IKEA RENLIGFWM Benutzerhandbuch

Marke: IKEA

Modell: RENLIGFWM

Kategorie: Waschmaschinen

Typ: Benutzerhandbuch

RENLIG

FWM6

ENGLISH 4

DEUTSCH 33

Contents

Safety information 4

Safety instructions 5

Product description 7

Control panel 8

Before first use 10

Daily Use 10

Programmes 14

Consumption values 19

Hints and tips 20

Care and cleaning 21

Troubleshooting 24

Technical data 28

ENVIRONMENT CONCERNS 29

IKEA GUARANTEE 30

Subject to change without notice.

Safety information

Before the installation and use of the appliance, carefully read

the supplied instructions. The manufacturer is not responsible if

an incorrect installation and use causes injuries and damages.

Always keep the instructions with the appliance for future

reference.

Children and vulnerable people safety

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the

hazards involved.

• Do not let children play with the appliance.

• Children of less than 3 years should be kept away unless

continuously supervised.

• Keep all packaging away from children.

• Keep all detergents away from children.

• Keep children and pets away from the appliance door when

it is open.

• If the appliance has a child safety device, we recommend you

activate it.

ENGLISH

• Cleaning and user maintenance shall not be made by

children without supervision.

General Safety

• Do not change the specification of this appliance.

• Obey the maximum load volume of 6 kg (refer to the

“Programme chart” chapter).

• The operating water pressure (minimum and maximum) must

be between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa).

• The ventilation openings in the base (if applicable) must not

be obstructed by a carpet.

• The appliance is to be connected to the water mains using

the new supplied hose-sets. Old hose sets must not be

reused.

• If the supply cord is damaged, it must be replaced by the

manufacturer, its Authorised Service Centre or similarly

qualified persons in order to avoid a hazard.

• Before maintenance, deactivate the appliance and

disconnect the mains plug from the mains socket.

• Do not use water spray and steam to clean the appliance.

• Clean the appliance with a moist soft cloth. Only use neutral

detergents. Do not use abrasive products, abrasive cleaning

pads, solvents or metal objects.

Safety instructions

Installation

• Remove all the packaging and the transit

bolts.

• Keep the transit bolts. When you move

the appliance again you must block the

drum.

• Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

• Do not install or use a damaged

appliance.

• Obey the installation instruction supplied

with the appliance.

• Do not install or use the appliance where

the temperature is less than 0 °C or

where it is exposed to the weather.

• Make sure that the floor where you

install the appliance is flat, stable, heat

resistant and clean.

• Make sure that there is air circulation

between the appliance and the floor.

ENGLISH 5

• Adjust the feet to have the necessary

space between the appliance and the

carpet.

• Do not install the appliance where the

appliance door can not be fully opened.

Electrical connection

• The appliance must be earthed.

• Always use a correctly installed

shockproof socket.

• Make sure that the electrical information

on the rating plate agrees with the

power supply. If not, contact an

electrician.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug and to the mains cable.

Should the mains cable need to be

replaced, this must be carried out by our

Authorised Service Centre.

• Connect the mains plug to the mains

socket only at the end of the installation.

Make sure that there is access to the

mains plug after the installation.

• Do not touch the mains cable or the

mains plug with wet hands.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains

plug.

• Only for UK and Ireland: The appliance

has a 13 amp mains plug. If it is

necessary to change the fuse in the

mains plug, use a 13 amp ASTA (BS

1362) fuse.

• This appliance complies with the E.E.C.

Directives.

Water connection

• Make sure not to cause damage to the

water hoses.

• Before you connect the appliance to new

pipes or pipes not used for a long time,

let the water flow until it is clean.

• The first time you use the appliance,

make sure that there is no leakage.

Use

Warning! Risk of injury, electrical

shock, fire, burns or damage to

the appliance.

• Use this appliance in a household only.

• Obey the safety instructions on the

detergent packaging.

• Do not put flammable products or items

that are wet with flammable products in,

near or on the appliance.

• Make sure that you remove all metal

objects from the laundry.

• Do not put a container to collect possible

water leakage under the appliance.

Contact the Authorised Service Centre to

ensure which accessories can be used.

• Do not touch the glass of the door while

a programme operates. The glass can be

hot.

Service

• To repair the appliance contact an

Authorised Service Centre.

• Use original spare parts only.

Disposal

Warning! Risk of injury or

suffocation.

• Disconnect the appliance from the mains

supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent

children and pets to get closed in the

appliance.

