CONDTROL 7-2-105 Benutzerhandbuch

22

Pento 360 / Quattro 360 G / Pento 360 G

EN CONTENTS

SAFETY INSTRUCTIONS 4

PRODUCT DESCRIPTION 5

DELIVERY PACKAGE 7

TECHNICAL SPECIFICATIONS 8

BEFORE START OPERATION 9

OPERATION 9

ACCURACY CHECK 11

CARE AND MAINTENANCE 15

UTILIZATION 16

WARRANTY 16

DE INHALT

SICHERHEITSHINWEISE 18

BESTIMMUNGSGEMAESSER GEBRAUCH 19

LIEFERUMFANG 21

TECHNISCHE DATEN 22

VOR INBETRIEBNAHME 23

BETRIEB 23

GENAUIGKEITSUEBERPRUEFUNG 25

PFLEGE 29

ENTSORGUNG 29

GARANTIE 30

WARTUNG UND REPARATUR 31

33

Pento 360 / Quattro 360 G /Pento 360 G

RU СОДЕРЖАНИЕ





 















 

PL SPIS TERŚCI





 

PARAMETRY TECHNICZNE 50







KONSERWACJA I EKSPLOATACJA 57

UTYLIZACJA 58

GWARANCJA 58

user manual

CROSS LINE LASER

EN

44

Pento 360 / Quattro 360 G / Pento 360 G

Congratulations on your purchase of the laser level XLiner Pento 360

/ Quattro 360 G / Pento 360 G CONDTROL. Safety instructions can

be found in the end of this user manual and should be carefully read

before you use the device for the first time.

SAFETY INSTRUCTIONS

Attention! This user manual is an essential part of this product.

The user manual should be read carefully before you use the product

for the first time. If the product is given to someone for temporary

use, be sure to enclose user manual to it.

- Do not misuse the product

- Do not remove warning signs and protect them from abrasion,

because they contain information about safe operation of the

product.

- Do not look into the laser beam or its reflection, with unprotected

eye or through an optical device. Do not point the laser beam at

people or animals without the need. You can dazzle them.

- To protect your eyes close them or look aside.

- Always install the product in such a way, so that laser line is below

or above eye level.

- Do not let unauthorized people enter the zone of product operation.

- Store the product beyond reach of children and unauthorized

people.

- Do not disassemble or repair the product yourself. Entrust product

repair to qualified personnel and use original spare parts only.

- Do not use the product in explosive environment, close to flammable

materials.

LASER RADIATION!

Do not stareinto beam

Class 2 laser

<1 mW, 635/515 nm

IEC 60825-1: 2007-03

user manual

EN

55

CROSS LINE LASER

Pento 360 / Quattro 360 G /Pento 360 G

- Laser intensive glasses are used for better recognition of the laser

beam; do not use them for other purposes. Laser glasses do not

protect from laser radiation as well as ultraviolet radiation and reduce

color perception.

- Avoid heating the battery to avoid the risk of explosion and

electrolyte leakage. In case of liquid contact with skin, wash it

immediately with soap and water. In case of contact with eyes, flush

with clean water during 10 minutes and consult the doctor.

PRODUCT DESCRIPTION

Cross line lasers XLiner Pento 360 / Quattro 360 G / Pento 360 G

CONDTROL are intended to project vertical and horizontal planes and

lines as well as the laser dot (zenith and nadir). The laser levels are

suitable for use at both indoor and outdoor building areas.

The cross line laser has 2 operating modes:

- Automatic leveling to compensate irregularities within self-

leveling range of ± 3.5°;

- Locked compensator, to project inclined planes and lines.

Pulse mode allows using laser receiver to increase the working range

of the laser level or to work when laser is hard to define in bright

lighting conditions.

user manual

CROSS LINE LASER

EN

66

Pento 360 / Quattro 360 G / Pento 360 G

1 - Laser exit windows

2 - Control panel

3 - Battery cover

4 - Thread 1/4’’ for mounting on a tripod

5 - Thread 5/8’’ for mounting on a tripod

6 - Switch bar

7- Hole for mounting on a screw/nail

1

4 - Thread 1/4’’ for mounting on a tripod

5 - Thread 5/8’’ for mounting on a tripod

3

45

6

CROSS LINE LASER

2

7

user manual

EN

77

CROSS LINE LASER

Pento 360 / Quattro 360 G /Pento 360 G

Control panel

1. Switch on/off:

- the laser level;

- laser planes.

