Silvercrest SSP 2600 A1 Operating Instructions Manual

Marke: Silvercrest

Modell: SSP 2600 A1

Typ: Operating Instructions Manual

BLUETOOTH

SELFIE STICK SSP 2600 A1

IAN 279393

Bluetooth

SELFIE STICK

Operating instructions

Bluetooth

-SELFIESTICK

Bedienungsanleitung

GB / IE / NI Operating instructions Page 1

DE / AT / CH Bedienungsanleitung Seite 19

Before reading, unfold the page containing the illustrations and

familiarise yourself with all functions of the device.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus

und machen Sie sich anschließend mit allen Funktionen des

Gerätes vertraut.

SSP 2600 A1

│

NI │ 1 ■

Contents

Introduction ........................ 2

Information about these operating instructions ....2

Notes on trademarks .......................2

Proper use ...............................2

Warning symbols used ......................3

Safety ............................ 3

Basic safety instructions .....................3

Description of components ........... 6

Operation ......................... 6

Check package contents ....................6

Disposal of the packaging ...................7

Charging the power bank ...................7

Checking the charge level ...................8

Handling and use ................... 8

Charging mobile devices with the power bank . . . 8

Using the selﬁe stick ........................9

Connecting the selﬁe stick and smartphone/

compact camera via Bluetooth

.............9

Assembling the selﬁe stick ..................10

Attaching a smartphone to the selﬁe stick ......10

Attaching a compact camera to the selﬁe stick . . 11

Taking selﬁes ............................11

Turning oﬀ the appliance ...................11

Troubleshooting ................... 12

Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . 14

Storage when not in use ............ 14

Disposal .......................... 14

Disposal of the device .....................14

Appendix ......................... 15

Technical details ..........................15

Notes on the EU Declaration of Conformity .....15

Kompernass Handels GmbH warranty ........16

Service .................................17

Importer ................................18

SSP 2600 A1

■ 2 │ GB

│

Introduction

Information about these operating

instructions

Congratulations on the purchase of your new device.

You have selected a high-quality product. The operat-

ing instructions are part of this product. They contain

important information about safety, usage and disposal.

Before using the product, please familiarise yourself

with all operating and safety instructions. Use the prod-

uct only as described and for the range of applications

speciﬁed. Retain these instructions for future reference.

Please also pass these operating instructions on to any

future owner.

This documentation is protected by copyright. Any copy-

ing or reproduction, including in the form of extracts, or

any reproduction of images (even in a modiﬁed state),

is permitted only with the written authorisation of the

manufacturer.

Notes on trademarks

USB

is a registered trademark of USB Implementers

Forum, Inc.

The Bluetooth

logotype and Bluetooth

logo are

registered trademarks of Bluetooth SIG, Inc. (Special

Interest Group). Any use of the trademarks by Komper-

naß Handels GmbH is made under the provisions of

a licence.

All other names and products may be trademarks or

registered trademarks of their respective owners.

Proper use

This device is an information technology device and is

intended exclusively for taking selﬁes (self-portraits) via

a smartphone or a compact camera and for charging

mobile devices that charge via USB port by default.

The device is not intended for any other purpose, nor

for use beyond the scope described. The device is not

intended for use in commercial or industrial environ-

ments. The manufacturer accepts no responsibility for

damage caused by failure to observe these instructions,

improper use or repairs, unauthorised modiﬁcations

or the use of unapproved replacement parts. The risk

shall be borne solely by the user.

SSP 2600 A1

│

NI │ 3 ■

Warning symbols used

The following warning symbols are used in these

operating instructions:

DANGER

A warning notice at this hazard level indi-

cates an imminently hazardous situation.

Failure to avoid this hazardous situation could result

in severe injuries or even death.

► Follow the instructions in this warning notice to

avoid the risk of serious injuries or death.

CAUTION

A warning notice at this hazard level indi-

cates a risk of material damage.

Failure to avoid this situation could result in material

damage.

► Follow the instructions in this warning notice to

prevent material damage.

