Vestfrost VTS256 Benutzerhandbuch

USER MANUAL - EN

BEDIENUNGSANLEITUNG - DE

NOTICE D’UTILISATION - FR

MODELS - ULTF 40 VTS098 VTS252 VTS254 VTS256 VTS258

BIOMEDICAL SOLUTIONS

FREEZERS

GEFRIERGERÄTE

CONGÉLATEURS

Vestfrost Solutions 3

EN

CONTENTS

WARNING � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4

PRODUCT DESCRIPTION � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7

Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Room climate classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

FREEZER COMPONENTS � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10

Front & internal view . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Backview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Sensor placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Display components . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

INSTALLATION AND START-UP � � � � � � � � � � � � � � � � � � � � � � � � � � � 15

Ventilation guards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Battery backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Location and ventiltation . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Levelling the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Porthole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Remote alarm function . . . . . . . . . . . . . . . . . . . . . . . . . . 21

INTERIOR FITTING � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 22

CONTROLLER- OPERATION AND FUNCTION � � � � � � � � � � � � � � � � � � � 23

Models VTS252/254/256/258 . . . . . . . . . . . . . . . . . . . . . . . 23

Models VTS098-ULTF040 . . . . . . . . . . . . . . . . . . . . . . . . . 29

MAINTENANCE � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 30

GENERAL INFORMATION � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 31

Warranty, spare parts and service . . . . . . . . . . . . . . . . . . . . . 31

DISPOSAL � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 32

4 Vestfrostsolutions.com

EN

WARNING

As the appliance contains a ﬂammable refrigerant, it is essential

to ensure that the refrigerant pipes are not damaged.

The quantity and type of the refrigerant used in your appli-

ance is indicated on the rating plate�

Standard EN378 speciﬁes that the room in which you install your

appliance must have a volume of 1m³ per 8 g of hydrocarbon

refrigerant used in the appliances. This is to avoid the formation

of ﬂammable gas/air mixtures in the room where the appliance is

located in the event of a leak in the refrigerant circuit.

WARNING:

Keep ventilation openings in the appliance’s cabinet or in the

built-in structure clear of obstruction.

WARNING:

Do not use other mechanical devices or other means to accel-

erate the defrosting process than those recommended by the

manufacturer.

WARNING:

Do not damage the refrigerant system.

WARNING:

Do not use electrical appliances inside the refrigerated storage

compartment, unless they are of a type recommended by the

manufacturer.

WARNING:

Do not expose the appliance to rain, and secure not splashing

water when cleaning the ﬂoor.

WARNING:

This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental ca-

pabilities or lack of experience and knowledge if they have been

Vestfrost Solutions 5

EN

given supervision or instruction concerning use of the appliance

in a safe way and understand the hazards involved.

WARNING:

Children shall not play with the appliance.

WARNING:

Cleaning and user maintenance shall not be made by children

without supervision.

WARNING:

Do not store explosives, such as aerosol cans with ﬂammable

propellants in the unit.

WARNING:

Danger risk of ﬁre or explosion if ﬂammable refrigerant are used.

To be repaired only by trained personnel.

WARNING:

When positioning the appliance, ensure the power cord is not

trapped or damaged.

WARNING:

Do not locate multiple portable socket-outlets or portable power

supplies at the rear of the appliance.

WARNING:

Sharp edges on cabinet, compressor compartment, evaporator,

ventilation cover and on internal equipment can occur. Please be

aware to avoid injury.

WARNING:

The condenser on the back of the appliance will in some cases

have a hot surface. Please be aware to avoid injury.

6 Vestfrostsolutions.com

EN

WARNING:

The appliance must be connected to power minimum 12 hours

before using it for storage of medicine.

● Always keep the keys in a separate place and out of reach of chil-

dren.

● Do not step on the lower panel to reach medicine in the top of the

appliance.

● Before servicing or cleaning the appliance, unplug the appliance

from the mains or disconnect the electrical power supply.

● If the supply cord is damaged, it must be replaced by the manu-

facturer, its service agent, or similarly qualiﬁed persons in order to

avoid a hazard.

● Relevant for Australia: Supply cord ﬁtted with a plug complies

with AS/NZS 3112.

● Frost formation on the interior evaporator wall and upper parts is a

natural phenomenon. Therefore, the appliance should be defrosted

during normal cleaning or maintenance.

● Please note that changes to the appliance construction will cancel

all warranty and product liability.

● This device is intended to be used exclusively for medical pro-

ducts.

● If medicine is spilled in the appliance or the defrost water canal is

has to be cleaned immediately to avoid the medicine to evaporate

to the surroundings.

● If the instructions is lost please contact your supplier of the appli-

ance to have a new instruction for use.

● If service needed to this device, please be aware of only using

service personnel with education in handling medical devices.

Vestfrost Solutions 7

EN

Before use

This user manual is intended for the following product models:

We recommend that you read this user manual before using the unit for the ﬁrst time. Vestfrost

Solutions does not guarantee safe operation if the unit is used for anything other than its intended

use. Contents of the user manual can be subject to change without notice.