2. Switch on/off pulse mode

3. Power indicator

4. Locked mode indicator

5. Pulse mode indicator

DELIVERY PACKAGE

XLiner Pento 360/Quattro 360 G/Pento 360 G

Laser level, battery (7.4V 2600mAh Li-ion) 2 pcs, charger, user manual,

bag.

XLiner Pento 360 Kit/Quattro 360 G Kit/Pento 360 G Kit

Laser level, battery (7.4V 2600mAh Li-ion) 2 pcs, charging cable,

magnetic target, wall mount, clamp, user manual, plastic case.

1 2

3 5

4

user manual

CROSS LINE LASER

EN

88

Pento 360 / Quattro 360 G / Pento 360 G

TECHNICAL SPECIFICATIONS

XLiner

Pento 360

XLiner

Quattro 360 G

XLiner

Pento 360 G

Working range/with

receiver 40 /1 00 m* 60/100 m*

Accuracy ±0,2 mm/m

Self-leveling range ± 3,5°

Continuous operating time >18 hours >8 hours

Operating temperature -10°C ... +50°C

Storage temperature 

Relative humidity 90%

Dust and water protection

rate IP54

Thread for mounting on

a tripod 1/4’’ and 5/8’’

Laser

Class II

635 nm

< 1 mW

Class II

515 nm

< 1 mW

Power supply 7.4V 2600 mAh Li-ion

Dimensions 155x85x132 mm

Weight:

without battery

with battery

0,63 kg

0,73 kg

* The operating range may differ from the declared depending on the

lighting conditions.

user manual

EN

99

CROSS LINE LASER

Pento 360 / Quattro 360 G /Pento 360 G

BEFORE START OPERATION

Power supply

The laser level is powered via a 7.4V 2600mAh Li-ion battery included

in the delivery package.

Install/charge the Li-ion battery

Install the battery in the battery compartment, observing the polarity.

Use the battery included in the delivery package only.

If the power indicator on the control panel starts flashing red, the

battery must be charged.

The charging procedure is as follows:

1) Remove the battery from the laser level.

2) Connect the battery to the power source by a charging cable,

included in the delivery package. The power indicator on control

panel will be red while charging.

3) The battery charging time is about 3 hours.

4) Once the power indicator on control panel turns green, disconnect

the charger and install the battery in the battery compartment.

OPERATION

Place the laser level on a firm and stable surface or a tripod.

Move switch bar to select required operating mode:

1) Automatic leveling:

Move the switch bar to position ON.

The laser level will switch on.

Short press to switch on required lines. If the laser level is out

of the range of automatic compensation laser lines will flash 1 time

per second.

Short press to switch on/off the pulse mode.

To switch off the laser level move the switch bar to position OFF.

user manual

CROSS LINE LASER

EN

1010

Pento 360 / Quattro 360 G / Pento 360 G

2) Projection of inclined planes

The switch bar is in position OFF.

Press and hold during 2 seconds to switch on the laser.

Long press during 2 seconds to switch on required laser lines.

Switched on laser lines will flash each 5 seconds.

After all possible combinations of lines are switched on, the next long

press will switch off the laser level.

Long press during 2 seconds to switch on/off the pulse mode.

Attention! To increase operating time and avoid the risk of

unintentional blindness switch the laser on only when you are ready

to work.

If operated near objects or air streams with the temperature different

from the environment the laser line may tremble due to heterogeneity

of the atmosphere. The longer the distance, the more trembling of the

laser line can be observed.

The width of the laser line increases as soon as operating distance

increases as well. The layout should be made along the axis of the laser

line. For maximum accuracy, use the middle portion of the laser line.

It should be noted that the shape of the laser line on the object’s

surface (e.g., walls, ceilings, etc.) depends on the curvature and tilt of

the surface relative to the laser line.

user manual

EN

1111

CROSS LINE LASER

Pento 360 / Quattro 360 G /Pento 360 G

Bluetooth

Bluetooth is always on by default. Switch on the laser level. Activate

Bluetooth at your portable device and start the app “XLiner Remote”.

Perform connection via Bluetooth. The app allows switching on and

off the laser lines and dots, receiver mode, as well as adjust the

brightness of the laser for optimal visibility and energy saving and

control the battery charge level without touching the laser level.

ACCURACY CHECK

Check of horizontal line

Use 2 parallel vertical walls which are located opposite each other at

a distance of 5 m.