NOTE

► A note provides additional information, which

will assist you in using the device.

Safety

This section contains important safety instructions for

using the device. This device complies with statutory

safety regulations. Improper use may result in personal

injury and property damage.

Basic safety instructions

■ This device may be used by children aged 8 years

and above and by persons with limited physical,

sensory or mental capabilities, or lack of experi-

ence and knowledge, provided that they are under

supervision or have been told how to use the de-

vice safely and are aware of the potential risks.

Children must not play with the device. Cleaning

and user maintenance tasks may not be carried out

by children unless they are supervised.

■ Check the device for visible external damage be-

fore use. Do not operate a device that has been

damaged or dropped.

SSP 2600 A1

■ 4 │ GB

│

■ Always place the device on a stable and level

surface. It can be damaged if dropped.

■ Ensure that all device components are ﬁrmly attached

when using the device.

■ Hold the device ﬁrmly to prevent it from falling down.

■ Do not expose the device to direct sunlight or high

temperatures. Otherwise it may overheat and be

irreparably damaged.

■ Do not place the product near heat sources such

as radiators or other heat-generating devices.

■ Keep the appliance away from open ﬂames (e.g.

candles) at all times.

■ The device is not designed for use in rooms with

high temperatures or humidity (e.g. bathrooms)

or where there is excessive dust.

■ Never expose the device to extreme heat. This

particularly applies to storage in a car. Extreme

temperatures can occur in car interiors and glove

compartments during long periods of immobilisa-

tion. Remove electrical and electronic devices from

the vehicle.

■ Do not use the device immediately after moving it

from a cold room to a warm room. Always allow

the device to acclimatise before turning it on.

■ Never open the device housing. None of the com-

ponents in the device can be serviced or replaced

by the user.

■ Do not make any unauthorised modiﬁcations or

alterations to the device.

■ All repairs must be carried out by authorised special-

ist companies or by the customer service depart-

ment. Improper repairs may put the user at risk. It

will also invalidate any warranty claims.

■ Do not expose the device to water spray or drip-

ping water, and do not place liquid-ﬁlled objects

such as vases or open drink containers on or near

the device.

■ Turn the device oﬀ immediately and disconnect any

connected charging cables from the device if you

smell fumes or notice any smoke. Have the device

checked by a qualiﬁed specialist before using it

again.

SSP 2600 A1

│

NI │ 5 ■

■ If you are using a USB power supply, the used

socket must always be easily accessible so that the

USB power supply can be quickly disconnected

from the socket in a hazardous situation. You

should also observe the operating instructions for

the USB power supply.

■ DANGER! Improper use of the batteries can

cause ﬁres, explosions, leakages or other hazards!

Do not throw the device into a ﬁre, since the inte-

grated battery may explode.

■ Comply with all restrictions or prohibitions on

use for battery-powered devices in locations with

speciﬁc hazard risks, such as petrol stations, aero-

planes, hospitals, etc.

■ Ensure that the smartphone or compact camera

that you use does not exceed the maximum weight

of 500 g as the device could otherwise be dam-

aged.

■

DANGER! Do not allow children to play with

the packaging material! Keep all packaging

materials away from children. There is a risk of

suﬀocation!

SSP 2600 A1

■ 6 │ GB

│

Description of components

(See fold-out page for illustrations)

 Mount for smartphone

 Threaded mount

 Threaded tripod head

 Fastening screw

 Telescopic shaft

 Photo button

 Bluetooth

LED

 On/Oﬀ button

 Charge level LEDs

 micro-USB charging port (input)

- USB port (output)

3 Fastening screw hinge joint

! Charging cable (USB to micro-USB)

. Operating instructions (symbol)

Operation

Check package contents

(See fold-out page for illustrations)

The product includes the following components:

▯ Mount for smartphone

▯ Telescopic shaft

▯ Handle

▯ Charging cable

▯ These operating instructions

♦ Remove all parts of the appliance from the packag-

ing and remove all packaging materials.