This manual should be considered an integral part of the unit and should be stored close to the

unit and be easy to access.

For current versions of the manual, please visit https://www.vestfrostsolutions.com/biomedical/.

Before operating your new appliance, please read the following instructions carefully:

1. Check to ensure the appliance has not been damaged during transport. Transport damage

should be reported to the transporter delivery.

2. The foil on the shelves must be removed before cleaning and using the unit.

3. Clean the inside of the cabinet using warm water with a mild detergent. Use a soft cloth and

rinse with clean water and dry thoroughly.

4. Allow the freezer to stay at an upright position for at least one hour before switched on.

5. Allow the freezer to operate at the desired temperature for a minimum of 12 hours before

loading.

PRODUCT DESCRIPTION

Tabletop Undercounter Upright

ULTF 40 VTS 098 VTS 252

VTS 254

VTS 256

VTS 258

8 Vestfrostsolutions.com

EN

Electrical connection

Wiring and connections in power supply systems must been all applicable (local and national)

electrical codes. Consult these codes lengths and sizes prior to cabinet installation.

This device complies with relevant EU directives including Low Voltage Directive 2014/35/EU and

Electromagnetic Compatibility Directive 2014/30/EU

The socket should be freely accessible.

Connect the appliance only to 220/240V / 50Hz alternating current via a correctly installed earthed

socket.

The socket must be fused with a 10A or 13A fuse.

If the appliance is to be operated in a non-European country, check on the rating plate whether

the indicated voltage and current type correspond to the values of your mains supply.

Data regarding voltage and obsorbed power / current are given on the rating plate.

The power cord may be replaced by a technician only.

The rating plate provides various technical information as well as type and serial number.

Product number

Vestfrost Solutions 9

EN

Intended use

Vestfrost biomedical freezers are designed to provide reliable temperature stability and precision

and ensure an ideal cold temperature storage for sensitive items is achieved. The products are

designed for the following operating ranges:

WARNING: This unit is not a “rapid-freeze” device. Freezing large quantities of liquid,

or high-water content items, will temporarily increase the chamber temperature and will cause

the compressors to operate for a prolonged time period. Avoid opening the door for extended

time periods since chamber temperature air will escape rapidly. Also, keep the inner doors closed

as much as possible. When room air, which is higher in humidity, replaces chamber air, frost may

develop in the chamber more rapidly.

Models ULTF40/ VTS098 VTS252 VTS254 VTS256 VTS258

Temperature range -60°C to -86°C -15°C to -30°C -25°C to -45°C -40°C to -60°C -60°C to -86°C

Fabric Set Point -82°C -25°C -45°C -61°C -82°C

Ambient Temperature +16ºC to +32ºC +16ºC to +32ºC +16ºC to+ 32ºC +16ºC to +32ºC +16ºC to +32ºC

Relative humidity MAX 70 % MAX 70 % MAX 70 % MAX 70 % MAX 70 %

Number of probes 1 1 1 1 1

Room climate classes

Room climate

class

Max room

temperature

°C

Relative

humidity

%

3 25 60

4 30 55

5 40 40

7 35 75

The climate class is stated on the nameplate. This specifies the optimum room temperature.

10 Vestfrostsolutions.com

EN

FREEZER COMPONENTS

Front & internal view

1. Display – With integrated keyboard

2. USB port – Export historical data. See chapter Display components

3. Light – Only when door is opened

4. Lock – Push and turn lock. ´´Insert the key into the keyhole and push and turn the

key 180 degrees clockwise´´.

5. Porthole – Hole for external sensor and CO² backup.

See chapter Installation and Start-up

6. Vacuum release – Ensure the door opens easily.

IMPORTANT makesure its free of ice. See chapter Maintenance

7. Inner doors – Make sure to close correctly to prevent cold air from escaping

(Is only on VTS 258)

8. Door contact – Can be both a magnetic or mechanical contact.

9. Shelf. See chapter Installation and Start-up

10. Door handle

11. Feet / Adjustable feet – some have antislip. See installation and start-up

12. Wheels – With or without breaks

13. Battery backup button – It will take 10 days for the battery to be fully charged.

See chapter Installation and Start-up

9

4

1

2

8

9

6

10

7

12

11

10

5

3

2

9

10

4

11

1

4

2

6

3

8

5

1

8

13

Vestfrost Solutions 11

EN

Backview

1. Ventilation guards.

See chapter Installation and Start-up.

2. Rating plate.

3. Porthole – Hole for external sensor and CO2 backup.

See chapter Installation and Start-up

4. Voltage free contact.

See chapter Remote alarm function for more information.

5. Battery backup button – It will take 10 days for the battery to be

fully charged.

See chapter Installation and Start-up

6. Power supply – IEC plug or hardwired.

1

2

6

4

5

3

12 Vestfrostsolutions.com

EN

Sensor placement

1. TR3 – Regulating probe.

2. External sensor – Use a 3.5mm cable tie to mounting for external

sensor. The cable tie can be found in the plastic bag.