ENGLISH

Product description

Appliance overview

1 2

Detergent dispenser drawer

Control panel

Door opening handle

Rating plate

Adjustable feet

Detergent dispenser drawer

Compartment for powder or liquid

detergent used for main wash. If using liquid

detergent, pour it just before starting the

programme.

Compartment for liquid additives (fabric

softener, starch).

Follow the product manufacturer’s recommendations on quantities to use and do

not ever exceed the «MAX» mark in the detergent dispenser drawer. Any fabric

softener or starching additives must be poured into the compartment before

starting the wash programme.

Caution! If you wish to carry out the prewash, pour the detergent among

washing items into the drum.

ENGLISH 7

Caution! Depending on the type detergent you use (powder of liquid), ensure

that the flap, placed in the main wash compartment, is in the desired position.

Child safety device

This appliance incorporates a special feature to prevent children and pets becoming

trapped inside the drum.

Make sure that children or pets do not climb into the drum. Please check into the drum

before using it.

To activate this device, rotate the button

clockwise (without pressing it) inside the door

until the groove is horizontal. If necessary use

a coin.

To disable this device and restore the

possibility of closing the door, rotate the

button anticlockwise until the groove is

vertical.

Control panel

Control panel description

90˚

60˚

40˚

30˚

30'

1 2 3

5 467

Programme knob

Delay Start button

Programme phase indicators:

• - Washing

• - Extra Rinse

• - End of cycle

Start/Pause button

Super Quick button

ENGLISH 8

Spin button :

• Automatic speed reduction

• Rinse Hold position

Temperature button

Programme knob It allows you to switch the appliance On/Off and/or to select a

programme.

Delay Start button The programme can be delayed from 30 min - 60 min - 90min, 2

hours and then by 1 hour up to a maximum of 20 hours by

means of this button.

Programme phase indi-

cators:

• - Washing

•

- Extra Rinse

• - End of cycle

When you start the programme and press button , the indica-

tor

illuminates. The appliance starts working and the door is

locked.

The indicator

illuminates when you select a permanent extra

rinse option. This appliance is designed for saving water. How-

ever, for people with very delicate skin (allergic to detergents) it

may be necessary to rinse the laundry using an extra quantity of

water.

• To select a permanent extra rinse option: press simultaneous-

ly the buttons

and for some seconds until the indicator

illuminates.

• To delete the permanent extra rinse option: press simultane-

ously the buttons

and for some seconds until the indica-

tor

goes off.

The indicator

illuminates at the end of the washing cycle. Af-

ter a few minutes the door can be opened.

Start/Pause button This button allows you to start or to interrupt the selected wash-

ing programme.

Super Quick button By pressing this button, the appliance performs a short cycle for

lightly soiled items or for laundry which needs only freshening

up. We recommend you to reduce the fabric loading. The rele-

vant indicator illuminates.

ENGLISH 9

Spin button By pressing this button, you can select only one of the options.

The relevant indicator illuminates.

• - Automatic speed reduction

The spin speed is half reduced, but not less than 400 rpm (re-

fer to "Programmes" chapter for each programme maximum

spin speed).

• - Rinse Hold

The water of the last rinse is not emptied out to prevent the

fabrics from creasing. Before opening the door it will be nec-

essary to empty out the water. Even if the washing pro-

gramme is completed the drum turns regularly to prevent the

laundry creases. To empty out the water, please read the

paragraph «At the end of the programme».

Temperature button This button allows you to increase or decrease the washing tem-

perature. At the position , the appliance will perform a wash-

ing cycle with cold water.

Before first use

1. Ensure that the electrical and water

connections comply with the installation

instructions.

2. Remove any material from the drum.

Daily Use

Open the door

Open the door by carefully pulling the door

handle outwards.

Load the laundry

Place the laundry in

the drum, one item at

a time, shaking them

out as much as

possible.

By pushing the door

frame, close firmly the

door.

Measure out detergent and fabric

softenert

First check the flap position:

UP - Flap position if

using POWDER

detergent

DOWN - Flap

position if using

LIQUID detergent

during main wash

PUSH

REMOVE

TO CLEAN

PUSH

REMOVE

TO CLEAN

If the flap is not in the desired position:

ENGLISH 10

• Remove the drawer. Push the drawer

edge outwards where indicated by the

arrow (PUSH) to facilitate drawer

removal.

The flap is down and you wish to use

powder detergent:

PUSH

REMOVE

TO CLEAN

• Rotate the flap

upwards. Ensure to

fit the flap

completely in.