NOTE

► Check the package for completeness and signs

of visible damage.

► If any items are missing or damaged as a result

of defective packaging or transportation, contact

the service hotline (see section "Service").

SSP 2600 A1

│

NI │ 7 ■

Disposal of the packaging

The packaging protects the device from

damage during transport. The packaging

materials have been selected for their en-

vironmental friendliness and ease of dis-

posal, and are therefore recyclable.

Returning the packaging to the material cycle conserves

raw materials and reduces the amount of waste that

is generated. Dispose of packaging materials that are

no longer needed in accordance with applicable local

regulations.

Charging the power bank

Before using the power bank, the integrated battery

must be fully charged.

CAUTION

► The power bank must never be charged and used

for charging an external device at the same time.

► Only use power supplies with an output voltage

of 5V and an output current of at least 1A or

a USB 3.0 port on your computer to charge the

power bank. You can recognise the USB 3.0

port due to the blue marking.

► When charging via a USB port, ensure that at

least one further USB port remains free. This also

applies when using USB 3.0 ports.

► Not all USB 2.0 ports deliver suﬃcient power to

charge the power Bank. If this is the case, use an

external power supply or a USB 3.0 port.

♦ Disconnect the selﬁe stick with the integrated power

bank from the telescopic shaft , if necessary,

by rotating the selﬁe stick anticlockwise until it be-

comes loose. You can now pull oﬀ the selﬁe stick.

♦ Connect the USB plug of the charging cable ! to a

turned-on PC or a USB power supply (not included).

♦ Connect the micro-USB plug of the charging cable

! to the micro-USB port  on the power bank. A

rough estimate of the charge level is shown during

charging by means of the charge level LEDs .

SSP 2600 A1

■ 8 │ GB

│

LED display Charge level

One LED is ﬂashing Less than 20%

One LED is on, the second

LED is ﬂashing

20–49%

Two LEDs are on, the third

LED is ﬂashing

50–74%

Three LEDs are on, the fourth

LED is ﬂashing

75–99%

All LEDs are on 100%

Checking the charge level

You can also check the charge level of the power

bank when it is not charged or while it is being used

for charging.

♦ Press the on/of button  brieﬂy. The charging

status LEDs  show the current charge level of the

power bank for about 30 seconds.

LED display Charge level

Four LEDs are on More than 75%

Three LEDs are on 50–74%

Two LEDs are on 25–49%

One LED is on 3–24%

One LED is ﬂashing Less than 3%

Handling and use

Charging mobile devices with the

power bank

♦ Connect the micro-USB plug of the charging cable !

to the micro-USB port of the mobile device you want

to charge and the USB plug to the USB port -

on the power bank. The charging process starts

automatically.

♦ If charging does not start automatically, press the

On/Oﬀ button  brieﬂy to start the charging

process.

NOTE

► Alternatively, you can also use the original charg-

ing cable (USB cable) provided by the respective

device manufacturer.

SSP 2600 A1

│

NI │ 9 ■

♦ During the charging process, the current charge

level of the power bank is shown via the charge

level LEDs  (see table in section "Checking the

charge level").

♦ To stop charging, disconnect the charging cable !

from the mobile device and the power bank.

The charging status LEDs  go oﬀ after about

30 seconds.

Using the selﬁe stick

Before you use the selﬁe stick, you must ﬁrst pair it with

your smartphone or compact camera via Bluetooth

This pairing creates a link between your smartphone or

your compact camera and the selﬁe stick.

NOTE

► Make sure that the battery of the power bank is

charged; otherwise the selﬁe stick will not work.

If necessary, charge the power bank battery

before using the selﬁe stick. Refer also to section

"Charging the power bank".

Connecting the selﬁe stick and smart-

phone/compact camera via Bluetooth

♦ Turn on your smartphone or compact camera and

activate the Bluetooth

function.

♦ Press and hold the On/Oﬀ button  for about

2 seconds to activate the Bluetooth

function.