2

1

Vestfrost Solutions 13

EN

Display components

Operation – main view:

1. The temperature in the appliance

(measured by the TR3 probe)

2. Time and date

3. ALARM icon. Flashing by alarm turned

on when there has been an alarm, but the

alarm is no longer active.

4. Logging icon. Turned Off if no logging.

Turned On when logging.

5. Memory icon. Turned On when the

memory is 90% full. Flashing when the

memory is full, and the controller is delet-

ing the oldest logging data.

6. Memory bar. Shows the status of the

memory.

Keys – main view:

7. Enter the Set Point menu of the tempera-

ture.

8. Enter the Service menu.

9. Enter the Data Logging menu.

10. Enter the Alarm menu.

Models VTS252/254/256/258

(7)

(8) (9) (10)

14 Vestfrostsolutions.com

EN

LEDS

Each LED function is described in the following table.

LED MODE Function

ON Compressor enabled

Flashing Anti-short cycle delay enabled

ON An alarm is occurring

ON Recording activated

ON Battery status OK

Flashing Battery is beeing charged

Flashing Charging problem or battery failure

°C/°F ON Measurement unit

°C/°F Flashing Programming phase

Buttons

SET

To display target set point in programming mode it selects a parameter og

conﬁrm an operation.

(UP) To enter fast access menu In programming mode it browses the

parameter codes or increases the displayed value.

(DOWN) In programming mode it browses the parameter codes or de-

creases the displayed value.

DATA

Export data from button.

Not relevant.

REC

Log activation and deactivation from button (Password protected).

Models VTS098/ULTF 40

Vestfrost Solutions 15

EN

The two ventilation guards are mounted

before moving the appliance to it’s ﬁnal

placement.

The guards function is to secure an absolute

minimum of ventilation, if the appliance is

pushed too close up against a wall.

Steps:

1. Mount the ventilation guards in the holes

behind the device.

Note!

(Some models have pre mounted ventilations

guards)

Undercounter

Upright

INSTALLATION AND START-UP

Ventilation guards

Tabeltop

16 Vestfrostsolutions.com

EN

The appliance is equipped with a battery back

up system, which supplies the controller with

power at power failure. The back up system

duration is 48 hours.

Steps:

1. Push the orange button to switch

on the battery backup system.

2. Check if the display for the battery

status-LED is ON

Note!

When starting up the appliance for the ﬁrst

time it is necessary to charge the battery for

10 days.

Note!

The battery backup system does not supply

the cooling system with power. When starting

up the appliance for the ﬁrst time it is neces-

sary to switch on the battery backup system.

Note!

The battery for backup should be changed

every third year to secure 48 hours of back

up. Please put this change in the maintenance

schedule for every third year.

Battery backup

Tabeltop

Undercounter

Upright

Vestfrost Solutions 17

EN

This unit must be installed according to the

below condition:

If the unit is installed in a location against the

below conditions, it’s speciﬁed performance

may not be achieved or malfunction and acci-

dence may occur.

1. A location not exposed to direct sunlight

2. A location where the unit is not exposed

to rain

3. In a dry, well ventilated room

According to the described in Intended

use

4. Away from sources of heat

5. In a location with minimal variations in

temperature

Secure ventilation, above, below and around

the appliance. See illustrations.

(All dimensions are in millimeter (mm).

Note!

There need to be space for the door to open

in at least 90 degrees.

Location and ventiltation

18 Vestfrostsolutions.com

EN

Make sure the appliance is level. It can be

levelled by rotating the adjustable feet of the

appliance.

Be certain to lock the breaks for units

equipped with casters.

1. For some models the ‘’antislip base’’

from the plastic bag and mount it on the

foot.

2. Adjust the four feet´until the unit is lev-

el.

Note!

Be certain to lock the breaks for units

equipped with casters.

Levelling the appliance

Vestfrost Solutions 19

EN

Portholes are used to pass the temperature

probe or nozzle of a back-up system in the

chamber.

Steps:

1. See chapter ´´Freezer components´´ for

placement of porthole on your device.

2. The rubber plug varies from the models.

Please see the illustrations to the left to

ﬁnd your type of porthole.

Porthole type 1:

1. Take out the two rubber plugs.

2. Press a pencil through the marks on the

inside of the rubber plugs.

3. Put your external sensor through the

porthole, in the same direction as the

arrow seen on the illustrations to the left

or as described below.

4. Put the sensor through the outer rubber

plug.

5. Then through the foam cylinder inside

the porthole.

6. Then through the inner rubber plug.

7. Use the cable tie to mount your sensor.

Porthole

20 Vestfrostsolutions.com

EN

Porthole type 2:

1. Take out the two rubber plugs.

2. Place your sensor wire in the plug.

3. Press the two plugs tight into the porthole

Use the cable tie from the helping plastic

bag to mount your sensor.

Note!

Use the cable tie to mount your sensor.

Please note that some units may not have

a speciﬁc placement to your external

sensor.

Seite laden ...

Vestfrost VTS256 Benutzerhandbuch

Dieses Handbuch ist auch geeignet für

Vestfrost VTS256 Benutzerhandbuch

in anderen Sprachen

Verwandte Papiere

Sonstige Unterlagen