1. Set the instrument close to the wall A (see Fig. A). Switch on the

vertical and horizontal laser emitters, unlock the compensator. Turn

the instrument in such a way so that the laser lines intersecting each

other are projected on the near wall A opposite the instrument. Mark

the point where laser lines intersect each other as A1.

A

5m

user manual

CROSS LINE LASER

EN

1212

Pento 360 / Quattro 360 G / Pento 360 G

2. Turn the instrument by 180°, mark the point where laser lines



B

3. Move the instrument to the opposite wall B and set it in such a way

so that the point where laser lines intersect each other would be on the

same level with point B2. (see Fig. C).

C

user manual

EN

1313

CROSS LINE LASER

Pento 360 / Quattro 360 G /Pento 360 G







D



distance exceeds 2 mm, please contact service center.

user manual

CROSS LINE LASER

EN

1414

Pento 360 / Quattro 360 G / Pento 360 G

Check of vertical line

Use a plumb bob as a reference of a vertical line. Place the instrument

at distance of 1,5m from the plumb bob.

1. Unlock the compensator, switch on the vertical laser line and align it

with the low point of plumb bob.

2. If deviation between the laser line and the plumb bob line exceeds

±0.2 mm per 1m of the plumb bob length (for a 2.5m plumb bob

deviation shouldn’t exceed 0.5 mm) please contact service center.

3. Turn the instrument by 180° and align the vertical laser line with the

low point of plumb bob once again.

1,5m

user manual

EN

1515

CROSS LINE LASER

Pento 360 / Quattro 360 G /Pento 360 G

CARE AND MAINTENANCE

Attention! The laser level is an accurate optical mechanic device

and requires careful handling. Check the accuracy before using.

Maintenance of the following recommendations will extend the life

of the device:

- Keep the laser level, spare parts and accessories out of the reach of

children and unauthorized people.

- Transport the laser level with locked compensator only.

- Protect the device from shock, falls, and strong vibrations; do not

allow moisture, construction dust, and foreign objects to get inside

the laser level.

- In case moisture gets inside the laser level, first of all, remove the

battery, and then contact the service center.

- Do not store or use the laser level for a long time in high humidity

conditions.

- Arrange the accuracy check of the laser level occasionally (see the

paragraph «Accuracy check»).

- Clean the laser level with a soft damp cloth. Do not use harsh

chemicals, cleaning solvents or detergents.

- Wipe the laser aperture with a soft, lint-free cloth with isopropyl

alcohol.

Failure to comply with the following rules may result in leakage of

the electrolyte from the batteries and damage the laser level:

- Remove the battery from the laser level if it is not used for a long

time.

- Do not leave discharged battery in the device.

- Do not heat the battery.

user manual

CROSS LINE LASER

EN

1616

Pento 360 / Quattro 360 G / Pento 360 G

UTILIZATION

Expired tools, accessories and package should be passed for waste

recycle. Please send the product to the following address for proper

recycle:

CONDTROL GmbH

Wasserburger Strasse 9

84427 Sankt Wolfgang

Germany

Do not throw the product in municipal waste!



and their components must be collected separately and submitted to

environmentally friendly recycle of wastes.

WARRANTY

All CONDTROL GmbH products go through post-production control

and are governed by the following warranty terms. The buyer’s

right to claim about defects and general provisions of the current

legislation do not expire.

1) CONDTROL GmbH agrees to eliminate all defects in the product,

discovered while warranty period, that represent the defect in

material or workmanship in full volume and at its own expense.

2) The warranty period is 24 months and starts from the date of

purchase by end consumer (see the original supporting document).

3) The Warranty doesn’t cover defects resulting from wear and tear

or improper use, malfunction of the product caused by failure to

observe the instructions of this user manual, untimely maintenance

and service and insufficient care, the use of non-original accessories

and spare parts. Modifications in design of the product relieve the

seller from responsibility for warranty works. The warranty does not

cover cosmetic damage, that doesn’t hinder normal operation of the

product.

4) CONDTROL GmbH reserves the right to decide on replacement or

repair of the device.

user manual

EN

1717

CROSS LINE LASER

Pento 360 / Quattro 360 G /Pento 360 G

5) Other claims not mentioned above, are not covered by the warranty.

6) After holding warranty works by CONDTROL GmbH warranty period

is not renewed or extended.

7) CONDTROL GmbH is not liable for loss of profit or inconvenience

associated with a defect of the device, rental cost of alternative

equipment for the period of repair.

This warranty applies to German law except provision of the United

Nations Convention on contracts for the international sale of goods

(CISG).