The Bluetooth

LED  lights up for approx.

7 seconds and then ﬂashes for one minute. The

charging status LEDs  light up and then go oﬀ

after about 30 seconds.

♦ Set the smartphone so that it scans for Bluetooth

devices. You will ﬁnd a detailed description of

how to do this in the operating instructions for your

smartphone.

♦ Select SSP 2600 A1 from the list of found devices

on your smartphone to pair the two devices. The

Bluetooth

LED  stops ﬂashing when pairing

is successful.

SSP 2600 A1

■ 10 │ GB

│

♦ If you want to stop the Bluetooth

connection

with your selﬁe stick, for instance, to separate the

devices, press the On/Oﬀ button for 2 seconds.

The Bluetooth

LED  ﬂashes 3 times. The

charging status LEDs  light up and then go oﬀ

after about 30 seconds. The Bluetooth

function

is now turned oﬀ.

NOTE

► Press and hold the On/Oﬀ button  of the selﬁe

stick for 2 seconds to turn on the Bluetooth

function. The Bluetooth

LED  lights up for

approx. 7 seconds.

The charging status LEDs  light up and then

go oﬀ after about 30 seconds. The devices are

now connected via Bluetooth

. You may have

to conﬁrm the Bluetooth

connection on your

smartphone.

Assembling the selﬁe stick

♦ Screw one of the threads on the mount  onto the

thread of the tripod head . You can assemble the

mount  vertically or horizontally. Fix the required

position using the fastening screw .

♦ Push the telescopic shaft  into the holes on the

selﬁe stick handle. Turn the telescopic shaft  clock-

wise a little until the telescopic shaft clicks into

the selﬁe stick. The telescopic shaft  and the

selﬁe stick are now connected to each other.

Attaching a smartphone to the selﬁe stick

♦ Open the mount  by pulling the spring clip open.

♦ Place your smartphone into the mount .

♦ Release the clip so that the clip snaps onto your

smartphone. Ensure that your smartphone is ﬁrmly

in place in the mount .

♦ Set the vertical tilt angle of the smartphone. Loosen

the fastening screw hinge joint 3 on the mount by

turning it anticlockwise. Lock the smartphone into

this position by turning the fastening screw hinge

joint 3clockwise.

♦ Set the horizontal alignment of the smartphone.

Undo the fastening screw on the mount by turn-

ing it to the right. Turn the fastening screw to the

left to lock the smartphone into this position.

SSP 2600 A1

│

NI │ 11 ■

Attaching a compact camera to the

selﬁe stick

♦ Unscrew the mount  from the tripod head.

♦ Screw the compact camera onto the thread of the

tripod head .

♦ Set the horizontal alignment of the compact camera.

Undo the fastening screw on the mount by turning

it to the right. Turn the fastening screw  to the left

to lock the compact camera into this position.

♦ Set the vertical tilt angle of the compact camera.

Loosen the fastening screw hinge joint 3 on the

mount by turning it anticlockwise. Lock the compact

camera into this position by turning the fastening

screw hinge joint 3 clockwise.

Taking selﬁes

Pull out the telescopic shaft  to the desired length.

Turn the individual elements of the telescopic shaft 

clockwise to lock them in place.

♦ If you want to unlock the telescope shaft turn

the individual elements in the opposite direction

(anticlockwise).

♦ Turn the camera function of the smartphone on. If

you are using a compact camera, make the required

photo settings on the compact camera.

♦ Press the photo button  on the selﬁe stick. Your

smartphone or compact camera will take a photo.

The Bluetooth

LED ﬂashes brieﬂy and shows

an active Bluetooth

connection.

Turning oﬀ the appliance

♦ Press the On/Oﬀ button  for 2 seconds to turn

oﬀ the selﬁe stick. The Bluetooth

LED  ﬂashes

three times.

NOTE

► The appliance turns oﬀ automatically after around

5 minutes, if you do not press any buttons during

this time.