• Carefully put the

drawer back.

• Measure out the

detergent.

• Pour the powder

detergent into the

main wash

compartment .

The flap is up and you wish to use liquid

detergent:

PUSH

REMOVE

TO CLEAN

• Rotate the flap

downwards.

• Carefully put the

drawer back.

• Measure out the liquid detergent.

For the quantity of detergent,

refer always to what is written on

the product packing and ensure

that the detergent can be poured

in the drawer.

Pour the liquid detergent in the

compartment without exceeding the

limit indicated in the flap. The detergent

must be placed in the appropriate

compartments of the dispenser drawer

before starting the wash programme.

Warning! Do not use the flap in

DOWN position with:

• Gelatinous detergent or thick

detergent.

• Powder detergent.

• With programmes with

prewash.

• Do not use liquid detergent if

the washing programme

doesn't start immediately.

In all above listed cases, use the

flap in "UP" position .

Pour fabric softener

or any additives into

the compartment

marked (do not

exceed the «MAX»

mark in the drawer).

Any additives must be placed in the

appropriate compartments of the dispenser

drawer just before starting the wash

programme.

Select the required programme by turning

the programme selector dial

The appliance is now switched on. The

indicator of button starts to flash.

ENGLISH

At the end of the programme the selector

dial must be turned to position , to switch

the appliance off.

For the description of each wash

cycle, the compatibility among

the washing programmes and

the options, consult the chapter

«Programmes».

Warning! If you turn the

programme selector dial to

another programme when the

appliance is working, the red

indicator of button will flash 3

times to indicate a wrong

selection. The appliance will not

perform the new selected

programme.

Select the temperature by pressing button

By selecting a programme, the appliance

proposes automatically a default

temperature. Press button repeatedly to

increase or decrease the temperature, if

you want your laundry to be washed at a

different temperature.

If you select

position, the appliance will

perform a washing with cold water.

The relevant indicator illuminates.

Reduce the spin speed by pressing button

By selecting a programme, the appliance

proposes automatically the maximum spin

speed provided for that programme (see

the washing programmes tabe).

• Select position, if you want to reduce

the final spin by half speed.

• Select

position, if you want to

prevent your laundry from creasing.

The relevant indicator illuminates.

Select the available options by pressing

buttons and

Depending on the programme, different

options can be combined. These must be

selected after choosing the desired

programme and before starting the

programme.

When these buttons are pressed, the

corresponding indicators illuminate. When

they are pressed again, the indicators go

out. If an incorrect option is selected, the

integrated red indicator of button

flashes for 3 times.

For the compatibility among the

washing programmes and the

options see chapter

«Programmes».

Select the Delay Start by pressing button

Before you start the programme, if you wish

to delay the start, press button

repeatedly, to select the desired delay. The

relevant indicator illuminates.

You must select this option after you have

set the programme and before you start the

programme.

You can cancel or modify the delay time at

any moment, before you press button .

Selecting the delayed start:

1. Select the programme and the required

options.

2. Select the delay start by pressing button

3. Press button

• the appliance starts its countdown;

ENGLISH

• the programme will start after the

selected delay has expired.

Cancelling the delayed start after having

started the programme:

1. Set the washing appliance to PAUSE by

pressing button

2. Press button once, the indicator

relevant to the selected delay goes off.

3. Press button again to start the

programme.

The Delay Start cannot be

selected with DRAIN programme.

The selected delay can be

changed only after selecting the

washing programme again. The

door will be locked throughout

the delay time. If you need to

open the door, you must set the

appliance to PAUSE (by pressing

the button ) and then wait a

few minutes. After you have

closed the door, press the button

again.

Start the programme by pressing button

To start the selected programme, press

button , the corresponding green

indicator stops flashing. The indicators

corresponding to the running phase

illuminates. The appliance starts operating

and the door is locked.

To interrupt a programme which is running,

press button : the corresponding green

indicator starts to flash.

To restart the programme from the point at

which it was interrupted, press button

again.

If you have chosen a delayed start, the

appliance will begin the countdown.

If an incorrect option is selected, the red

indicator of button flashes 3 times.

Altering an option or a running

programme

It is possible to change some options before

the programme carries them out. Before

you make any change, you must PAUSE the

appliance by pressing button

Changing a running programme is possible

only by resetting it. Turn the programme

selector dial to

and then to the new

programme position. Start the new

programme by pressing button

again.

The washing water in the tub will be not

emptied out.