In warranty case please return the product to retail seller or send it

with description of defect to the following address:

CONDTROL GmbH

Wasserburger Strasse 9

84427 Sankt Wolfgang

Germany

Bedienungsanleitung

KREUZLINIENLASER

DE

1818

Pento 360 / Quattro 360 G / Pento 360 G

SICHERHEITSHINWEISE

Bitte lesen und befolgen Sie fuer die sichere Verwendung Ihres

Geraets alle Anweisungen. Warnschilder muessen stets sichtbar

und erkennbar sein. Bewahren Sie diese Bedienungsanleitung auf

und werfen Sie sie nicht weg. Bei nicht fachgerechter Anwendung

koennen Sie Laserstrahlung ausgesetzt sein.

Sie erhalten Ihr Geraet mit einem Warnschild in Englisch. Bitte

beachten Sie das hier abgebildete Warnschild in Deutsch.

Richten Sie den Laserstrahl niemals auf Personen oder Tiere. Blicken

Sie nicht in den Laserstrahl, auch nicht mit optischen Instrumenten.

Sie gefaehrden Ihr Augenlicht. Ihr Geraet erzeugt Laserstrahlung

der Klasse 2 gemaess EN60825-1. Die Laserbrille dient nicht als

Schutzbrille, sondern zur besseren Sichtbarkeit des Laserstrahls. Sie

bietet keinen Schutz vor Laserstrahlung. Die Laserbrille kann nicht

als Sonnenbrille verwendet werden. Der Einsatz im Strassenverkehr

ist verboten. Die Laserbrille schuetzt nicht vor UV-Licht und

verringert die Wahrnehmung von Farbunterschieden. Reparatur

und Wartung duerfen nur durch Fachpersonal mit Qualifikation

erfolgen, das originale Ersatzkomponenten einsetzt. Kinder duerfen

aus Sicherheitsgruenden das Geraet nur unter Aufsicht benutzen.

Verwenden Sie das Geraet nicht in der Naehe von brennbaren Stoffen,

da im Geraet Funken entstehen koennen. Die Halterung des Geraets

beinhaltet Magnete. Verwenden Sie sie daher nicht in der Naehe von

Herzschrittmachern, da deren Funktion durch Magnetfelder gestoert

werden kann. Vermeiden Sie ebenso die Naehe zu magnetischen

Datentraegern oder Geraeten, die auf Magnetfelder reagieren. Die

Folge koennen Datenloeschungen oder –zerstoerung sein.

LASERSTRAHLUNG!

Nicht in den strahl blicken

Laserklasse 2

<1 mW, 635/515 nm

IEC 60825-1: 2007-03

Bedienungsanleitung

DE

1919

KREUZLINIENLASER

Pento 360 / Quattro 360 G /Pento 360 G

BESTIMMUNGSGEMAESSER GEBRAUCH

Der Multiline –Kreuzlinienlaser Xliner Pento 360 / Quattro 360 G /

Pento360 G sollen vertikale und horizontale Ebenen und Linien sowie

den Laserpunkt (zenith und nadir) projizieren. Er ist fuer den Innen-

und Außenbereich geeignet.

Das Geraet hat zwei Betriebsarten:

- Mit Nivellierautomatik der Gehaeuseneigung bis zu ±3,5° zum

Erzeugen waagerechter und senkrechter Laser- Linien und –Ebenen.

- Zum Erzeugen von Laser- Linien und –Ebene mit jeglichen

Neigungen.

Der Pulsiermodus ist dazu bestimmt, die Reichweite mit dem

Handempfaenger zu erweitern oder die Laserstrahlen des Linienlasers

bei ungünstigen Umgebungsbedingungen zu lokalisieren.

Bedienungsanleitung

KREUZLINIENLASER

DE

2020

Pento 360 / Quattro 360 G / Pento 360 G

1 - Austrittsöffnung Laserstrahl

2 - Bedienfeld

3 - Batteriefachdeckel

4 - 1/4’’ Stativaufnahme

5 - 5/8’’ Stativaufnahme

6 - Pendelsperre

7 - Befestigungsmoeglichkeit fuer Nagel oder Schraube

1

1 - Austrittsöffnung Laserstrahl

3

45

6

KREUZLINIENLASER

2

7

Seite laden ...

CONDTROL 7-2-105 Benutzerhandbuch

CONDTROL 7-2-105 Benutzerhandbuch

in anderen Sprachen

Verwandte Papiere

Sonstige Unterlagen