SSP 2600 A1

■ 12 │ GB

│

Troubleshooting

The power bank does not charge

♦ Connection may be faulty. Check the connection.

♦ Some computers deactivate the power supply to

the USB ports when they are turned oﬀ. Check that

the computer is turned on.

A connected device will not charge

♦ The integrated battery is empty. Charge the battery.

♦ No connection to the device. Check the connection.

♦ Press the On/Oﬀ button  brieﬂy to start the

charging process.

♦ The charging current of the connected device is too

low (< 60 mA) or too high (> 1 A).

The selﬁe stick cannot be turned on

♦ Make sure that the battery of the power bank is

charged; otherwise the selﬁe stick will not work. If

necessary, charge the power bank battery before

using the selﬁe stick. Refer also to section "Charg-

ing the power bank".

The Bluetooth

connection cannot be established

♦ The Bluetooth

function on the selﬁe stick is not

activated. To check this, press the photo button .

If the Bluetooth

function is activated, the Blue-

tooth

LED  lights up. If this is not the case, press

and hold the On/Oﬀ button for 2 seconds to

activate the Bluetooth

function on the selﬁe

stick.

♦ The Bluetooth

function on the smartphone

or compact camera is not activated. Activate the

Bluetooth

function. For further information, refer

to the operating instructions of your smartphone or

compact camera.

♦ The selﬁe stick and the smartphone or compact

camera are not paired. Make the connection as

described in the section "Connecting the selﬁe

stick and smartphone/compact camera via Blue-

tooth

". For further information, refer to the oper-

ating instructions of your smartphone or compact

camera.

SSP 2600 A1

│

NI │ 13 ■

The selﬁe stick does not trigger

♦ Check whether there is a Bluetooth

connection

between the devices. If the Bluetooth

connec-

tion is activated, the Bluetooth

LED  lights up

when you press the photo button . Establish a

connection between the selﬁe stick and your smart-

phone or your compact camera. See also section

"Connecting the selﬁe stick and smartphone/

compact camera via Bluetooth

♦ Various smartphone manufacturers (e.g. Sony)

use proprietary operating system versions for their

devices. This can lead to various malfunctions

when activating the trigger button, e.g. the camera

zooms instead of taking a picture. In this case,

check the settings of the operating system to see

whether there is a setting option to set the volume

control (+) as an additional trigger button.

NOTE

► If you cannot solve the problem with the above-

mentioned solutions, please contact the service

hotline (see section "Service").

SSP 2600 A1

■ 14 │ GB

│

Cleaning

CAUTION

Possible damage to the device.

There are no serviceable parts or parts requiring

cleaning inside the power bank. Moisture can cause

damage to the device.

► To avoid irreparable damage to the device,

ensure that no moisture penetrates the device

during cleaning.

► Do not use caustic, abrasive or solvent-based

cleaning materials. These can damage the

surfaces of the device.

♦ Clean the housing of the appliance with a lightly

moistened cloth and a mild detergent only.

Storage when not in use

♦ Store the device in a location which is clean, dry,

dust-free and not in direct sunlight.

♦ For long-term storage, the integrated battery should

be regularly charged to extend its operating life.

Disposal

Disposal of the device

The adjacent symbol of a crossed-out

dustbin means that this device is subject to

Directive 2012/19/EU. This directive

states that this device may not be disposed

of in normal household waste at the end of its life-

cycle, but must be brought to a specially designated

collection point, recycling depot or disposal company.

This disposal is free of charge for the user.

Protect the environment and dispose of this

device properly.

You can obtain further information from your local

disposal company or the city or local authority.