Interrupting a programme

Press button to interrupt a programme

which is running, the corresponding green

indicator starts to flash.

Press button again to restart the

programme.

Cancelling a programme

Turn the selector dial to to cancel a

programme which is running.

You can select now a new programme.

Opening the door

After the programme has started the door is

locked. If, for any reason, you need to open

it, set firstly the appliance to PAUSE by

pressing button . After a few minutes it

will be possible to open the door.

If the door remains locked, this means that

the appliance is already heating or that the

water level is too high. In any case, do not

try to force the door!

ENGLISH

If you cannot open the door but you need

to open it you have to switch the appliance

off by turning the selector dial to . After a

few minutes the door can be opened (pay

attention to the water level and

temperature!).

After closing the door, it is necessary to

select the programme and options again

and to press button

At the end of the programme

The appliance stops automatically. The

indicator of button and the indicator

corresponding to the just finished washing

phase goes off. The indicator

illuminates. After a few minutes the door

can be opened.

If a programme or an option that ends with

water left in the tub has been selected, the

indicator

illuminates but the door

remains locked to indicate that the water

must be emptied out before opening the

door.

During this time the drum continues to turn

at regular intervals until water draining.

1. Turn the programme selector dial to .

2. Select the draining or spinning

programme.

3. Reduce the spin speed if needed, by

pressing button .

4. Press button

At the end of the programme, the door can

be now opened. Turn the programme

selector dial to to switch the appliance

off.

Remove the laundry from the drum and

carefully check that the drum is empty. If

you do not intend to carry out another

wash, close the water tap. Leave the door

open to prevent any mildew and

unpleasant smells.

Stand by

Once the programme has finished the

energy saving system is enabled with the

pilot lights switched on. By pressing any

button the appliance will come out of the

energy saving status.

Programmes

Please always refer to the care label symbol of your garment and select the

washing programme based on what it says.

ENGLISH 14

Programme

Temperature

Type of

of Laundry

Cycle

Description

Max. Load

Red. Load

Available

Options

Detergent

Compartment

COTTONS

90° - 60° - 40° -

30° - (Cold)

White cot-

ton (heavy

normally

soiled

items).

Main wash

Rinses

Max. final spin at

1200 rpm

COTTONS + PRE-

WASH

90° - 60° - 40° -

30° - (Cold)

White and

coloured

cotton

(heavy -

normally

soiled

items).

Prewash

Main wash

Rinses

Max. final spin at

1200 rpm

COTTONS ECO

60° - 40°

White and

fast col-

oured cotton

economy,

lightly-

heavy soiled

items, shirts,

underwear.

Main wash

Rinses

Max. final spin at

1200 rpm

SYNTHETICS

60° - 40° - 30° -

(Cold)

Synthetic or

mixed fab-

rics: under-

wear, col-

oured gar-

ments, non-

shrink shirts,

blouses.

Main wash

Rinses

Max. final spin at

1200 rpm

1.5

DELICATES

40° - 30° -

(Cold)

Delicate

fabrics: for

example

curtains.

Main wash

Rinses

Max. final spin at

700 rpm

1.5

ENGLISH 15

Programme

Temperature

Type of

of Laundry

Cycle

Description

Max. Load

Red. Load

Available

Options

Detergent

Compartment

HANDWASH -

WOOL

40° - 30°- (Cold)

Special pro-

gramme for

wool gar-

ments and

delicate

fabrics

bearing the

«Pure new

wool, non-

shrink, ap-

pliance

washable»

and «hand

washing»

labels.

Main wash

Rinses

Max. final spin at

1200 rpm

RINSE

Cold

Single rinse

and spin to

starch or

soften hand

washed

garments.

Rinse

Max. final spin at

1200 rpm for syn-

thetics and deli-

cate

DRAIN

For empty-

ing out the

water of the

last rinse in

programmes

with the

Rinse Hold

option se-

lected.

Draining of water

ENGLISH 16

Programme

Temperature

Type of

of Laundry

Cycle

Description

Max. Load

Red. Load

Available

Options

Detergent

Compartment

SPIN

Separate

spin for

hand wash-

ed garments

and after

programmes

with the

Rinse Hold

option se-

lected. You

can choose

the spin

speed by

pressing the

relevant

button to

adapt it to

the fabrics

to be spun.

