .........................22

ΥΠΟΛΕΙΠΟΜΕΝΟΙ ΚΙΝΔΥΝΟΙ ......................................................23

Περαιτέρω υποδείξεις ασφαλείας ......................................................23

Πριν από τη θέση σε λειτουργία ...........................................24

Μονάδα μοτέρ .....................................................................24

Συναρμολόγηση της στρογγυλής λαβής .................................................24

Στερέωση/συναρμολόγηση ιμάντα ώμου .................................................24

Συναρμολόγηση ψαλιδιού μπορντούρας ................................................24

Συναρμολόγηση βραχίονα ...........................................................24

Περιστροφή ψαλιδιού μπορντούρας ....................................................24

Θέση σε λειτουργία .....................................................24

Ενεργοποίηση/Απενεργοποίηση .......................................................24

Ρύθμιση χειρολαβής .................................................................25

Εργασία με το ψαλίδι μπορντούρας ....................................................25

Χρήση μηχανήματος ................................................................25

Τεχνικές κοπής .....................................................................25

Μεταφορά ............................................................25

Συντήρηση και καθαρισμός ..............................................25

Αποθήκευση ..........................................................26

Αναζήτηση σφαλμάτων στοψαλίδι μπορντούρας ............................26

Διαστήματα συντήρησης ψαλιδιού μπορντούρας ............................26

Απόρριψη ............................................................26

Ανταλλακτικά .........................................................26

Εγγύηση της Kompernass Handels GmbH ..................................27

Σέρβις. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Εισαγωγέας ...........................................................28

Μετάφραση της πρωτότυπης δήλωσης συμμόρφωσης ........................29

■ 16 │ GR│CY PHSL 900 B4

ΜΠΟΡΝΤΟΥΡΟΨΑΛΙΔΟ ΜΕ

ΜΑΚΡΥ ΚΟΝΤΑΡΙ PHSL 900 B4

Εισαγωγή

Συγχαρητήρια για την αγορά της νέας σας συσκευ-

ής. Το προϊόν που αποκτήσατε είναι ένα προϊόν

υψηλής ποιότητας. Οι οδηγίες χρήσης αποτελούν

τμήμα αυτού του προϊόντος. Περιλαμβάνουν σημα-

ντικές υποδείξεις για την ασφάλεια, τη χρήση και

την απόρριψη. Πριν από τη χρήση του προϊόντος,

εξοικειωθείτε με όλες τις υποδείξεις χειρισμού και

ασφάλειας. Χρησιμοποιείτε το προϊόν αποκλειστικά

όπως περιγράφεται και για τους αναφερόμενους

τομείς χρήσης. Σε περίπτωση παράδοσης του προϊ-

όντος σε τρίτους, παραδώστε μαζί και όλα τα έγ-

γραφα.

Προβλεπόμενη χρήση

Η παρούσα συσκευή είναι σχεδιασμένη για την

κοπή και το τριμάρισμα φραχτών, θάμνων και

καλλωπιστικών θάμνων στα πλαίσια οικιακής χρή-

σης. Πρόκειται για μια φορητή συσκευή με ενσωμα-

τωμένο σύστημα μετάδοσης κίνησης, στην οποία

οι γραμμικά διατεταγμένες λεπίδες κινούνται πέ-

ρα-δώθε.

Χρησιμοποιείτε τη συσκευή μόνο όπως περιγράφε-

ται και για τους αναφερόμενους τομείς χρήσης.

Η συσκευή δεν προορίζεται για επαγγελματική

χρήση.

Η συσκευή προορίζεται για χρήση από ενήλικες.

Η συσκευή αυτή δεν προορίζεται για χρήση από

άτομα (συμπεριλαμβανομένων παιδιών) με περιορι-

σμένες φυσικές, αισθητηριακές ή νοητικές δυνατό-

τητες ή με έλλειψη εμπειρίας και/ή με έλλειψη γνώ-

σεων. Η χρήση της συσκευής σε βροχή ή υγρό

περιβάλλον απαγορεύεται.

Κάθε άλλη χρήση ή μετατροπή της συσκευής θεω-

ρείται ως μη σύμφωνη με τους κανονισμούς και

ενέχει σημαντικούς κινδύνους ατυχημάτων. Για

βλάβες από χρήση μη σύμφωνη με τους κανονι-

σμούς, ο κατασκευαστής δεν αναλαμβάνει καμία

ευθύνη.

ΠΡΟΕΙΔΟΠΟΙΗΣΗ!

► Οι ψαλίδες κοπής δεν ενδείκνυνται για

χρήση από παιδιά.

Εξοπλισμός

Μονάδα μοτέρ

1 Βίδα με διάτρητη σφαιρική κεφαλή

2 Παξιμάδι

3 Βραχίονας

4 Βίδα

5 Στρογγυλή λαβή

6 Δακτύλιος μεταφοράς

7 Περιστρεφόμενο στοιχείο

8 Πλήκτρο απασφάλισης

9 Φραγή ενεργοποίησης

0 Διακόπτης ενεργοποίησης/απενεργοποίησης

q Καλώδιο τροφοδοσίας

w Ανακουφιστικό καταπόνησης

Προσάρτημα ψαλιδιού μπορντούρας

e Μαχαίρι

r Περίβλημα κιβωτίου μετάδοσης κίνησης

t Απασφάλιση/Ασφάλιση

z Πλάκα βάσης (ψαλίδι μπορντούρας)

u Μοχλός χειρισμού

i Χειρολαβή

o Μπροστινός βραχίονας

p Πείρος ασφάλισης

a Άξονας μετάδοσης κίνησης

s Προστατευτικό κάλυμμα

Βραχίονας

d Βίδα με διάτρητη σφαιρική κεφαλή

f Βραχίονας

g Πείρος ασφάλισης

h Άξονας μετάδοσης κίνησης

j Προστατευτικό κάλυμμα

Εξαρτήματα

k Ιμάντας ώμου

l Προστατευτική θήκη κατευθυντήριας λάμας

y Προστατευτικά γυαλιά

x Εξάγωνο κλειδί 4 mm

Seite laden ...

Parkside PHSL 900 B4 Benutzerhandbuch

Marke: Parkside

Modell: PHSL 900 B4

Kategorie: Power Heckenscheren

Typ: Benutzerhandbuch

PDF Herunterladen

Bericht

in anderen Sprachen

English: Parkside PHSL 900 B4 User manual

Parkside PHSL 900 B4 Benutzerhandbuch

Parkside PHSL 900 B4 Benutzerhandbuch

in anderen Sprachen

Verwandte Papiere

Sonstige Unterlagen