SSP 2600 A1

│

NI │ 15 ■

Appendix

Technical details

Integrated battery

3.6 V/2600 mAh

(lithium ion)

Input 5V

,1A

Output 5V

,1A

Minimum discharge current 60 mA

Bluetooth

version 4.0

Bluetooth

range approx. 8 metre

Supported operating systems

iOS 7.0 or higher

Android 4.4.4 or

higher

Windows 10

Usable smartphone width 6.5 cm–9 cm

Usable smartphone thickness max. 0.9 cm

Maximum load weight 500 g

Operating temperature 5°C to 45°C

Storage temperature 0°C to 50°C

Relative humidity

(no condensation)

10%–70%

Length of selﬁe stick

approx. 44 cm

up to 94 cm

Weight approx. 230g

Notes on the EU Declaration of

Conformity

This device complies with the basic require-

ments and other relevant provisions of the

R&TTE Directive 1999/5/EC and the

RoHS Directive 2011/65/EU.

The complete EU Declaration of Conformity is avail-

able from the importer.

SSP 2600 A1

■ 16 │ GB

│

Kompernass Handels GmbH warranty

Dear Customer,

This appliance has a 3-year warranty valid from the

date of purchase. If this product has any faults, you,

the buyer, have certain statutory rights. Your statutory

rights are not restricted in any way by the warranty

described below.

Warranty conditions

The validity period of the warranty starts from the date

of purchase. Please keep your original receipt in a

safe place. This document will be required as proof of

purchase.

If any material or production fault occurs within three

years of the date of purchase of the product, we will

either repair or replace the product for you at our

discretion. This warranty service is dependent on you

presenting the defective appliance and the proof of

purchase (receipt) and a short written description of

the fault and its time of occurrence.

If the defect is covered by the warranty, your product

will either be repaired or replaced by us. The repair or

replacement of a product does not signify the beginning

of a new warranty period.

Warranty period and statutory claims for

defects

The warranty period is not prolonged by repairs eﬀect-

ed under the warranty. This also applies to replaced

and repaired components. Any damage and defects

present at the time of purchase must be reported im-

mediately after unpacking. Repairs carried out after

expiry of the warranty period shall be subject to a fee.

Scope of the warranty

This appliance has been manufactured in accordance

with strict quality guidelines and inspected meticulously

prior to delivery.

The warranty covers material faults or production

faults. The warranty does not extend to product parts

subject to normal wear and tear or fragile parts such

as switches, batteries, baking moulds or parts made

of glass.

The warranty does not apply if the product has been

damaged, improperly used or improperly maintained.

The directions in the operating instructions for the

SSP 2600 A1

│

NI │ 17 ■

product regarding proper use of the product are to

be strictly followed. Uses and actions that are discour-

aged in the operating instructions or which are warned

against must be avoided.

This product is intended solely for private use and

not for commercial purposes. The warranty shall be

deemed void in cases of misuse or improper handling,

use of force and modiﬁcations / repairs which have

not been carried out by one of our authorised Service

centres.

Warranty claim procedure

To ensure quick processing of your case, please

observe the following instructions:

■ Please have the till receipt and the item number

(e.g. IAN 12345) available as proof of purchase.

■ You will ﬁnd the item number on the type plate,

an engraving on the front page of the instructions

(bottom left), or as a sticker on the rear or bottom

of the appliance.

■ If functional or other defects occur, please contact

the service department listed either by telephone

or by e-mail.

■ You can return a defective product to us free of

charge to the service address that will be provided

to you. Ensure that you enclose the proof of pur-

chase (till receipt) and information about what the

defect is and when it occurred.

You can download these instructions along

with many other manuals, product videos

and software on www.lidl-service.com.

Service

Service Great Britain

Tel.: 0871 5000 720 (£ 0.10/Min.)

E-Mail: k[email protected]

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (oﬀ peak))

E-Mail: k[email protected]

IAN 279393

Seite laden ...

Silvercrest SSP 2600 A1 Operating Instructions Manual

Marke: Silvercrest

Modell: SSP 2600 A1

Typ: Operating Instructions Manual

PDF Herunterladen

Bericht

in anderen Sprachen

English: Silvercrest SSP 2600 A1

Silvercrest SSP 2600 A1 Operating Instructions Manual

Silvercrest SSP 2600 A1 Operating Instructions Manual

in anderen Sprachen

Verwandte Papiere

Sonstige Unterlagen