Max. final spin at

1200 rpm

MIX 20°

20°

Special pro-

gramme for

cotton, syn-

thetic and

mixed fab-

rics with

light soil. Set

this pro-

gramme to

decrease

the energy

consump-

tion

Main wash

Rinses

Max. final spin at

1200 rpm

ENGLISH 17

Programme

Temperature

Type of

of Laundry

Cycle

Description

Max. Load

Red. Load

Available

Options

Detergent

Compartment

EASY IRON

60° - 40° - 30° -

(Cold)

Synthetic

fabrics: se-

lecting this

programme

the laundry

is gently

washed and

spun to

avoid any

creasing. In

this way

ironing is

easier. Fur-

thermore

the appli-

ance will

perform ad-

ditional rin-

ses.

Main wash

Rinses

Max. final spin at

900 rpm

5 SHIRTS

30°

Synthetics

and mixed

fabrics. Suit-

able for 5 -

6 shirts

lightly

soiled.

Main wash

Max. final spin at

900 rpm

MINIPROGRAMME

30°

Synthetics

and deli-

cates. Light-

ly soiled

items or

which only

needs fresh-

ening up.

Main wash

Rinses

Max. final spin at

700 rpm

ENGLISH 18

Programme

Temperature

Type of

of Laundry

Cycle

Description

Max. Load

Red. Load

Available

Options

Detergent

Compartment

JEANS

60° - 40° - 30° -

(Cold)

Trousers,

shirts or

jackets in

denim and

jersey real-

ized with hi-

tech materi-

als. The Ex-

tra Rinse

option is ac-

tivated au-

tomatically.

Main wash

Rinses

Max. final spin at

1200 rpm

ON/OFF

Position to turn the appliance off or/and reset a programme.

If you select the SUPER QUICK option, we recommend you, to reduce the maximum load as indicated. (Red. load =

reduced load). Full loading is possible however with somewhat reduced cleaning results.

Standard programmes for the Energy Label consumption values. According to regulation 1061/2010, these pro-

grammes are respectively the «Standard 60°C cotton programme» and the «Standard 40°C cotton programme». They

are the most efficient programmes in terms of combined energy and water consumption for washing normally soiled

cotton laundry.

The water temperature of the washing phase may differ from the temperature declared for the selected

programme.

For cottons you can increase the final spin speed to 1200 rpm..

The appliance performs a short heating phase if the water temperature is below 20°C. The appliance can show the

temperature setting as “cold”.

Make sure that the detergent is for low temperature in order to have good washing results.

Consumption values

The data of this table are approximate. Different causes can change the data:

the quantity and type of laundry, the water and ambient temperature.

ENGLISH 19

Programmes Load (kg) Energy con-

sumption

(kWh)

Water con-

sumption (li-

tre)

Approximate

programme

duration (mi-

nutes)

Remaining

moisture

(%)

Cottons 60 °C 6 1,20 72 170 53

Cottons 40 °C 6 0,75 72 145 53

Synthetics 40 °C 3 0,60 57 95 35

Delicates 40 °C 3 0,60 65 75 35

Wool/Handwash

30 °C

2 0,30 48 55 30

Standard cotton programmes

Standard 60 °C cot-

ton

6 1,07 50 194 53

Standard 60 °C cot-

ton

3 0,79 44 172 53

Standard 40 °C cot-

ton

3 0,61 43 167 53

At the end of spin phase.

Off Mode (W) Left On Mode (W)

0.48 0.48

The information given in the chart above are in compliance with the EU Commission regu-

lation 1015/2010 implementing directive 2009/125/EC.

Hints and tips

Sorting out the laundry

Follow the wash code symbols on each

garment label and the manufacturer’s

washing instructions. Sort the laundry as

follows: whites, coloureds, synthetics,

delicates, woollens.

Removing stains

Stubborn stains may not be removed by just

water and detergent. It is therefore

advisable to treat them prior to washing.

Blood: treat fresh stains with cold water. For

dried stains, soak overnight in water with a

stain remover product then rub in the soap

and water.

Oil based paint: moisten with benzine stain

remover, lay the garment on a soft cloth

and dab the stain; treat several times.

Dried grease stains: moisten with

turpentine, lay the garment on a soft

ENGLISH 20

Seite laden ...

IKEA RENLIGFWM Benutzerhandbuch

Marke: IKEA

Modell: RENLIGFWM

Kategorie: Waschmaschinen

Typ: Benutzerhandbuch

PDF Herunterladen

Bericht

in anderen Sprachen

English: IKEA RENLIGFWM User manual

IKEA RENLIGFWM Benutzerhandbuch

IKEA RENLIGFWM Benutzerhandbuch

in anderen Sprachen

Verwandte Papiere