10
GB IE NI
Technical specifications
Engine...........................4-stroke B&S575IS
Engine size.............................150 cm
3
(cc)
Power input......2.2 kW (3HP) @ 2900 min
-1
Blade rotation speed(n
0
)... max.2900 min
-1
Blade torque.................................. 45 Nm
Petrol tank volume ............................. 0.8 l
Octane rating ............................... 95-98
Engine oil tank volume .................. 0.47 l
Spark plug ...................Champion XC92YC
Cutting circle............................... 460 mm
Cutting height ........... 7-stage, 25~75 mm
Grass collection box volume ............... 60 l
Side discharge .................................. Yes
Mulching .......................................... Yes
Self-propelled.....................................Yes
front / rear Wheel......Ø 200 mm / 280 mm
Jerry can ........................................... 5 l
Weight (incl. accessories) .............. 35.5 kg
Sound pressure level
(L
PA
) .................... 81.0 dB(A); K=3.0 dB(A)
Sound power level (L
WA
)
measured .......94.2 dB(A); K=1.79 dB(A)
guaranteed ............................ 96 dB(A)
Vibration at the handle
(ah)............ 6,67/5,69 m/s
2
; K=1.5 m/s
2
Charger:
Model number....................IS12C- 593562
Rated Input voltage and current
...100 – 240V ~ (AC), 50 / 60 Hz, 0.8 A
Rated Output voltage and current
.....................................12.45V
, 2 A
Protection class ................................ II
Electric starter battery:
Model number................IS12B - 593560
Battery type.............................. Lithium-Ion
Rated voltage ...........................10.8 V
Battery capacity .......................... 1.15 Ah
Rated Energy .......................... 12.4 Wh
Charging time....................approx. 50 min
Noise and vibration values have been
determined according to the standards
and regulations mentioned in the
declaration of conformity.
Technical and optical changes can be
carried out in the course of further
development without notice. All
dimensions, references and information
of this instruction manual are therefore
without guarantee.
Legal claims, which are made on the
basis of the instruction manual, cannot
thus be considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at
protecting the user should be based
on estimated exposure under actual
usage conditions (all parts of
the operating cycle are to be
considered, including, for example,
times during which the power tool
is turned off and times when the
tool is turned on but is running idle).