Anker Ultra-Slim 2.4G Benutzerhandbuch

Kategorie
Tastaturen
Typ
Benutzerhandbuch

Dieses Handbuch ist auch geeignet für

Ultra-Slim 2.4G Wireless Keyboard
Welcome Guide
1
Package Contents
Anker Ultra-Slim 2.4G Wireless Keyboard
USB wireless receiver
Welcome Guide
Product Overview
Wireless Specification 2.4G wireless
Product Dimensions
285 × 122 × 19mm
/ 11.2 × 4.8 × 0.7in (L × W × H)
Product Weight 189g / 6.7 oz
Operating Range Up to 10 meters / 33 feet
Modulation System GFSK
Battery Type 2 AAA batteries
Working Temperature -10°C to +55°C
Key Life 3 million clicks
System Requirements
Windows 8 / Windows 7
/ Windows Vista / Windows XP
2
Product Overview
1
.
Media
2
.
Play / Pause
3
.
Last Song
4
.
Next Song
5
.
Volume Up
6
.
Volume Down
7
.
Mute
8. Home
9. Search
10. Bookmark Webpage
11. Power Off
12. Insert
13. Print Screen
14. LED Indicator
3
15. Battery Insertion Slot
16. USB Wireless Receiver
17
.
On / Off Switch
4
Setup Instructions
1. Open the battery cover on the back of the keyboard and take it off.
2. Insert two AAA batteries (not included).
3. Take out the USB wireless receiver from the battery slot and plug it
into your computer’s USB port.
4. Replace the battery cover and you are ready to begin typing.
Replacing Batteries
When the batteries are running low, the LED indicator will turn red
and begin to flash. Replace the AAA batteries to continue typing.
Troubleshooting
If you have any problems using the keyboard, or you’re using a new
Anker receiver, try the following steps to pair the keyboard and
receiver together again:
1. Unplug the USB receiver and then plug it back into the computer
USB port.
2. Press the ESC and Q keys at the same time. The LED indicator will
flash rapidly for about 5 seconds and then go off. The receiver is now
successfully paired to your keyboard.
5
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the
party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
6
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure condition
without restriction.
7
Warranty
Our company provides customers with a warranty of 18 MONTHS
from the date of purchase.
Contact Us
For any inquiries or comments concerning our products, please send
an email to support@ianker.com, and we will respond to you as soon
as possible. If there is any quality-related issue with the product, you
may request a REPLACEMENT OR REFUND by submitting a request
form at www.ianker.com/support.
Statement
We’re only able to provide after-sales service for purchases made
directly from Anker. If you purchased through a different retailer,
please contact them for any exchange or refund requests.
Please note that unauthorized reselling of Anker products is
prohibited.
8
Packungsinhalt
Anker Ultra-Slim 2.4G Wireless Keyboard
USB Wireless Receiver
Bedienungsanleitung
Spezifikationen
Wireless Spezifikation 2.4G Wireless
Produktmaße 285 × 122 × 19 mm (L × B × H)
Produktgewicht 189 g
Reichweite Bis zu 10 m
Modulationssystem GFSK
Batterietyp 2 AAA Batterien
Betriebstemperatur -10°C to +55°C
Tastenlebensdauer 3 Millionen Klicks
Systemanforderungen
Windows 8 / Windows 7
/ Windows Vista / Windows XP
9
Produktübersicht
1
.
Media-Taste
2
.
Play / Pause
3
.
Letzter Song
4
.
Nächster Song
5
.
Lautstärke hoch
6
.
Lautstärke runter
7
.
Ton aus
8. Home
9. Suchen
10. Bookmark Website
11. Strom aus
12. Einfügen
13. Bildschirm drucken
14. LED Anzeige
Medi a
Insert
Prt Sc
niWlr
tC Ctrl
ÖÄ
#
Ü
+
*
µ
{
[
]
}
\
10
Aufbauanweisungen
Öffnen Sie das Batteriefach an der Rückseite der Tastatur und
nehmen Sie es ab.
1. Legen Sie zwei AAA Batterien (nicht mitgeliefert) ein.
2. Entnehmen Sie den USB Wireless Receiver aus dem Batteriefach
15. Batteriefach
16. USB Wireless Receiver
17. An/Aus Schalter
11
und stecken Sie ihn in den USB Port Ihres Computers.
3. Schließen Sie das Batteriefach und schon können Sie zu tippen
beginnen.
Batteriewechsel
Sobald die Batterien schwach werden wird die LED Anzeige rot und
beginnt zu blinken. Ersetzen Sie die AAA Batterien um mit dem
Tippen fortzusetzen.
Problemlösung
Sollten Probleme bei der Benutzung Ihrer Tastatur auftreten oder Sie
verwenden einen neuen Anker Receiver, versuchen Sie die folgenden
Schritte um Ihr Keyboard wieder mit dem Receiver zu pairen:
1. Ziehen Sie den USB Receiver aus dem USB Port und stecken Sie ihn
anschließend wieder ein.
2. Drücken Sie gleichzeitig die ESC- und Q-Taste. Die LED Anzeige
wird für ca. 5 Sekunden schnell blinken und dann erlöschen. Der
Receiver ist nun erfolgreich mit Ihrer Tastatur verbunden.
12
Garantie
Unser Firma bietet unseren Kunden eine Garantie von 18 Monaten ab
Kaufdatum.
Kontakt
Für Fragen betreffend unserer Produkte, schicken Sie bitte eine Email
an support@ianker.com, und wir werden Sie so schnell wie möglich
kontaktieren. Sollte es irgendein qualitätsbezogenes Problem mit dem
Produkt geben, können Sie ein Formular für Ersatz oder Rückgabe
einreichen unter http://www.ianker.com/support.
Stellungnahme
Wir sind nur in der Lage after-Sales Dienstleistungen für Käufe
anzubieten, welche direkt über Anker getätigt wurden. Wenn
Sie Ihr Produkt woanders erworben haben, kontaktieren Sie
den entsprechenden Verkäufer bitte bezüglich Umtausch- und
Rückgabefragen.
Bitte nehmen Sie zur Kenntnis, dass der unautorisierte
Weiterverkauf von Anker Produkten nicht gestattet ist.
1-800-988-7973 (U.S.) Mon-Fri 9:00-5:00 (PST)
069-9579-7960 (DE) Mon-Fri 6:00-11:00
www.ianker.com
support@ianker.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Anker Ultra-Slim 2.4G Benutzerhandbuch

Kategorie
Tastaturen
Typ
Benutzerhandbuch
Dieses Handbuch ist auch geeignet für

in anderen Sprachen